• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.255-267
• /
• 2004

This study was conducted in order to improvement of fishing gear and fishing operating system for anchovy boat seine by bag net A-type and B-type was attached with half size modified nets. Field experiments were carried out observe geometry of nets by catcher boats. The obtained results are summarized as follows : The actual ratio of net opening in each part of the half size modified nets was increased from fore part to back part of the nets as shown the smallest value about 20% in wing net and the biggest value about 110% in bag net. In addition, vertical net opening of B-type net as measured as 10.9~11.8m in fore bag net and 5.8~8.0m in after bag net were 1~2m greater than 9.0~13.6m of A-type one, and 2~3m less than 9.3~10.4m of A-type one, respectively. Vertical net opening of half size modified net was shown as less variation of towing depth from wing net to inside wing net than those of traditional nets due to stable vertical performance. The mesh distortion or drift and variation of vertical net opening were decreased by improvement of bag nets in order to minimized shape of net pocket phenomenon whenever towing speed is slow. Bag net B-Type attached with dual flapper was shown as less variation in width of bag net and less escapement of anchovy.

• Journal of the Korean Home Economics Association
• /
• v.37 no.2
• /
• pp.127-144
• /
• 1999

The purposes of this study were to identify the housing maintenance cost, imputed rent fee and total housing cost of households living in rental house, to analyze the factors related to their housing maintenance cost, imputed rent fee and total housing cost and to investigate the factors contributing to total housing cost to total household income ratio. The data used for these purposes, was 97 KHPS of Daewoo Economic Research Institute. Sample size of households living in rental house, was 663. Statistics performed for the analysis were frequencies, percentiles, t-test, Lorenz cutie and Gini coefficient, Tobit analysis, OLS and Logistic analysis. The results of this study were as fellows: First, monthly cost of monthly rent & maintenance and repairs of households living in rental house with a deposit was lower than rental house, while the imputed rent fee of households living rental house with a deposit was higher than monthly rent households'And, total housing cost of households living in rental house with a deposit was higher than monthly rent households'. Second, Gini coefficient of the housing maintenance cost was 0.440, Gini coefficient of imputed rent fee was 0.362, and Gini coefficient of total housing cost was 0.291. Third, the variables related to their housing maintenance cost were family type, total household expenditure of socio-demographic characteristics and residence, type of rent, housing type of housing environmental factor. Also, the variables contributing to imputed rent fee were job type and educational attainment of household hearts, the number of family members, total household expenditure, residence, type of rent, housing type and tole number of rooms. In addition, the variables associated with total housing cost were job type and educational attainment of household head, total household income and residence, type of rent, housing type and the number of room. Finally, age, job type, educational attainment of household head, wife's employment status, the number of family members, family type, total household expenditure, residence, rent type of rent, housing type, the size of living space, and the number of room were significant variables contributing to total household cost to total household income ratio.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.305-320
• /
• 2014

This study identifies the foot shapes of elderly women by classifying foot type according to the 3D shape of the foot and 2D sole type analyzing individual characteristics. The subjects were 295 elderly women over 60 years of age who live in Gwangju. A foot scanner (K&I Technology $Nexcan^{(R)}$) was used to obtain three-dimensional shapes of feet and a flat bad scanner (HP Scanjet G2410) was used to obtain the two-dimensional shapes of soles. The anthropometric measuring items consisted of 59 items estimated on the right foot of each subject. Data were analyzed by various statistical methods such as factor analysis, ANOVA and cluster analysis using the SPSS 19.0 statistical program. To classify the side type of elderly women's feet, three-dimensional measurement data were analyzed for the 27 measurement items using factor analysis and 6 factors were extracted (inside height and side gradient, ankle thickness, toe height and midfoot size, lateral malleolus height, instep, and heel height and gradient). A cluster analysis resulted in three types: 36.5% belonged to Type 1 (high forefoot and high midfoot), 31.1% belonged to Type 2 (high forefoot and low midfoot), and 32.4% belonged to Type 3 (low forefoot and high midfoot). The distribution was relatively even. For the sole, 8 factors were extracted (ball width and medial foot protrusion, lateral foot protrusion, forefoot and hindfoot length ratio, ball gradient, heel size, toe breadth, lateral ball length, and foot length) and a cluster analysis resulted in three Types (Type H, Type D, and Type A). The largest proportion (42.7%) belonged to Type H, which is the same as the elderly men's case.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.201-217
• /
• 2014

