• 제목/요약/키워드: Type of bag

검색결과 197건 처리시간 0.022초

다단 에어셀 충진 밸브성형기술에 관한 연구 (A Study on the Forming Technology of Multi-stage Aircell Filling Valves)

  • 김미숙;박동삼
    • 한국산학기술학회논문지
    • /
    • 제18권12호
    • /
    • pp.57-64
    • /
    • 2017
  • 오늘날 EU환경규제로 포장용 완충재로 사용되는 EPS(스티로폼) 대체용 공기 충진 완충재는 출시 이후 점진적으로 시장이 확대되는 포장업계 블루칩이다. 공기충진형 완충재는 뛰어난 완충능력과 친환경성으로 EPS를 대체하여 빠르게 시장을 확장하고 있다. 기존 공기 충진 완충재에 대비하여 원료절감과 공정향상, 직관적 미관 향상을 모두 충족하는 새로운 선택 충진형 공기 충진재 제조기술이다. 본 연구는 다단 에어셀 충진 밸브성형기술은 선택충전 기술을 바탕으로, 밸브형성 구조기술을 적용하여 선택적으로 다양한 형태로 충진이 가능한 기술이다. 다단 에어셀 충진 밸브성형기술의 구조도는 밸브단이 구분된 제1주입필름, 밸브필름, 제2주입필름 등 3겹의 필름을 적층하여 복수의 주입구를 형성한 기술이다. 기존의 기술은 연결된 다수의 공기주머니에 공기를 주입하기 위한 별도의 외부 공기주입로가 필수적으로 구성되어야 하나, 본 연구는 공기 주머니의 내부에 외부 공기주입로가 형성되어 공기를 주입하기 위한 외부 공기주입로가 외견상 없어짐으로써 그에 따른 원재료 및 공정이 감소하고, 공기가 주입되어 원형 튜브로 팽창하는 과정에서 단면의 길이가 63~66%로 축소되는 공기주머니와 다르게 공기주입 후 내부 공기가 배출되고 단면이 원래의 길이를 유지하여 불필요하게 접힌 채 붙어 있는 외부 공기주입로를 내부에 일체화 하여 완충재의 미관이 향상되는 기술적 특징과 다수의 연속된 공기주머니에 선택적으로 공기를 충전할 수 있는 선택충전에 관한 것으로 기존 기술대비 뛰어난 차별성을 갖는 스마트한 공기충전형 완충재 제조 기술이다.

억새배지를 이용한 느타리 봉지재배 (Bag cultivation of Pleurotus ostreatus with Miscanths species substrates)

  • 유영진;강찬호;최규환;김효진;정종성;김희준;문윤호
    • 한국버섯학회지
    • /
    • 제12권2호
    • /
    • pp.122-126
    • /
    • 2014
  • 천연 억새 1년, 2년, 3년생의 화학성분 분석결과 인산은 증가하는 반면 칼슘과 칼리는 낮아지는 경향이었고 총 질소는 2년생 억새에서 증가하였고, 총 탄소는 3년생 억새에서 급격히 증가하는 경향으로 버섯배지의 이용성이 높게 평가되었다. 억새의 발효조건은 미강20%를 혼합할 경우 발효는 5일부터 5일간에 지속되고 이때 온도는 $50-55^{\circ}C$로 유지되어 고온성 미생물 군이 형성됨을 알 수 있었고 처리효과 구명은 미강20% 첨가발효배지가 무처리 억새배지보다 수량이 60% 향상되었다. 느타리봉지재배의 억새배지는 포플러톱밥50%의 포플러톱밥 20%를 억새발효배지 20%로 대체한 혼합배지인 포플러톱밥30%, 억새발효배지20%, 비트펄프30%, 면실박20% 배지를 개발하였다.

가정 폐기물이 SRF 바이오매스에 미치는 영향 - B시를 중심으로 (Effect of Household Garbage on the SRF Biomass - Based on the B city)

  • 박재우;이승원
    • 한국환경과학회지
    • /
    • 제30권6호
    • /
    • pp.455-463
    • /
    • 2021
  • This study investigated the biomass content of fluff type SRF(Solid refuse fuel) operated in B city according to the physical composition. As a result of analyzing the physical composition of SRF, it was investigated that papers 25.2%, fiber 15.1%, vinyl·plastics 42.6%, woods 9.4%, rubbers 1.5%, diapers 3.2% and incombustibles 3.0%. The average of ash and combustible content of SRF was 10.5% and 89.5%, and the higher the proportion of paper and wood, the lower proportion of ash. In addition, the biomass of SRF is 24.9%~58.0%, with an average of 42.6%.

