• Journal of the Korean Wood Science and Technology
• /
• 제49권2호
• /
• pp.181-190
• /
• 2021

Screw-type fasteners are widely used to make connections between wood members or between wood and steel connectors because they can tolerate the applied loads by withdrawal or shearing. In this study, we evaluated the withdrawal resistances of the screw-type fasteners and analyzed the effects of the lead-hole size, relative grain direction (tangential, radial, and cross-sections) of the wood member, screw diameter, screw type, and species. Two wood species, including domestic larch and imported spruce, and three screw-type fasteners, including domestic lag screws (diameters of 9.46, 7.79, and 6.27 mm), domestic tapping screw (diameter, 6.3 mm), and imported Sherpa screw (diameter, 8.0 mm) were used. To assess the effect of lead-hole size, the lead holes with diameters corresponding to 68.7%, 70.8%, and 74.0% of the shank diameter of the lag screw were predrilled. The lead hole corresponding to 74% of the shank diameter was selected for this study because the smaller lead holes required higher rotational force for installation, which may cause damage in the screw neck, although there was no significant difference in the withdrawal resistance depending on the lead-hole sizes applied in this study. The lag screws installed on the tangential and radial surfaces showed similar withdrawal resistances to each other, which were greater than those installed on the cross-sectional surface. As the lag screw diameter increased from 6.27 mm to 9.46 mm, the withdrawal resistance also increased proportionally. The withdrawal resistance of the tapping screw having a diameter of 6.3 mm was almost 1.6 times higher than that of the lag screw having a similar diameter of 6.27 mm, while that of Sherpa screw having a diameter of 8.0 mm was around 1.4 times higher than that of the lag screw having a similar diameter of 7.79 mm.

• 한국의상디자인학회지
• /
• 제24권2호
• /
• pp.73-84
• /
• 2022

Based on the method of marking the size of children's wear suggested by Korean Agency for Technology and Standards, this study classified the heights of school-aged girls by 10cm. The purpose of this study is to provide foundational material by analyzing and comparing the characteristics of torso types. The author analyzed the height section of 130 to 139.9cm, which the majority of subjects fell into, and concerning the method of research, this study statistically analyzed body sizes and calculated items related to 162 persons' torso types out of the 6th Korean Body Size Data. According to the results, eight factors were extracted, and the total explanatory variate of all the factors was found to be 81.93%. According to the results of cluster analysis with it as an independent variable, three types were drawn. Type 1 (41.4%) was found to be the thickest in the torso and round and severely curved in the sectional form of the circumference item. RegardingType 2 (25.9%), the horizontal size of the torso is similar to that of Type 1: the upper body is long, and the sectional form of the circumference item is oval-shaped. Regarding Type 3 (32.7%), mean values are similar to those of Type 2 overall: the upper body is short, and the body is the most upright. In conclusion, according to the results of analyzing torso types, the types and average values indicate significant differences in the height section of 130~139.9cm. This implies that when making ready-made clothes, it is necessary to come up with the sizes of more detailed items in relation with height. It is expected that the findings of this study will be utilized as basic data when children's wear companies develop prototypes and use grading variances according to the variations of size.

• Elastomers and Composites
• /
• 제58권4호
• /
• pp.179-190
• /
• 2023

The effect of the particle size and silica structure on the wear behavior of Silica/Styrene-Butadiene Rubber (SBR) compounds was investigated using a blade-type abrader and the findings were compared with those obtained with an Akron abrader. The compensated characteristic parameter (Ψ_c), which was the contributory factor of the combined effect of the particle size and filler structure, was introduced. This parameter was found to exhibit a linear relationship with the Young's modulus. The Young's modulus correlated more with Ψ_c than the uncompensated characteristic parameter (Ψ) modeled for carbon black. The wear rate and volume loss measured using a blade-type abrader and Akron abrader were respectively observed to be inversely proportional to Ψ_c, that is, the wear resistance of Silica/SBR compound improved as the particle size became smaller and the silica structure became intricate. The coefficient of determination (R²) obtained from the linear relationship between Ψ_c and wear rate was higher than those between Ψ_c and volume loss for the Silica/SBR compound. Thus, the blade-type abrader exhibited high potential to be used for accurately evaluating the effect of particle size and structural properties of silica on the wear behavior of SBR compounds.

