• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.13-24
• /
• 2019

Adolescence is a transitional stage of physical development which occurs during the period from puberty to adulthood. Going through this period, various parts of an adolescent's body grow at different rates, leading to different body shapes and proportions when compared to adults. Therefore, this study aimed to investigate the body sizes and shapes of junior high school boys from ages 13-15 based on body measurement items that are used as the basis for school uniform designs including jackets, shirts, and pants. For this, the study sought the basic data needed to develop body shapes and school uniform patterns for junior high school boys using the data from the 6th Size Korea Survey (2010). Specifically, it provided basic data for the development of school uniform patterns that fit well through the classification of bodies into particular types. After extracting body shape componen a cluster analysis using ANOVA was performed. According to the factor analysis conducted to determine body shape components, 5 factors were obtained as follows: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: characteristics of horizontal size, Factor 5: shape of the upper body with a variance of 82.62%. To classify junior high school boys' body shape was determined using various characteristics, and a cluster analysis was performed with the variables obtained by the factor analysis. For this, body shapes were classified into 3 different types: Type 1 accounted for 33.4%, with a total of 463 subjects. This type was a tall, long body individual with the smallest bulk and size. Type 2 accounted for 22.7%, with a total of 315 subjects. This type was large in bulk and horizontal size, but the lowest in height and length. Type 3 accounted for 43.9%, with a total of 610 subjects. This type was close to average in terms of horizontal size, length, and height. To develop well-fitting school uniforms for junior high school students, there should be further studies on changes in body shape and their associated causes. The study results will be available as basic data for comparing branded school uniform patterns for junior high school boys and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.3
• /
• pp.209-215
• /
• 2011

The objective of this study was to determine whether there are differences in hand muscle activities (APB : abductor pollicis brevis, ED : extensor digitorum, ECU : extensor carpi ulnaris, and EI : extensor indicis) and subjective discomfort according to the three mouse sizes (small, medium, large) and two task types (pointing and scrolling). The mouse size and task type showed significant interaction effects on the total NEMG (p = 0.004) and on the NEMG of the abductor pollicis brevis muscle (p = 0.001). The total NEMG and the NEMG of APB showed the highest value in the 'scrolling' task using the 'small' mouse. However, the NEMG of the EI was different according to the mouse size, and the 'small' mouse showed the lowest value. The subjective discomfort was the lowest in the 'medium' mouse, and all nine subjects preferred the 'medium' size. The hand-size related anthropometric variables showed different correlations according to the task type and mouse size with the NEMGs and subjective discomfort. The results of this study could be used as a basic information for the determination of the proper mouse size according to the hand size.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.152-172
• /
• 2007

This research suggest the correspondent sizes of women's and men's ready-made clothes to export to China on the basis of KS size specification. The results of this study, with the cooperation of Sejung and Searte Companies exporting clothes to Ningbo City, Zhejiang Province in China, are as follows: 1. Corresponding Dimensions of China Women's Clothes According to Morrison's relative deviation method, the body measurement characteristics of Chines and Korean women in their 30s and 40s were compared. As a result, Chinese women were bigger in height, arm length, abdomen girth, and upper arm girth but smaller in shoulder length and shoulder width. The cluster analysis for body type classification was as follows: Type 1, tall and well-developed, was 34.8%. Type 2 with weaker upper body, medium height, narrow shoulders and a slim waist was 45%. Type 3 with stronger upper body, shortest height and wide shoulders was 20.2%. 2. Corresponding Dimensions of China Men's Clothes Based on the drop standard of KS K 0050, the body types of Chinese men in their 20s were classified. A body types were 55.77%, Y body types were 32.16%, B body types were 11.55% and BB body types were 1.51%. According to the criteria of ready-made dimensions of normal body type suggested in Korea Standards, and in consideration of the basic distribution reality of body dimensions, representative 5 sizes were selected. 3. The corresponding size specification of China women's and men's clothes based on those of KS size specification were presented here, showing product sizes and physical items in detail.

• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.157-162
• /
• 2001

Rheological characteristics of Sm-Co type plastic magnet compound for powder injection molding process were investigated with the variation of the magnetic powder size, their relative contents and volume fraction using the mixture of fine and coarse powder. Shear viscosity of Sm-Co type compound was decreased with increasing the size of coarse powder due to the increase of powder packing density. However, the smaller the average size of fine powder resulted in the higher viscosity of compound due to the increase of agglomeration force. In case of mechanically milled Sm-Co type powder, the viscosity of compound with the mixture of coarse powder of 125∼75 ㎛ and fine powder of average size of 4.9 ㎛ greatly depends on their relative contents and shows a minimum value at the 60 % coarse powder fraction. This means that the compound shows a maximum packing density at the 60% coarse powder fraction. Compound viscosities satisfied well the rheological model with the volume fraction of magnetic powder, and maximum volume fraction of magnetic powder in Sm-Co type compound for powder injection molding was about 66%.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.599-607
• /
• 2006

텔레매틱스 정보단말기는 가독성, 시인성, 주행 안전성의 사용성과 HMI(Human Machine Interface)를 고려하여 설계해야 한다. 텔레매틱스 정보단말기 GUI을 구성하는 요소로 Menu Type, Menu Structure, Font Size 등이 있다. 그러나 한글이라는 지역적 특성에 대한 연구가 미흡한 상태이다. 따라서 본 연구에서 국내 운전자를 대상으로 텔레매틱스 정보단말기 GUI Factor에 대해 국내의 환경에 맞는 설계를 도출하였다. 피험자는 총 30명(남자 24명과 여자6명)을 대상으로 가상 주행 시스템을 이용한 시뮬레이션 환경에 Task를 수행하도록 하여 실험을 하였다. 분석은 ANOVA, 다원배치법, T-test, Font 일반식 대입을 통해 이루어졌다. Menu Type은 가로세로 2*3 배열의 형태와 버튼간 간격을 주행안전성 및 시인성에서 고려하여 설계해야 한다. Menu Structure는 3Depth가 3Frame 보다 주행안전성 및 시인성이 5%유의수준에서 더 우수하다고 나타났다. 운전자 안구 거리에 따른 Font Size를 도출하는 일반식은 어두운 글자인 경우 0.0069radian * d = Font Size 가 되고, 밝은 글자인 경우 0.0075radian * d = Font Size 가 된다. 위와 같이 본 연구는 GUI 세가지 항목에 대하여 국내 운전자의 사용성과 텔레매틱스 정보단말기 간의 인터페이스를 고려하여 기존의 시스템에 대하여 에러를 줄이고, 수행능력을 향상 시켜 주었다.

• Atmosphere
• /
• v.29 no.2
• /
• pp.227-239
• /
• 2019

This paper reviews various bulk-type cloud microphysics parameterizations (BCMPs). BCMP, predicting the moments of size distribution of hydrometeors, parameterizes the grid-resolved cloud and precipitation processes in atmospheric models. The generalized gamma distribution is mainly applied to represent the hydrometeors size distribution in BCMPs. BCMP can be divided in three different methods such as single-moment, double-moment, and triple-moment approaches depending on the number of prognostic variables. Single-moment approach only predicts the hydrometeors mixing ratio. Double-moment approach predicts not only the hydrometeors mixing ratio but also the hydrometeors number concentration. Triple-moment approach predicts the dispersion parameter of hydrometeors size distribution through the prognostic reflectivity, together with the number concentrations and mixing ratios of hydrometeors. Triple-moment approach is the most time expensive method because it has the most number of prognostic variables. However, this approach can allow more flexibility in representing hydrometeors size distribution relative to single-moment and double-moment approaches. At the early stage of the development of BMCPs, warm rain processes were only included. Ice-phase categories such as cloud ice, snow, graupel, and hail were included in BCMPs with prescribed properties for densities and sedimentation velocities of ice-phase hydrometeors since 1980s. Recently, to avoid fixed properties for ice-phase hydrometeors and ad-hoc category conversion, the new approach was proposed in which rimed ice and deposition ice mixing ratios are predicted with total ice number concentration and volume.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.135-158
• /
• 2006

