• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.703-710
• /
• 2010

In this study, a tactile stimulator was developed to resolve some problems from the previous version of the system such as system configuration, inappropriate stimulation control and additional problems. The developed tactile stimulator consists of control unit, drive unit and vibrator unit. The control unit was controlled by E-Prime software to generate appropriate vibration pulses. The drive unit supplies enough energy to the vibrator to generate effective stimulation pulses. The vibrator unit consists of small coin type vibrator and velcro, and was made to be attached at the hand easily. The developed tactile stimulator was designed by small-size, light-weight, low-power, simple-fabrication, max 35 channels and little delay time from instruction signal of E-Prime software to vibrator. The duration and magnitude of stimulation was controlled by 10 grades and the problems concerning stimulation control were compensated by wideband frequency ranges. Additionally, the electrical safety was ensured by low voltage operation. Vibrator was made to be attached on finger as well as on any part of the subject. Since this tactile stimulator is developed based on E-Prime software which is widely used in cognitive science, it is believed that this stimulator be suitable for the wide application of cognitive science study.

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.3-32
• /
• 1995

The Highway Capacity Manual specifies procedures for evaluating intersection performance in terms of delay per vehicle. What is lacking in the current methodology is a comparable quantitative procedure for ass~ssing the safety-based level of service provided to motorists. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections based on the relative hazard of alternative intersection designs and signal timing plans. Conflict opportunity models were developed for those crossing, diverging, and stopping maneuvers which are associated with left-turn and rear-end accidents. Safety¬based level-of-service criteria were then developed based on the distribution of conflict opportunities computed from the developed models. A case study evaluation of the level of service analysis methodology revealed that the developed safety-based criteria were not as sensitive to changes in prevailing traffic, roadway, and signal timing conditions as the traditional delay-based measure. However, the methodology did permit a quantitative assessment of the trade-off between delay reduction and safety improvement. The Highway Capacity Manual (HCM) specifies procedures for evaluating intersection performance in terms of a wide variety of prevailing conditions such as traffic composition, intersection geometry, traffic volumes, and signal timing (1). At the present time, however, performance is only measured in terms of delay per vehicle. This is a parameter which is widely accepted as a meaningful and useful indicator of the efficiency with which an intersection is serving traffic needs. What is lacking in the current methodology is a comparable quantitative procedure for assessing the safety-based level of service provided to motorists. For example, it is well¬known that the change from permissive to protected left-turn phasing can reduce left-turn accident frequency. However, the HCM only permits a quantitative assessment of the impact of this alternative phasing arrangement on vehicle delay. It is left to the engineer or planner to subjectively judge the level of safety benefits, and to evaluate the trade-off between the efficiency and safety consequences of the alternative phasing plans. Numerous examples of other geometric design and signal timing improvements could also be given. At present, the principal methods available to the practitioner for evaluating the relative safety at signalized intersections are: a) the application of engineering judgement, b) accident analyses, and c) traffic conflicts analysis. Reliance on engineering judgement has obvious limitations, especially when placed in the context of the elaborate HCM procedures for calculating delay. Accident analyses generally require some type of before-after comparison, either for the case study intersection or for a large set of similar intersections. In e.ither situation, there are problems associated with compensating for regression-to-the-mean phenomena (2), as well as obtaining an adequate sample size. Research has also pointed to potential bias caused by the way in which exposure to accidents is measured (3, 4). Because of the problems associated with traditional accident analyses, some have promoted the use of tqe traffic conflicts technique (5). However, this procedure also has shortcomings in that it.requires extensive field data collection and trained observers to identify the different types of conflicts occurring in the field. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections that would be compatible and consistent with that presently found in the HCM for evaluating efficiency-based level of service as measured by delay per vehicle (6). The intent was not to develop a new set of accident prediction models, but to design a methodology to quantitatively predict the relative hazard of alternative intersection designs and signal timing plans.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.4
• /
• pp.474-485
• /
• 2000

