• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.778-783
• /
• 2012

Due to the increase of oil price, the needs of the reduction of the fuel cost is rising. Therefore, necessity of hybrid vehicle that runs with engine and the electric motor is on the rise. In order to improve the performance of hybrid vehicle, many researches is carried out. Hybrid vehicles have been developed with the various layout such as serial type, parallel type, power split type, and multi-mode type. The multi-mode hybrid vehicles are designed to show the efficient driving characteristics at low speed and high speed. But the multi-mode system have the problem such as frequent clutch engagement. Frequent clutch engagement causes the shock of vehicles, and the shock inhibits the ride comfort. In this study, automation mechanism of clutch operation is proposed to mitigate the shock at engaging clutch. For this purpose, the dynamic characteristics of motor control is numerically analyzed by using Matlab/Simulink.

• Journal of The Korean Association For Science Education
• /
• v.33 no.4
• /
• pp.863-879
• /
• 2013

The purpose of this study was to analyze task commitment types of science learning in high school students' biology classification. Thirty students were selected as the representatives of five task commitment types according to task commitment type inventory scores. They participated in think-aloud biology classification task. To analyze the procedural characteristics of task commitment, a coding scheme and think-aloud task were developed. Characteristics of respective task commitment types were identified from the result of the think-aloud protocol coding analysis. They are TGC(task goal commitment) type, LGC(low goal commitment) type, CC(conditional commitment) type, SC(suspended commitment) type, and DC(delayed commitment) type. Findings gained from this study are expected to serve as the foundation of task commitment enhancement strategies and as the information on the characteristics of each task commitment type. Also, future studies are required to investigate the commitment-related properties not only in biology classification but also in other science learning situations.

• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.2
• /
• pp.53-61
• /
• 2008

There are many ways to know the social and cultural level of each country. Among them, a theme museum are not only the best place to understand the history, the life style and the culture level. This thesis has the purpose to provide the basic material through analyzing the space composition and the visitor circulation of the theme museum and understanding the relativity of them so that the new theme museums can be designed in the right direction. So I chose the independence museum that opened with in recent 10 years, finally middle & small size's theme museum were selected. The results from the case study are as follow. Firstly, according to a result of analyzing the characteristics of space composition with the ratio of each part's area, space composition of each museum is mainly for the exhibition part, but rarely for the education part. Secondly, theme museums in Jeju have the limit of diversity of circulation method because they have not the free circulation method. Thirdly, the characteristics of space composition is divided into basic type, center-hall enter type, around the center-hall type and guidance type. Fourthly, by analyzing the characteristics of space composition and circulation method of traffic line, it's realized that selective circulation method was applied to basic type and center-hall enter type, and guidance circulation method was applied to around the center-hall type and guidance type.

• Journal of ILASS-Korea
• /
• v.28 no.2
• /
• pp.75-88
• /
• 2023

In this paper, the atomization characteristics of bi-swirl coaxial injectors for a 420 N-class bipropellant thruster were investigated. Three types of injectors, namely closed-type, open-type, and screw-type, were manufactured and designed to have the same spray angle and injection pressure drop. Water was used as a simulant, and cold-flow tests were conducted under ambient temperature and pressure conditions. Since the inner and outer injectors were designed to be the same type, only the inner fuel injectors that were easy to measure were used. Using a phase doppler particle analyzer, the velocity and diameter of atomized droplets were measured. Closed-type swirl injector exhibited droplet distributions with relatively high velocities and small SMD compared to the other two injectors. Open-type swirl injector formed droplets with reverse velocities in the center region and had a large recirculation zone. Screw-type swirl injector showed a sharp decrease in droplet velocity and size with radial distance from the liquid film breakup point. For the same design requirements, the closed-type swirl injector has superior atomization performance.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.2
• /
• pp.66-79
• /
• 1998