헬스케어 가방의 ECG 센서 전극 위치에 따른 신호 분석 (Signal Analysis According to the Position of the ECG Sensor Electrode in Healthcare Backpack)

  • 이현석;정완영
    • 센서학회지
    • /
    • 제23권6호
    • /
    • pp.402-408
    • /
    • 2014
  • Heart rate is one of the most important signal to monitor the health condition of the patient or exerciser. Various wearable devices have been developed for the continuous monitoring of ECG signal from human body during exercise. Among these, ECG chest belt has been widely used. However wearing chest belt with ECG sensor is uncomfortable in normal life due to the electrode contact between metal electrodes of ECG sensor and skin of the human body. So we develop the royal healthcare backpack that can measure ECG signal without skin contact by using capacitor-type ECG sensor. The position of the measurement point is critical to collect a clear ECG signal in the capacitive ECG measurement from backpack. Various tests were conducted to find the optimal ECG measurement position which has less noise and could get strong and clear ECG signal during exercise, walking, hiking, mountain climbing and cycling.

실험계획법을 이용한 측면 에어백 인플레이터 최적 설계 (Optimizing Design of Side Airbag Inflator using DOE Method)

  • 김병우;허진
    • 한국정밀공학회지
    • /
    • 제28권10호
    • /
    • pp.1189-1195
    • /
    • 2011
  • For side airbag, the pipe type inflators have been wide used while the disk type inflators have been used for front airbag. For helping to prevent injury and death the airbag inflator system should be design with great care. The present study deal with optimizing the design of side airbag inflator by finite element analysis and design of experiment method. An optimization process was integrated to determine the optimum design variable values related to the side airbag inflator. Free shape optimization method has been carried out to find a optimal shape on an side airbag inflator model. Optimization of the air bag inflator was successfully developed using Sharpe optimization was carried out to find a new geometry. The improved results compared to the base design specification were achieved from design of experiment and optimization.

정면충돌 시 고령운전자 상해 특성에 관한 실사고 연구 (Real-world Accident Study on Injury Characteristics of Elderly Driver in Car-to-Car Frontal Crashes)

  • 홍승준;박원필
    • 한국자동차공학회논문집
    • /
    • 제19권2호
    • /
    • pp.12-19
    • /
    • 2011
  • Real-world accident cases were investigated to understand injury characteristics of the elderly driver. A total 10 cases of car-to-car frontal crash accidents from passenger car including SUV claimed to domestic car insurance company were reviewed. The injury characteristics of the elderly were analyzed from personal information (gender, age), medical treatment record (medical certificate, curative days), vehicle information (model, air-bag, seatbelt) and damage information. This study showed that elderly driver has higher possibility of thorax injury than non-elderly's. Moreover, Injury type and severity were more severe than non-elderly driver at similar type accident conditions. Also, elderly driver's medical treatment period needs 3 times more than non-elderly driver's.

섬유의 적층각을 고려한 다이아프램형 공기 스프링의 유한요소 해석 (Finite Element Analysis of Diaphragm Type Air Springs considering the Variation of Fiber Angles)

  • 이형욱;김세호;허훈;김진영;정수교
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 1999년도 춘계학술발표대회 논문집
    • /
    • pp.29-33
    • /
    • 1999
  • this paper concerned with the stress analysis of a diaphragm-type air spring which consists of rubber linings nylon reinforced rubber composite. The analysis is carried out with a finite element method developed to consider the orthotropic properties geometric non-linearity and contact between an air bag and a bead ring The material properties are evaluated with the Halpio-Tsai equations and the rule of mixture. The analysis results demonstrate the variation of the outer diameter the fold height and the vertical force with different models to the design a proper diaphragm air springs.

  • PDF

다중회귀모형을 이용한 벤츄리가 없는 충격기류식 여과집진장치 압력손실 예측 (Pressure Drop Predictions Using Multiple Regression Model in Pulse Jet Type Bag Filter Without Venturi)

  • 서정민;박정호;조재환;진경호;정문섭;이병인;홍성철;시바쿠마르;최금찬
    • 한국환경과학회지
    • /
    • 제23권12호
    • /
    • pp.2045-2056
    • /
    • 2014
  • In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.