• 복식
• /
• 제56권5호
• /
• pp.13-28
• /
• 2006

The object of this study lies on classifying the size, which is mostly favored in Korea where the wedding dress is usually regarded as an article for rent, and on suggesting the range of sleeve design and that of neck line of bodice. For that, I extracted the average size by analyzing and researching the standard size of actual bodice from real wedding dress manufacturing company. According to the result of the research I named the standard size of Korean wedding dress for rent as 'WM' which has the girth of 88cm and the waist measure of 69cm. Based on the size 'WM', I also named the size 'WS' which has the girth of 82cm with extra length of 6cm up and down and the waist measure of 64cm with extra length of 5cm, and the size 'WL' which has the girth of 94cm and the waist measure of 74cm with same extra length as the size 'WS'. The extra space for the inseam of the back is 3 inches for left and right for all sizes and the mark of body size is standardized as 'girth-waist measure'. After that, I suggested the design types of sleeves and neck line of bodice which defined as its size by classifying the bodice of wedding dress based on its size. Generally the neck line of the tank top style has the widest range of wearable size, and the high neck line and bateau neck line types have the narrowest range. And the sleeveless type has the widest range of wearable size while the raglan type has the narrowest one.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1529-1538
• /
• 1995

In this study, a liquid sheet type co-axial nozzle has been used to investigate the turbulent atomization characteristics which could result in the experimental data to be used in designing a jet nozzle with high performance. Image processing technique and immersion sampling method were employed to measure droplet size. In atomizing characteristics, droplet size distributions and absolute droplet sizes, SMD(Sauter Mean Diameter) have been investigated in the wide ranges of flow field depending upon the air-water mass ratios. And the comparisons between the present data and the semi-empirical curves have been conducted semi-empirical correlation for SMD has been derived in the present analysis.

• 한국주거학회논문집
• /
• 제6권1호
• /
• pp.39-50
• /
• 1995

The Plan for effective usage of living room must be suggested because families primarily use living room for public space. And from the viewpoint of function and decoration. the kind of furniture. furniture occupancy quantity. and the arrangement of furniture have much affect on using a dwelling space. So this study will suggest basic data for a good furniture usage through experiment using scale down models. To analyze the data. frequency and percentage were used by running SPSS $PC^＋$ program. The major results are as follows. In an experiment using living room and furniture models(Scale 1/20). according to the size of space. TV sizes and furniture occupancy quantity were in proportion to size and space of the living room. Also they chose various types of tea-table and side-tables. In small spaces. subjects chose simple arrangement types (no sofa or I type sofa and cabinet). but in large spaces. they chose \ulcorner type or \ulcorner type sofa and cabinet.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.37-44
• /
• 1999

In a screw-type centrifugal pump, the pump head deteriorates from single-phase flow to the choke due to an increased air entrainment at a wide tip clearance compared to that of a narrow tip clearance. Moreover, at a narrow tip clearance, the pump head became partially higher in a two-phase flow than that of a single-phase flow near the best efficiency point in low void fraction region. Therefore, we observed the internal flow pattern by using a stroboscope and we measured the mean size of bubbles from the images obtained with a high speed camera. Then, we investigated the influences of the mean size of bubbles, tip clearances and flow patterns on pump performance.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.245-248
• /
• 2005

In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.

• 한국실내디자인학회논문집
• /
• 제22호
• /
• pp.3-15
• /
• 2000

The purpose of this study is to develop furniture design for the apartment based on the market research of furniture and interior design, and the survey on the design preference of hte apartment residents. The apartment furniture in living rooms, bed rooms and kitchens are designed according to the design concepts of preference image of apartment sizes: that of mid-size apartment(34pyung type) is Natural Modern image, large-size(59pyung type) is Korean Modern image, and extra large-size(81pyung type) is Classic Modern image. The living furniture is designed smaller in order to use the space flexibly, and the built-in furniture of bed rooms is designed simply like the wall of a room to be felt larger, basically. The furniture in kitchen is composed of the storage zone by high cabinets and the display zone by open shelves.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1995년도 제2회 KOSCI Workshop
• /
• pp.105-121
• /
• 1995

The objective of this study is to find out the design data for gas burner with an axal and radial type nozzles. The design parameters are chosen as the stabilizer type, the jet hole size of gas nozzle, the distance between gas nozzle and stabilizer, the size of stabilizer and the hole size of stabilizer, the stabilizer type with or without air swirler, the angle of swirler. For the experimental test combustor sizing ${\phi}1.3m{\times}L4.5m$ is designed and manufactured, in which the set up of power diagram, the exhaust gas analysis, blow-off test, the flame temperature and the direct photography are performed.