Background : Current studies on multimodal strategy for N2 non-small cell lung cancer are being high interest, have drawn much attention. N2 lung cancer, however, is composed of is divided into several sub groups with that have different prognoses. The prognostic factors still remain controversial. Methods : Between January 1990 and June 1999, 180 patients with N2 lung cancer who underwent surgical resection were investigated, excluding 10 of these for surgical mortality. All patients underwent mediastinal lymph node dissection. 20 clinicopathologic factors were investigated by univariable and multivariable analyses to identify significant prognostic factors among resected N2 disease. Results : The overall 5-year survival rate was 20.6%. Multivariable analyses among overall patients revealed 3 significant prognostic factors : Age, Histologic type, Vascular invasion. Based on the result, 49 patients with both age more than 60 and pathologic Non-squamous cell showed a 5-year survival of 5.0%, whereas 37 patients with neither of the factors showed a 5-year survival of 56.6%(p<0.001). And 12 patients with both vascular invasion and pathologic Non-squamous cell showed a 5-year survival of 11.9%, whereas 67 patients with neither of the factors showed a 5-year survival of 33.6%(p=0.01). Conclusion : The prognosis of surgically resected N2 disease varies according to the 3 significant prognosis factors. Tumor size may be an additional influencing factor in the prognosis of N2 disease.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.89-110
• /
• 1998

Variations of backfill load on the metal-polyethylene composite( MPC ) pipes buried in various trenches backfill afterward were investigated in this paper. The backfill loads obtained by the finite element method( FBM ) were compared with those calculated by the well-known MarstonBpangler(M-5) theory. The reliability of the finite element analysis used in this study was examined by an inaitu best for the buried pipe. The backfill lords and deflections on the real-size pipe buried on-site were measured while increasing the backfill height. In addition, further investigations were made for the variations of the backfill loads as a function of several important parameters such as the backfill soil type, bach. height$(\leq4.0m)$, diameter of the pipe$(B.$1.0m)$, and trench width($\leq 3.0 B_c$). It is confirmed that the M-S theory predicts reasonably well the backfill loafs of the MPC of the M-S backfill coils be 0.13 and 0.15 for the SC and SM coils in the D unman soil model, respectively. The load ratio, Wu-s/WwgM for a narrow trench varies negligibly with the back(111 height but fiends to increase for a wide trench. The ratio increases with increasing diameter of the pipe for a narrow trench while decreasing for a wide trench. It is also found that the ratio generally decreases as the degree of compaction increases and BM soil exhibits larger load ratio than that of SC soil.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.9
• /
• pp.1106-1113
• /
• 2017

The objective of this study was to determine the quality characteristics of fried yakgwa and baked yakgwa prepared with different amounts of P. frutescens powder. Moisture contents of fried yakgwa were 7.05%, and moisture content of baked yakgwa with different amounts of P. frutescens powder were 12.42~10.44% and decreased with higher amount of P. frutescens powder. This result can be attributed to loss of water in yakgwa in the course of the fried process. Although the degree of expansion of baked yakgwa was lower than that of fried yakgwa, size and shape of yakgwa were maintained. Yakgwa is appropriate as a cookie type product. Crude lipid contents of fried yakgwa were higher than those of baked yakgwa due to the exchange reaction of water and fat during the fried process. Energy of fried yakgwa was 501 kcal and was higher than that of baked yakgwa with different amounts of P. frutescens powder. This greatly affected the fat content of each sample. Energy of baked yakgwa increased with higher amount of P. frutescens powder due to the characteristics of the ingredients or jasoyeop. For chromaticity determination, L values of fried yakgwa were lower, but a, and b values were higher than those of baked yakgwa, and L, a, and b values decreased when P. frutescens powder increased. Texture measurement showed that hardness, cohesiveness, chewiness, gumminess increased with higher amounts of P. frutescens powder, whereas springiness decreased. The antioxidant activities of fried yakgwa measured based on DPPH scavenging activity were higher than those of baked yakgwa with 0%~0.2% P. frutescens powder and lower than those of baked yakgwa with 0.3%~0.4% P. frutescens powder. In the sensory evaluation, baked yakgwa with 0.1% addition of P. frutescens powder showed the highest preference in terms of overall acceptance, and 0% addition of P. frutescens powder showed the highest preference in terms of color and flavor. These results suggest that P. frutescens powder may be a useful ingredient in baked yakgwa to improve quality and sensory properties.

• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.233-252
• /
• 1994

One of major advantages of Lumped model is its ability to simulate extended flows. A further advantage is that it requires only conventional, readily available hydrological data (rainfall, evaporation and runoff). These two advantages commend the use of this type of model for the analysis of the hydrological effects of landuse change. Experimental Catchment(K11) of Kimakia site in Kenga experienced three phases of landuse change for sixteen and half years. The Institute of Hydrology offered the hydrological data from the catchment for this research. On basis of Blackie's(l972) 9-parameter model, a new model(R1131) was reorganized in consideration of the following aspects to reflect the hydrological characteristics of the catchment: 1) The evapotranspiration necessary for the landuse hydrology, 2) high permeable soils, 3) small catchment, 4) input option for initial soil moisture deficit, and 5) othel modules for water budget analysis. The new model is constructed as a 11-parameter, 3-storage, 1-input option model. Using a number of initial conditions, the model was optimized to the data of three landuse phases. The model efficiencies were 96.78%, 97.20%, 94.62% and the errors of total flow were -1.78%, -3.36%, -5.32%. The bias of the optimized models were tested by several techniques, The extended flows were simulated in the prediction mode using the optimized model and the data set of the whole series of experimental periods. They are used to analyse the change of daily high and low-flow caused by landuse change. The relative water use ratio of the clearing and seedling phase was 60.21%, but that of the next two phases were 81.23% and 83.78% respectively. The annual peak flows of second and third phase at a 1.5-year return period were decreased by 31.3% and 31.2% compared to that of the first phase. The annual peak flow at a 50-year return period in the second phase was an increase of only 4.8%, and that in the third phase was an increase of 12.9%. The annual minimum flow at a 1.5-year return period was decreased by 34.2% in the second phase, and 34.3% in the third phase. The changes in the annual minimum flows were decreased for the larger return periods; a 20.2% decrease in the second phase and 20.9% decrease in the third phase at a 50-year return period. From the results above, two aspects could be concluded. Firstly, the flow regime in Catchment K11 was changed due to the landuse conversion from the clearing and seedling phade to the intermediate stage of pine plantation. But, The flow regime was little affected after the pine trees reached a certain height. Secondly, the effects of the pine plantation on the daily high- and low-flow were reduced with the increase in flood size and the severity of drought.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1443-1451
• /
• 2008

This study was performed to develop menu satisfaction index in Business & Industry (B&I) food service and to survey customer's menu satisfaction using the index. The menu satisfaction index included 16 items with Likert 5 point. Cronbach's alpha to assess the internal reliability of the developed scales was 0.8917, which indicated highly reliable. Construct validity was assessed by principal components analysis and then four factors explaining 65.964% of the total variance were found. Among the 15 items of menu satisfaction, the average scores of all items were above 3.0 out of 5. As a result of analysis on menu satisfaction factors, 'propriety of food temperature' (3.52 out of 5) was the highest consideration followed by 'sufficiency of format' (3.46), 'excellence in food' (3.35) and 'well-being orientation' (3.31). It could be said that customer's perception on the menu quality was very positive. Four factors were correlated with overall menu satisfaction positively. Especially, 'excellence in food', and 'well-being orientation' and 'sufficiency of format' affected significantly on overall menu satisfaction. It concluded that customers were satisfied with portion size, temperature, price but their needs for taste and health/nutrition-related service would be increased. The menu satisfaction developed in this study should be applied to other B & I food service operation by type.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.105-115
• /
• 2015

This study examined what effect the educational satisfaction level in the grey job project had on the business effectiveness and verified the effect the participant education satisfaction level had on the project business effectiveness ultimately by influencing the job satisfaction. This study utilized the source data of the senior job project old participant status survey of the Korea senior manpower development center which was conducted in 2013, and the non-proportional stratification sample extracting method was used which considered the project type, regional size, and cities/provinces. Sejong City was excluded from the survey target and the survey targeted 2,005 persons except for non-response or response-irrelevant persons concerning this study question. The collected material was analyzed by using SPSS WIN 21.0 program. The frequency and percentage were calculated to apprehend the general characteristic of the study target. Also, the regression analysis was conducted to examine the effect the educational satisfaction level had on the business effectiveness of the senior job project, and the hierarchical regression analysis was conducted in order to examine the mediated effect of the job satisfaction level in the effect the educational satisfaction level had on the business effectiveness of the senior job project. The main result of this study is as follows. First, among the effects the educational satisfaction level had on the business effectiveness, both interest level of educational contents and the job utilization of education had a significant effect on the psychological effect, and the interest level of the educational contents had a significant level on the physical/social effect, and the job utilization of education had a significant effect on the economic effect. Second, in the effect the educational satisfaction level had on the business effectiveness, the job satisfaction level was confirmed the job satisfaction level had a partial mediated effect in the effect the educational satisfaction level had on the psychological/physical/social effect. The job satisfaction level was confirmed the job satisfaction level had a complete mediated effect in the effect the educational satisfaction level had on the economic effect. Also, The job satisfaction level was confirmed the job satisfaction level had a partial mediated effect in the effect the educational satisfaction level had on the business effectiveness. Consequently, the educational contents according with the demand of job participants will have to be developed and the exclusive manpower must be arranged to conduct the education effectively. Also, making participants feel a pride on the job fully will largely contribute to raising the business effectiveness because the job satisfaction level has a positive effect on the business effectiveness.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.113-119
• /
• 2010

