• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.84-89
• /
• 1997

Recentely, a compact and small size air-cleaning Electrostatic Precipitator(ESP) is needed to develop for air conditioning devices. From Deutsch formula for ESP efficiency, collection efficiency is affected not only the structure of collection section but also the charge rate of dust. In terms of collection area, the most useful type is a scroll type ESP. In this work, we investigated experimentally aptimum design factor of scroll type ESP by application of Taguchi method. And we developed the scroll type ESP by using optimal condition of control factor.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.7
• /
• pp.10-18
• /
• 1992

In this paper, a simulation model for scope and filter parameters in CMIS/CMIP, OSI management protocol, has been discussed and the suitable scope type was represented by analyzing optimal polling time in network management system, queue size and response time. Scope and filter parameters in MGet, M-Set, M-Action, and =M-Delete services provide a scheme to select some managed objects, and the results are largely varied according to a scope type requested and the outcome of filtering. It has been simulated each scope type and all scope type mixed in a network by varying the offered load and a polling time. On the same time, the response time, queue size of the managing system and a delay time have been measured. As a results, the suitable scope type and polling time enhancing the network performance on the OSI network management is proposed.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.929-931
• /
• 2004

Recently, there are growing demands for permanent magnet(PM) type stepping motor that greater mechanical output, smaller size. Especially, the PM type stepping motor with claw-poles is preferred solution for many small electronics position determination devices since it is small in size, low cost. But, the design of the PM type stepping motor with claw-poles is very difficult because it has a magnetic 3-D shape. This paper deals with a study of the miniaturization of the PM type stepping motor with claw-poles. We investigate the characteristic of the actual model using the equivalent magnetic circuit method and 3-D FE analysis.

• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.717-725
• /
• 2002

A bench-scale submerged-type membrane filtration system (SMFS) was constructed to study a feasibility of membrane filtration for solid-liquid separation in water and wastewater treatment processes. In the case of applying the SMFS to a biological wastewater treatment process, so-called membrane bioreactor, aeration underneath membrane modules is usually employed in order to provide oxygen demand for microbial growth as well as to control membrane fouling. A study was investigated the effects of operation parameters by aeration intensity, feed concentration, foulant type and airlift pore size on critical flux. Critical flux tends to increase with aeration rate. Optimal aeration flow rate was found to be 10 L/min/module. Feed concentration and foulant type has a significant effect on membrane fouling and filtration performance. But downward position and pore size of airlift has no a significant effects on membrane fouling and filtration performance.

• Journal of Digestive Cancer Research
• /
• v.3 no.1
• /
• pp.21-25
• /
• 2015

Gastric neuroendocrine tumors (GNETs, also known as gastric carcinoids) are rare form of hormone-secreting neoplasms that present with varied clinical syndromes. There are four types of GNETs based on size, proliferation, localization, differentiation, and hormone production. Type I GNET is related to autoimmune atrophic gastritis and hypergastrinemia. Type II GNETs are related to multiple endocrine neoplasia (MEN)-1, Zollinger-Ellison syndrome and hypergastrinemia. Type 3 GNETs are not associated with any background pathology, and type 4 GNETs are poorly differentiated tumors. The most useful diagnostic and prognostic marker for gastrointestinal NETs is plasma chromogranin A (CgA) levels. Endoscopic ultrasound is the method of choice to determine tumor size and depth of infiltration. For optimal management, the type, biology, and stage of the tumor must be considered. Here, we provide a comprehensive and up-to-date review of GNETs.

• Health Policy and Management
• /
• v.14 no.2
• /
• pp.1-16
• /
• 2004

The study purpose was to find which factors affect selection of hospital network types. This study used the 1998 American Hospital Association Annual Survey Database from Health Forum. Among these U.S. hospitals, the researcher selected hospitals located in Metropolitan Statistical Areas. Therefore the final observation cases for analysis are 1,971 Metropolitan Statistical Area hospitals in the United States. To identify significant variables influencing hospital network types, the study used proportional odds logistics regression model on population size, Health Maintenance Organization penetration rate, and market competition rate of area including a hospital, types of hospital ownership, hospital bed size, proportion of Medicare patients and Medicaid patients in total hospital patients, and occupancy rate. Contrary to conventional wisdom, selection of hospital network types was influenced by population size of area which a hospital located, types of ownership, hospital bed size, and proportion of medicare patients rather than Health Maintenance Organization penetration. Population size 1,000,000-2,499,999 had the highest probability of selecting type IV (clinical-vertical integration) from an independent hospital, and a religious group owned hospitals and for-profit owned hospitals had the highest probability of selecting Type IV (clinical-vertical integration) from an independent hospital. A bed size had positive relation on selecting Type IV (clinical-vertical integration) from an independent hospital. Unlikely general belief that the selecting types of hospital network was determined by the change of health insurance policy such as Health Maintenance Organizations and Preferred Provider Organizations, the types of hospital network were influenced by community characteristics such as population size, and hospital characteristics.

• Journal of the Korean Society of Costume
• /
• v.54 no.2
• /
• pp.149-165
• /
• 2004

In this study, the photographic and anthropometric measurements of men in the 20's were made. and pattern making professionals visually evaluated their side photos to classify lateral views. These data were analyzed by being compared with existing research results to select objective standards, and body types were classified according to the selected standard. In addition, body features were defined according to lateral views based on measurement items and indices, and standard lines and determining factors for visual evaluation which determines lateral views were revealed. Back length - front length size smaller than 1.5cm was named as the lean-back type, 1.5∼3.9cm was named as the straight type. and that larger than 3.9cm was named as the bend-forward type. In the straight type, the bisection point of waist depth was located at a similar place to tragion level vertical line. In the lean-back type, the point was at the front of tragion level vertical line. In the bend-forward type, the point was at the back of tragion level vertical line.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.4
• /
• pp.47-65
• /
• 2019

A case study was conducted in Taean region to seek a more detailed macrotidal beach classification than existing beach classification models (Masselink and Short, 1993). Seepage and ridge & runnel were used for classification. On 20 beaches, 68 transects were surveyed 5 times using VRS-GPS. Cross-section area from the transect profiles, mean grain size from sediment analysis, significant wave height from Swan-wave modeling and beach embaymentization from aerial photograph analysis were used to identify the characteristics of the individual types. The transects were classified into 5 types in Taean region; Type 1: low tidal terrace, Type 2: low tidal terrace & ridge, Type 3: dissipative, Type 4: seasonal ridge, and Type 5: ridge & runnel. Generally, seepage was related to coarse sediment size and ridge & runnel was related to high significant wave height. Each type has different characteristics and there was a tendency between the types. The low tidal terrace type had coarse sediments, because this type is excluded from the littoral cell. In this study, the ridge and runnel type could be applied to the classification because the study area is limited only to the macrotidal environment in Taean region.

• Composites Research
• /
• v.18 no.5
• /
• pp.21-26
• /
• 2005

The validity of Eshelby-type model with Mori-Tanaka's mean field theory to predict the effective material properties of composites have been investigated in terms of filler size and its arrangement. The 2-dimensional plate composites including constant volume fraction of fillers are used as the model composite for the analytical studies, where the filler size and its arrangement are considered as parameters. The exact effective material properties of the composites are computed by finite element analysis(FEA), which are compared with effective material properties from the Eshelby-type model. Although the fillers are periodically or randomly arranged, the average Young's moduli by Eshelby-type model and FEA are in good agreement, specially for the ratio of specimen size to filler size being smaller than 0.03. However, Poisson's ratio of the composite by the Eshelby-type model is overestimated by $20\%$.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.