• Journal of Environmental Science International
• /
• v.18 no.7
• /
• pp.709-714
• /
• 2009

Catalytic activities of $V_2O_5/TiO_2$ catalyst were investigated under reaction conditions such as reaction temperature, catalyst size, inlet concentration and space velocity. A 1,2-dichlorobenzene(1,2-DCB) concentrations were measured in front and after of the heated $V_2O_5/TiO_2$ catalyst bed, and conversion efficiency of 1,2-DCB was determined from it's concentration difference. The conversion of 1,2-DCB using a pellet type catalyst in the bench-scale reactor was lower than that with the powder type used in the micro flow-scale reactor. However, when the pellet size was halved, the conversion was similar to that with the powder type catalyst. The highest conversion was shown with an inlet concentration of 100 ppmv, but when the concentration was higher or lower than 100 ppmv, the conversion was found to decrease. Complete conversion was obtained when the GHSV was maintained at below 10,000 $h^{-1}$, even at the relatively low temperature of $250^{\circ}C$. Water vapor inhibited the conversion of 1,2-DCB, which was suspected to be due to the competitive adsorption between the reactant and water for active sites.

• Journal of Fashion Business
• /
• v.9 no.3
• /
• pp.88-98
• /
• 2005

This study focuses on the needs at both consumers and manufacturers. It aims to find ways for consumers to purchase outfits that would fit their particular body type and preferences at reasonable prices, choose raw materials and style at garments, and virtually try them on. In addition, the study is designed to help apparel manufacturers identity customers' changing needs, reduce inventories, manage information on customers' body type in a digitalized form, and eventually contribute to promoting electronic commerce. Based on nine basic patterns that tit each subject, 108 virtual garments are created by adjusting the size of the patterns (9 subjects $\times$ 4 body parts $\times$ 3 patterns = 108 outfits). In order to determine fitting preferences for each body part and find optimized conditions, cross-tabulation analysis including $X^2$ and frequency analysis were performed to measure the appearance rate. A style of virtual garment, which is minus 2cm from chest size was chosen as the most appropriate pattern to the baseline location of front the chest. For the waist parts, the C style as an appropriate virtual garment to front and back view. In the front, lateral and back view, a style was chosen in the response to the sleeve-bodice combinations, the ease amount of armhole area, the armhole depth and the loosening of tightening or armhole line.

• Journal of Chest Surgery
• /
• v.24 no.5
• /
• pp.445-450
• /
• 1991

Forty eight patients diagnosed as atrial septal defect, had been operated from April 1986 to December 1990 at the Department of Thoracic and Cardiovascular Surgery, Inha University Hospital, were analysed retrospectively. Of the 48 patients, 12 patients, were male and 36 patients were female, Their ranged from 8 months to 51 years old, and the mean was 18.0 years old. The proceeding two symptoms were exertional dyspnea and frequent upper respiratory infection. But 10 patients [20.8%] were asymptomatic. Electrocardiographic findings were regular sinus rhythm in 100.0%, RVH in 29.2%, incomplete RBBB in 27.1%, and first degree AV block in 2.1%. Hemodynamic studies were performed in 38 of 48 patients. Significant pulmonary hypertension[over 50mmHg in systolic pulmonary arterial pressure], which is the most serious risk factor, was developed in 4 patients[8.3%]. There was statistical significance between size of defect[cm2/BSA-M2] and systolic pulmonary arterial pressure[sPAP] retrospectively[p=0.036]. We could not find the correlationship between age and Qs % size. Anatomically, secundum type constituted 97.9%, in which 43 patients were PFO type[91.6%] and 3 patients were IVC type[6.3%]. 38 of 48 ASD patients were repaired with patch closure[72.9%] and remains were repaired with direct closure[27.1%]. The operative result was excellent except two cases of transient postoperative arrhythmia. There was no operative mortality.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.8 no.1
• /
• pp.69-74
• /
• 1997

The authors compared 20 cases of preoperative and postoperative results in patients with hypernasality who were treated at Yongdong Severance hospital from January 1994 to August 1996. According to the severity of the hypernasality, types of operations such as superior based pharyngeal flap surgery or posterior pharyngeal wall augmentation was selected. The preoperative and postoperative results wert analyzed by 2 otorhinolaryngologists and 1 speech therapist through an endoscopic examination and voice evaluation. follow up period was 1 month to 17 months and mean was 5.6 months. Types of the velopharyngeal closure according to the mobility of soft palate and pharyngeal wall could be divided into 3 types : coronal type(2 cases), sagittal type(4 cases), and circular types(14 cases), The results indicated that sagittal type showed the best result. In surgical treatment for hypernasality, the mobility of the pharyngeal lateral wall and making suitable size of lateral per during surgery were the most important factors affecting the patient's satisfaction.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.501-506
• /
• 2010

Natural chitosan has high molecular weight and the poor solubility in water. Water-soluble chitosan with low molecular weight was prepared by the hydrolysis method. In order to develop an efficient gene delivery carrier, chitosan was conjugated with lipoic acid to form the comb-type copolymer. The copolymer with the amphiphilic property formed the self-assembled nanoparticles in the aqueous solution. The average size of nanoparticles was 217.6 nm and the average size of nanoparticles/DNA complex was 170 nm. New chitosan-lipoic acid copolymer showed the low cytotoxicity and 10 times higher transfection efficiency than that of the pure chitosan.