This study examined figurative characters of rice terraces, and is intended to seek figurative possibility of a natural scene by selecting Gyeongnam Area Namhae Gacheon rice terraces, Sancheong Imcheon rice terraces and Hamyang Macheon rice terraces through an analysis of the target land. As a theoretical background, studies of a natural scene and figuration-related literature were looked into, and for figuring a natural scene on the basis of the results, the character of the topography of rice terraces was divided into 9 items as follows by generalizing the inspiration obtained from the natural scenic character and spatial character of rice terraces represented from the topography: (1) Inclination showing the degree of the slope of rice terraces, (2) The bending showed by unevenness of the edge line of rice terraces, (3) The degree of parallelism of the up-and-down edge line, (4) The size of the width of the section of each rice terrace, (5) The area of the total rice terraces, (6) Step gap that indicates the difference of high and low of the up-and-down small rice terraces, (7) Figuration as an image represented by the external form of the total rice terraces, (8) Naturalness and artificiality kept by the total scene, (9) Softness of cornerstones or soil that forms small rice terraces, an atmosphere produced by the total scenes, etc. The results of analysis made through GIS, with rice terraces of Gyeongnam Namhae, Sancheong and Hamyang Area as the target land, are as follows. First, the steeper the inclination is, the higher the step difference of cornerstones becomes, and the steeper the inclination, the narrower the area and width become, so that it could be known that, in rice terraces, inclination is proportional to step difference and the area is inversely proportional to the width. Second, it is considered that line showed in rice terraces, area elements and reiteration, repeated changes, and changes in the scene affected by the surrounding environment including those according to season can be converted into a variety of images according to an individual disposition. Third, it was decided that it is possible to figure repetitive composition and directivity, motility, order and change, etc. into a common type drawn from each target land. This paper, as a study of basic materials for expressing figuration in an environment field, investigated and analyzed the surrounding environment of the target land, and is significant in that it attempted the possibility of being able to generalize the environmental beauty of the target land as one figurative element. More precise studies are expected to be made later.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.277-294
• /
• 2001

This study is aimed to analyze and to evaluate the technology development for sanddune fixation and sandy land conservation in China, resulting from the project of "Studies on the desertification combating and sand industry development". There are various types of sanddunes, including shrub-bunch type, dendritic, honey combed lattice, crescentic, parabolic, pyramid, complex and irregular types, domed, and so on. The height distribution ratios of these sanddunes are 13% of less than 5m, 17% of 6~10m, 18% of 11~25m, 14% of 26~50m, 28% of 51~100m, 10% of more than 100m, and so on. In dry land of China, shifting direction of the sanddune is mainly varying with main direction of wind, but types of shifting sanddunes have many differences in accordance with region, topography, size and shape of sanddunes. The main sanddune fixation technologies could be divided into the bio-ecological measures, physical measures and chemical measures. The bio-ecological measures include such vegetation measures as shrub-grasses measures, sandbreaks between sand dunes, sand fixation shelterblets and establishment of farmland shelterbelts, etc. The physical measures include establishment of high-sanddune stabilization walls and low-sanddune stabilization walls, sanddune fixation levees and coverage method with sediment clay, etc. The chemical measures include fixation-materials spraying and synthetical liquid spraying methods, etc. Besides, irrigation and sand settlement measures, shifting sand trapping channel, ditchsand fixation measures, etc. have been effectively applied.