There is likely to be a fit problem when women aged in their 30s-40s purchase down-age clothing from brands that target women in their 20s. To identify the part of the lower body that causes the fit problem, the sizes and types of lower body of women in their 30s-40s were compared with those of women in their 20s. The data for this study was from the 2010 Size Korea survey of body measurements of 1675 female adults in their 20s-40s. To examine differences in the average sizes of the lower body between women in their 20s and 30s-40s, descriptive statistics and t-tests were conducted. Factor and cluster analysis were used to classify body types by age groups. On the whole, compared to women in their 30s-40s, women in their 20s were found to be higher for all height items and smaller for size, thickness and width items. The result of the Glycemic index analysis showed that the body type of women in their 20s was generally larger than that of women in their 30s-40s. In addition, women in their 20s had a large drop value compared to those in their 30s-40s, whereas flatness of body cross section was bigger in the group of women in their 30s-40s. Four factors related to the lower body type of female adults in their 20s-40s were identified in the factor analysis, and three categories of body type were identified by cluster analysis. A Type 1 individual had abdominal obesity and chubby lower limbs, Type 2 had short legs and slightly chubby lower limbs, and Type 3 had long legs and a skinny lower body. A significant number of women in their 30s-40s were included in the Type 1 group, which was the least common category for women in their 20s.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.119-126
• /
• 2017

This study examined the soundness, vibration, and size of ambulances currently used in Korea as well as the comfort and convenience of ambulancesin Korea. The target vehicles were measured and investigated using the currently used freight type, van type, and Benz ambulance. Currently, the ambulance standards in Korea have only formal production standards, and there is no regulation on safety for ambulances, space regulation for first aid, comfort, and convenience. Therefore, comparative experiments on the comfort and convenience were measured using noise and vibration measurement experiments, and research was conducted on the size and interior rearrangement of ambulances to investigate the areas that can improve the comfort and convenience. The noise measurementsshowed that the noise was large in the order of the van type, Benz type, and freight type. In the case of a speed of 40 km/h or more, the noise measurement result was 60 to 70 dB or more. In the case of vibration, the Benz type and van type ambulance were good, and the vibration of the freight type showed the worst result, highlighting the need for improvement. Lastly, it is not possible to increase the internal size of the structure of domestic ambulance. On the other hand, it is important that through ambulance relocation and the position of first aid personnel, it will be possible to use it more comfortably and conveniently.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.113-122
• /
• 2000

The reinforced composte resin as the esthetic operative material continuously has been studied because the porcelain fused metal prosthesis is widely used for its excellent esthetics, rigidity and marginal integrity, but it has low fracture resistance against the tensile strength and stress, attrition of the opposite teeth. The reinforced composite resin is well adapt with the dental alloy but it is low the shear bond strength with the dental alloy vs the porcelain fused metal prosthesis, and then has been studied continuously. The purpose of the study was to examine how metal was the higher shear bond strength among the dental alloy was used to the reinforced composite resin and to find the effect that the particle size of sandblasting influenced the shear bond strength. We built up the reinforced composite resin with 4 mm in diameter, 3 mm in height on circular alloy with 5 mm in diameter, 2 mm in height. Type II gold, type IV gold, and Ag-Pd alloy was used as alloys and $50{\mu}m$, $110{\mu}m$, $250{\mu}m$ of the particle size was sandblasted at each alloy in bonding between alloy and resin. We made 90 secimens of 10 per each group and we measured the shear bond strength using the Instron($M100EC^{(R)}$, Mecmesin Co., England). The obtained results were as follows : 1. In comparison among each alloys, Ag-Pd alloy had the highest shear bond strength and the shear bond strength was decreased significantly in the sequence of the type II gold and type IV gold(P<0.001). 2. In comparison according to the size of sandblasting particle, (1) In Ag-Pd alloy, shear bond strength was decreased in the sequence of $110{\mu}m$, $250{\mu}m$, $50{\mu}m$ and there were significant difference in all the group. (P<0.05) (2) In type II gold, it was decreased in the sequence of $250{\mu}m$, $50{\mu}m$, $110{\mu}m$ and there were significant difference. (P<0.05) (3) In type IV gold, it was decreased in the sequence of $110{\mu}m$, $50{\mu}m$, $250{\mu}m$. There were significant difference between the group of $110{\mu}m$ and $50{\mu}m$, the group of $110{\mu}m$ and 250, but there were no significant difference in the group of $50{\mu}m$ and $250{\mu}m$. 3. The highest shear bond strength according to the size of sandblasting particle was $110{\mu}m$ in Ag-Pd alloy and type IV gold, $250{\mu}m$ in type II gold.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.63-68
• /
• 2000