• Korean Journal of Human Ecology
• /
• v.23 no.5
• /
• pp.873-890
• /
• 2014

The purpose of this study was to examine the relationship among consumer's perceived risk of apparel purchase in internet shopping mall, control, and impulse buying. The subjects were 319 female college students in Gyeongsang provinces. The obtained data were analyzed by reliability analysis, analysis of frequency, factor analysis, cluster analysis, one-way ANOVA, Duncan's multiple range test, correlation analysis, and t-test. The major results of this study were as follows: First, three factors of consumer's perceived risk of apparel purchase in internet shopping mall were identified: size risk, trust risk, and social/psychological risk. Second, the subjects were categorized into three different types of groups according to perceived risk: high perceived risk type, middle perceived risk type, and low perceived risk type. Third, three control(self-control, goal-control, and desire for control) and three impulse buying(impulsive buying for showing off, impulsive buying for excitement, and impulsive buying due to memory) were identified. Fourth, there was significant difference between strong control group and weak control group on three factors of impulse buying. Fifth, a significant positive correlation was found size risk and three factors of control and a significant negative correlation was found self-control and three factors of impulse buying.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.95-103
• /
• 2016

PURPOSES : Permitted left turn is a turning maneuver in which a vehicle turns left using a gap between oncoming vehicles, called gap acceptance, and it enables for more efficient traffic operation at intersections. In Korea, the permitted left turn has not been a common maneuver at signalized or un-signalized intersections. However, many experts and the Police Agency tried to apply this effective turning maneuver at intersections in Korea since 2010. Though the investigation of gap acceptance is significantly important in understanding a driver's behavior at intersections, there have not been many studies about this topic, specifically a study to develop probability models of gap acceptance behavior. METHODS : In this study, the probability model of gap acceptance behavior for a permitted left turn was developed based on observational field studies. To develop the model, seven variables were analyzed including gap, waiting time, traffic volume, conflict-flow vehicle type, left-turning vehicle type, the number of lane, and time. RESULTS : In the final model, gap and left-turning vehicle type were found to be significant influencing factors. CONCLUSIONS : Through this model development, it was concluded that as the gap size increased, the probability of gap acceptance was higher. Moreover, when a left-turning vehicle was a passenger car, the probability of gap acceptance was higher than compared to large size buses or freight cars.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.137-142
• /
• 2005

Gas-Assisted Injection Molding(GAIM) is an innovative technology for producing plastic parts and has been received extensive attention in the plastic manufacturing industries. But, due to gas-polymer interacting during the gas injection phase, the process has significantly different characteristics from conventional injection molding and, therefore, the control of the process requires much technical knowledge in processing and materials. The experiment was performed about variations of gas-penetration length that is affected by filling imbalance resulting from the structure of runner. The Taguchi method was used for the design of experiment. The most effective factors for the gas-penetration length were the shot size and mold temperature. The most effective factors for the difference of the gas-penetration length were the melt temperature and shot size. This study also discussed the filling imbalance phenomenon in a unary branch runner type mold that has geometrically balanced runner.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.58-62
• /
• 1999

We fabricated a new hairpin type HTS 2-pole microstrip Bandpass filter to operate at 5.8GHz. The fabrication method was pulsed laser deposition and YBCO films were deposited on ${\alpha}$-A1$_2O_3$ substrates with a CeO$_2$ thin layer as a buffer layer. We developed a new style hairpin type filter by using interdigitide innerpole. Compared to the saute size regular hairpin type filters, our filter had a lower center frequency, bandwidth and loss by an amount of 14.5%, 29.6%, 0.5488dB, respectively. The size of the filters were 13.7${\times}$3.3mm. We did simulations on the several types of band pass filters by using HFSS and serenade. We measured growth rate and Tc of YBCO films grown on CeO$_2$/ ${\alpha}$-A1$_2O_3$ substrates which were rotated while growing films.

• Journal of Magnetics
• /
• v.19 no.4
• /
• pp.340-344
• /
• 2014

An effective process was employed for synthesizing anisotropic magnetic $SmCo_7$-type alloy flakes with high coercivity, which is highly desirable for many applications. The highest coercivity of 16.3 kOe corresponds to a typical flake thickness of 200 nm for the 3-h ball-milled sample. The anisotropy field was calculated by measuring the parallel and perpendicular directions to the easy magnetization direction of the powders. The anisotropy field decreased with the increase of the ball milling time, thus indicating that the decrease of coercivity was mainly caused by the reduction of the anisotropy field. Microstructure analysis indicated that the morphology, grain size, and anisotropy field of these samples have a great influence on the magnetic properties.