This study purposes to elucidate the characteristics of local water quality and the evolutional process of the spring water have been studied with the samples from 55 selected springs, from the coast region to the Baegrogdam, a caldera lake of Halla mountain in Cheju Island. Results of hydrochemical analyses in the 55 spring water show that Gwaneumsa is pollued with high hydrogen concentration, and spring waters from Yusuarmchun, Jangsumul, Dukjisemmul, Sinch'onk'nmul, Youngchunsa, Woonyangchun, Harwontongmul, Dongheamul, Seakdalsengsu, Andukkyekok, Dotimul, Kinmul, Harkangmul and Jungkeummul are polluted by the pollution sources from the surface surrounding ground. Spring waters of Samyang3suwon, Meungbusa, Sernurungmul, Tosanmul, Jungkeummul, Kwakgimul, Aewolharmul, Konemul and Nokgomul are also polluted from the sea water intrusion. The electrical conductivity, pH and the concentration of nitrate nitrogen and bicarbonate increase when the precipitation increases, but the concentration of sodium, chloride and sulphate decrease when the precipitation increases. The concentrations of potassium, magnessium and calcium are nearly independent of the precipitaion. Quality characteristics of spring water show complicated group of spring water through piper's trilinear diagram. The high mountain region consists of groups of sodium or potassium type and bicarbonate type; the middle mountain region consists of groups of sodium or potassium type and no dominant type; the low mountain consists of groups of no dominant type and sulfate or nitrate type; the coast region consists of groups of sodium or potassium type and chloride type or no dominant type. These characteristics indicate that the spring waters are changed from bicarbonate type in the high and middle mountain regions into non-bicarbonate type in the coastal region, as the precipitated waters flow downslope.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.563-570
• /
• 2001

In this study, the charactersistics of horizontal drains used to stabilize the dredged fill are investigated experimentally by doing tensile strength test, discharge capacity test, and filter clogging test. The types of the drains selected for the study are filament type (Tyre-E), embossed type(Type-P) and heat bonded cubic type with the thickness 10mm(Type-010) and 5mm(Type-05). The results of tensile strength and discharge capacity test show that the performance of drain Type-O10 was better than the other drains. This is caused by the fact that the lattice shape core of drain Type-O10 has strong rigidity and minimizes the loss of the sectional area of discharge with increased confining pressure. Analyzing the compatibility of filters by the results of the strength characteristics test and clogging test, the filter of filament type drain produced with polyester clothed polyamide performed well.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.29-32
• /
• 2004

Fully depleted Silicon-on-Insulator (FD-SOI) devices lead to better electrical characteristics than bulk CMOS devices. However, the presence of a thin top silicon layer and a buried SiO2 layer causes self-heating due to the low thermal conductivity of the buried oxide. The electrical characteristics of FDSOI devices strongly depend on the path of heat dissipation. In this paper, we present a new three-dimensional (3-D) analysis technique for the self-heating effect of the finger-type and bar-type transistors. The 3-D analysis results show that the drain current of the finger-type transistor is 14.7% smaller than that of the bar-type transistor due to the 3-D self-heating effect. We have learned that the rate of current degradation increases significantly when the width of a transistor is smaller that a critical value in a finger-type layout. The current degradation fro the 3-D structures of the finger-type and bar-type transistors is investigated and the design issues are also discussed.

• The Journal of Internal Korean Medicine
• /
• v.33 no.4
• /
• pp.558-571
• /
• 2012

Objectives : The purpose of this study was to verify the difference in diet, digestion, sweat, feces and urination characteristics according to body shape characteristic. Methods : 1,302 participants were divided into 4 body types and were assessed through the questionnaire about Sasang constitution's ordinary symptoms such as diet, digestion, sweat, feces and urination characteristics. Results : Hyeong-keum type had active characteristics in the size of their meal and speed of taking meal. Hyeong-keum type got the most in the amount of sweating. And Yo-wi type reported the greatest urinary frequency. Conclusions : The difference of body type influences Sasang constitution's ordinary symptoms such as diet, sweat and urination. In digestion and feces, there was no statistical significance in the difference.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.5 no.1
• /
• pp.17-23
• /
• 2005

To begin with, this research arranged this concepts by analyzing paper a reference paper. So, the theory was arranged by approaching the ideal, formative and contemporary side. In order to type characteristics expression of organic design, after year 2000 printed in "Interiors" journal analyzed the contents based on interior works. 1. A type of metaphorical expression, order and the imitations of animals and plants. 2. A type of non liner, and dynamical balance and irregularity. 3. A type of mass of indeterminate form. 4. A type of fluidity by a curved line and a curved surface.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.56-63
• /
• 1997

Sealing of lubricant-air mixture in the high performance machining center is one of most the important characteristics to carry out enhanced lubrication. High speed spindle requires non-contact type of sealing mechanism. Evaluating an optimum seal design to minimize leakage is concerned in the aspect of flow control. Effect of geometry and leakage path are evaluated according to variation of sealing geometry. Velocity, pressure, turbulence intensity of profile is calculated to find more efficient geometry and variables. This offers a methodological way of enhancement seal design for high speed spindle. The working fluid is regarded as two phases that are mixed flow of oil phase and air phase. It is more reasonable to simulate an oil jet or oil mist type high speed spindle lubrication. Turbulence and compressible flow model are used to evaluate a flow characteristic. This paper considers a design effect of sealing capability of non- contact type seals for high speed spindle and analyzes leakage characteristics to minimize a leakage 7 on the same sealing area.