인터레이싱 기법을 응용한 현대 패션 가방의 표현 유형과 미적 조형성 (Expression types and aesthetic formativeness of interlacing techniques applied to contemporary fashion bags)

  • 박이연;권기영
    • 복식문화연구
    • /
    • 제32권3호
    • /
    • pp.438-451
    • /
    • 2024
  • The interlacing technique has a long history of use as a means of creative expression and persists in modern society to satisfy the individual pursuit of pastimes. This method has the developmental potential to create new trends in the future. Interlacing techniques (e.g., basketry, plaiting, braiding, and knotting) are closely related to plastic arts fields, architecture, art, and industrial design where the various interlacing practices are applied. This research uses case analysis to study the types of expression found in the formative art field wherein the interlacing technique is applied. Results reveal several expressions, including optical illusion visual type, relief surface type, porous perspective type, and object borrowing type, all of which appeared in fashion bags. The aesthetic formativeness, which appeared in the fashion bags that applied interlacing techniques, was then classified according to geometric formative beauty in a process based on rules and order. Nature-friendly formative beauty reflecting handicraft locality and omnidirectional formative beauty by disordered deconstruction and heterogeneous combination were determined. The use of interlacing techniques that show creative, unique combinations and variations is expected to inspire the development and application of bag design that suits individual and original modern fashion trends. One limitation of this thesis is that it only studied cases appearing in modern fashion bags.

냉요법 적용방법에 따른 냉요법 효과에 관한 연구-건강한 성인 여성에서 스폰지 목욕방법을 중심으로 (A Study on the Effect of Cold Application Using a Sponge Bath in Healthy Adults)

  • 정현숙;강규숙;황애란
    • 대한간호
    • /
    • 제28권3호
    • /
    • pp.68-82
    • /
    • 1989
  • This study was a quasi-experimental research study to test the characteristics of temperature regulation according to sponge bath methods of cold application. Thirteen volunteers were selected from among nursing college students according to an established criteria using a purposive sampling technique. Four different cold application methods were used: $\circled1$ tepid water sponge bath at $28^{\circ}C$, $\circled2$ 20% alcohol sponge bath at $28^{\circ}C$, $\circled3$ 40% alcohol sponge bath at $28^{\circ}C$ and $\circled4$ tepid water sponge bath at 28$^{\circ}$C plus an ice bag to the head. Changes in rectal temperature, mean skin temperature, mean body temperature, heat content change and thermal discomfort during the cold application were measured at 5 minute intervals over a 120 minute period. The data collection period was from Dec. 20, 1988 to Feb. 3, 1989. The data were analyzed using descriptive statistics, simple regression, ANOVA, Duncan's multiple range test and Pearson correlation coefficient using the SPSS-X Program. The results of the study are summarized as follows. Five general hypothesis were tested. Hypothesis 1 that "Change in heat content will be decreased for each cold application method according to the cold application time" was rejected. (tepid water sponge bath: after 10 minutes of cold application, 20% alcohol sponge bath: after 25 minutes of cold application: 40% alcohol sponge bath: after 45 minutes of cold application, tepid water sponge bath plus an ice bag to the head: after 80 minutes of cold application) Hypothesis 2 that "Thermal discomfort will be changed for each cold application method according to the cold application time" was rejected after 5minutes of cold application. Hypothesis 3 that "Change in heat content will differ among the cold application methods" was accepted except 0~5, 0~10, 0~65, 0~105 and 0~120 minute. This difference showed significance only between sponge bath methods and tepid water sponge bath plus an ice bag to the head. Hypothesis 4 that "Thermal discomfort will differ among the cold application methods" was accepted at 15, 20, 35, 45, 75, 80, 90, 95, 100, 105, 110, 115 and 120 minute of cold application time. This difference showed significance only between sponge bath methods and tepid water sponge bath plus an ice bag to the head. Hypothesis 5 that "The higher the change in heat content, the higher the thermal discomfort during the cold application time" was accepted for between 10~60 and 75 minute of cold application. In conclusion, this study showed that in sponge bath at $28^{\circ}C$, 10~80 minute was a effective cold application time in the view of heat loss through the skin. Concerning the effects of evaporation and thermal discomfort, it was found that there was no difference with regard to the solutions; tepid water sponge bath; 20% alcohol sponge bath or 40% alcohol sponge bath at a $28^{\circ}C$ controlled solution temperature. So it was thought that the type of solution itself did not have a big influence on the heat loss through skin. The combined effect of sponge bath with an ice bag to the head showed a significant difference and also showed a slight increase in thermal discomfort. On the basis of this research it can be concluded that cold application, for example, an ice bag to the head during a tepid water sponge bath is a good method as it increase heat loss through conduction, although fit can also cause a slight increase in thermal discomfort. The correlation between changes in heat content and thermal discomfort were not high. So factors other than change in heat content are considered to have an effect on the cognition of thermal discomfort.

  • PDF