This paper describes the conceptual design of new robot hand by type synthesis. The conventional robot hands with rotational movement have bad controllability because the distance between the final rotational joint and the center of things grasped is changed according to the size of things grasped. This paper uses the systematic procedure of type synthesis and the knowledge for designing robot hands. The new 6-bar Watt I type conceptual robot hand with rectilinear translational movement is proposed.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.17-29
• /
• 2023

This study collected and analyzed reference information on the size labeling method and size of clothing products in 13 online shopping malls for plus size women in their 20s and 30s, and compared the size specification information focusing on jeans. First, in the results of examining the method of clothing size designation, clothing sizes indicated by 1, 2, 3 or physique designation (M, L, XL) differed between shopping malls, and even in the same shopping mall, even if the same size notation was used. Most the clothing sizes were different depending on the type of clothing. For bottoms, it was found that one company used seven size designation methods at the same time, two shopping malls used four size designation methods, and five shopping malls used three size designation methods. In the meantime, in the results of comparing the size specifications of jeans XL (size 88, 32 inches) by product part, for waist and hip circumferences, each of the eight companies showed that the size was smaller than the body size suggested by KS adult women's wear.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.155-172
• /
• 2015

This study analyzed the change pattern of Korean male body size in their 40s-60s and their current body shape based on the research materials of the 5th(2004) and 6th(2010) conducted by Size Korea. The purposes of this study are to make the related fashion industry recognize the changes of Korean male body size in their 40s-60s and suggest basic materials for clothing design that reflects such trend. As a result of analyzing changes of male body size in their 40s-60s by age, it was found that height, length, breadth and weight decreased across most of the items as the age increased. As for circumference, as the age increased, waist circumference (natural indentation), waist circumference (omphalion), and abdominal extension circumference increased, while other items decreased. In relation to the depth, as the age increased, hip depth and armscye depth decreased, while chest depth, bust depth, waist depth (natural indentation), and waist depth (omphalion) increased. Analyzing the change pattern of Korean male body size in their 40s-60s according to measurement year, height size increased in the 6th year across most of the body part items compared to the 5th year. It means that height of body parts related to body height increased in overall. As for circumference, most items showed decrease, which means that Korean male's body shape in their 40s-60s gets slim gradually. While the breadth of the chest decreased, the depth of the chest increased. which is assumed due to the increase in exercise according to high interest in health in a society. It will be possible to design proper clothes for consumer body type and trends if we design clothes that afford multilateral attention to the patterns, design, or material in clothing design by applying the aspects of Korean male body size in their 40s-60s and body type change.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.3
• /
• pp.15-26
• /
• 2018

The purpose of this study is to understand the characteristics of body types of adult woman under 155cm in height. To do this, direct measurement data showed that only 660 women aged 20~69 years old and under 155cm tall were classified, and their body type characteristics were analyzed. There are 51 body measurement items used in the analysis. The results of the study are as follows: As a result of the comparison of the body size of all adult women and women under 155cm, it was seen that short women were smaller than the all women, and were flattened with a slightly plump and bendless body. Factor analysis was performed to classify the body type of short women. Six factors including body size, body height, shoulder length and width, waist back length, hip length, and shoulder angle were measured. The results of cluster analysis, using factor scores, were classified into three types. Type 1 is taller among short women and slightly slimmer, and is an A-shape. Type 2 has the largest BMI and was the middle stature among short women It is the most obese body type and is an H-shape. Type 3 is short and plump, with a poor hip and is a Y-shape. As a result of crossover analysis, there was a difference in the body type characteristics of each age group. After all, the body type of the short adult women under 155cm was clearly different from those of all adult women, there was also a difference in the body type among short adult women.