The purpose of this study was to provide for the useful fundamental data by developing an appearl sizing system according to body types for Chinese Adult Female. Thus, it was to improve of fittness and coverage rate of exporting domestic clothing to China. For study, It was measured 1360 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1381 female women was seleted for development of apparel sizing system. Thus, this study was to characterize body types of Chinese adult female by classifying them into groups and set coverage rate of ready-made clothes by developing an apparel sizing system according to the Women's Wear Specifications(GB/T 1335.2-1997), National Standards of People's Republic of China. As for the method of this study was done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis. The result was as follows: The clothes dimension for upper and lower body and the coverage rate of body size that had the highest appearance ratio from the entire group was Y-type 160-84$\cdot$160-64(4.6%) and the section 160cm 32.4%, A-type 160-88$\cdot$160-72(3.3%) and the section 160cm 28.1%, B-type 155-88$\cdot$155-78(3.8%) and the section 155cm 27.8%, C-type 150-96$\cdot$150-88(2.5%). The result By setting of representative size number and production coverage rate for Chinese adult female. The representative size number of the entire group was set for 150-80A$\cdot$150-64A(1.0%), 155-84A$\cdot$155-68A(2.6%), 160-88A$\cdot$160-72A(3.3%), 165-84A$\cdot$165-68A (2.8%), 170-96A$\cdot$170-80A(0%). The production coverage rate for each representative size number was SS size the section 150cm 2.8%, size the section 155cm 17.0%, M size the section 160cm 31.6%, L size the section 165cm 25.0%, XL size the section 170cm 12.6% that covered 85.0%.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.298-302
• /
• 2012

Fe/$SiO_2$ core-shell type composite nanoparticles have been synthesized using a reverse micelle process combined with metal alkoxide hydrolysis and condensation. Nano-sized $SiO_2$ composite particles with a core-shell structure were prepared by arrested precipitation of Fe clusters in reverse micelles, followed by hydrolysis and condensation of organometallic precursors in micro-emulsion matrices. Microstructural and chemical analyses of Fe/$SiO_2$ core-shell type composite nanoparticles were carried out by TEM and EDS. The size of the particles and the thickness of the coating could be controlled by manipulating the relative rates of the hydrolysis and condensation reaction of TEOS within the micro-emulsion. The water/surfactant molar ratio influenced the Fe particle distribution of the core-shell composite particles, and the distribution of Fe particles was broadened as R increased. The particle size of Fe increased linearly with increasing $FeNO_3$ solution concentration. The average size of the cluster was found to depend on the micelle size, the nature of the solvent, and the concentration of the reagent. The average size of synthesized Fe/$SiO_2$ core-shell type composite nanoparticles was in a range of 10-30 nm and Fe particles were 1.5-7 nm in size. The effects of synthesis parameters, such as the molar ratio of water to TEOS and the molar ratio of water to surfactant, are discussed.

• Korean Institute of Interior Design Journal
• /
• v.26 no.5
• /
• pp.3-15
• /
• 2017

The study on bathroom plan for the elderly who use wheelchair has been done continuously. However, the elderly's behaviour at the bathroom and consideration for the caregiver has been underestimated. In this perspective, the purpose of this study is to find out how much more bathroom size is needed for the elderly who use wheelchair and the caregiver based on their behaviours. The study method is as follows: First, behaviours which occur at bathroom were collected from the previous research. Second, the size needed was calculated based on the elderly and caregiver's movement. Third, the size of bathroom enough for the impaired elderly with caregivers was suggested. The room next to shower booth and bath tub should be expanded for the caregiver. In addition, the room beside the basin should be added as much as $600{\times}600$ to let the caregiver stand and support the elderly when they are needed to wash their hair. As a result, the size of bathroom should be at least planed as follow; $1.3m^2$ more for type A, $1.5m^2$ more for type B, $1.6m^2$ more for type C, and $1.1m^2$ more for type D. As the bathroom is the room that the elderly want to modify for their rest of the lives, the room should be reserved enough from the early stage of design, so that this will make the elderly be possible stay at the place until they want to stay.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.132-138
• /
• 2003

The effect of synthesis condition, type of starting materials, mole ratio, mixing. aging, and crystallization temperature and time, on the size of FAU-type zeolite has been studied. Different mixing route may lead to the different phase of zeolite even with the same starting materials. In general, the size of particles is smaller after aging, especially at lower aging temperature. Two step mixture gel preparation method resulted to not only the reduction of crystallization time but also that of particle size, but without the aging of two mixture gels before the preparation of the overall gel in the second step, only the crystallization time was reduced, not the particle size. The FAU-type zeolite with average particle size 0.4$\mu$m and BET surface area 838 $m^2$/g was obtained from starting materials of liquid sodium silicate, sodium aluminate, and sodium hydroxide with two step preparation of mixture gel, aging of the mixture gels in two steps, which effectively reduced the crystallization time and particle size.