• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.794-797
• /
• 2004

In this study, tensile adhesive strength(TAS) test was carreid out for evaluated the effects of temperature conditions (-20, -10, 0, 5, 10, 20, 30, $40^{\circ}C$) on the tensile adhesive characteristics about 4 type waterproofing membranes which were commercially used in bridge decks. And, failure appeariences of waterproofing systems in each temperature after TAS test were observed the sawing surfaces of waterproofing systems for whether or not damaged of waterproofing membranes. Also, correction coefficient of TAS with temperature were calculated using 4 type waterproofing membrane. It could be shown that the higher TAS and shear adhesive strength, the lower temperature, regardless of the type of waterproofing membrane. Temperature sensibility of TAS was especially remarkable in epoxy membrane. Failure type was occurred the ductile failure in $30^{\circ}C\;and\;40^{\circ}C$. From these results, it was shown that if ambient temperature above $30^{\circ}C$ maintains for a long time, waterproofing membrane will be deformed by softening. Otherwise, waterproofing membrane in temperature below $20^{\circ}C$ shown that occurred the brittle failure. From the results of visual observation of cutting surface for specimen, the thin waterproofing membranes shown indented by hot aggregate of the asphalt mixtures. Therefore, it could be known that the specification of waterproofing membrane thickness is necessary by waterproofing membrane type. As temperature change varied with pavement depth, the interface temperature was more important than ambient temperature in TAS test. Now, TAS test results were limited only in $-10^{\circ}C\;and\;20^{\circ}C$ temperature, but correction coefficient of TAS by ambient temperature could be used as a solution to deal with this problem.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.2
• /
• pp.298-302
• /
• 1994

This study is carried out in order to investigate to the physical property of Castella. The material is 19 kinds of Castella on the market in Kyushu area.As an result of the sensory evaluation for Castella, it could be classified into 3 types ; a) high grade, C) low grade, and B) midium grade.The results are summarized as follow. The water content of 3 type Castella was most 26-30% but Korea's was more lower . ΔE of A an dB type Castella was similiar , but A and C types was very different. in the Creep test, 3 types are all the 6-element Voigt model, consisting of Hookean body , Newtonian body and two sets of Voigt body. Eo of A type is 13-36% higher than other types. The parts of retardation strain of A type are 21-41% lower than B type, 8-13% higher than C type, respectively.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.58-73
• /
• 2006

The purpose of this study was to improve of fittness and coverage rate of exporting domestic clothing to China for Chinese Adult Female. For study, It was measured 1381 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1360 female women was seleted for development of apparel sizing system. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, correlation analysis, factor analysis, ANOVA(t-test and F-test), duncan's multiple test. The result was as follows: Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1:constitutional obesty and width size, factor 2: longistudinal body size, factor 3: shoulder form and size, factor 4: longistudinal upper body size, factor 5: under body size, factor 6: shoulder dropping. According to the Women's Wear Specifications(GB/T 1335.2-1997) by drop, body types of Chinese Adult female was classified into six types, it was Y, A, B, C and Z, D. In order, A type as standard somatotype(49.8%), B type(26.9%), Y type (18.8%), C type(2.9%). Y type had the average height and shoulder, bust girth. They were slimmer in overall terms. A type had a normal obesity and body size in height, shoulder, bust girth. They were average Chinese Women. B type had a smaller then A type. They were more obes and thick waist girth. C type had the highest obesity, the widest shoulder and bust girth, and thick waist girth. The characteristics of each body type following the body type structure factor are Y-type for slender type, A-type for standard type, B-type for slightly large type, and C-type for obese type. For each region, the Beijing area had in the order of A-type, Y-type, B-type and C-type, and the Shanghai area had in the order of A-type, B-type, Y-type and C-type.

• Journal of Korean Biological Nursing Science
• /
• v.5 no.1
• /
• pp.5-12
• /
• 2003

The purpose of this study to compare of clinical profile between obese and nonobese type 2 diabetic patients. The subjects were consist of 111 obese (50 male, 61 female) and 159 non obese (79 male, 80 female) type 2 diabetic patients underwent fasting blood glucose, 2-hour postprandial blood glucose, $HbA_1c$, total cholesterol, triglyceride, high density lipoprotein, microalbuminuria, fasting C-peptide and 2-hour postprandial C-peptide were measured. Diabetes was diagnosed according to the American Diabetes Association (ADA) criteria. Obesity was defined as body mass index (BMI, kilograms per meters squared) ${\geq}23$. Data analyses were t-test, chisquare test in SAS program. The results were as follows : 1) Triglycerides and 2-hour postprandial C-peptide were significant higher in obese than non-obese patients. 2) Systolic blood pressure, Diastolic blood pressure, fasting blood sugar, 2-hour postprandial blood glucose, $HbA_1c$, total cholesterol, high-density lipoprotein, microalbuminuria and fasting C-peptide were no difference between obese and non-obese groups. These data indicate that obesity is a risk factor for the development of coronary heart disease (CHD) in diabetic patients. Therefore, weight reductions have beneficial effects on insulin action and glycemic control in obese type 2 diabetic patients.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• Corrosion Science and Technology
• /
• v.3 no.5
• /
• pp.222-225
• /
• 2004

A portable RF HTS SQUID-based susceptometer was applied to the measurement of fatigue behavior for type 316L(N) stainless steel containing 0.04% to 0.15% nitrogen content. Strain-controlled low cycle fatigue (LCF) tests were conducted at RT and $600^{\circ}C$ in air an atmosphere, and the magnetic moments were measured after the fatigue test using HTS SQUID. The magnetic moment of an as-received sample is higher than that of a fatigued sample in all the temperature ranges irrespective of the nitrogen content. The fatigue life decreased with an increasing test temperature up to $500^{\circ}C$, but increased at $600^{\circ}C$. The change of the magnetic moments by LCF test is attributed to the stress induced micro defects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.59-66
• /
• 2014

Insulation of rooftop is one of the major performance to energy-saving construction. Further, waterproofing performance is also important. For such a reason, it is need to develop waterproofing method containing thermal insulation property. This study was wanted to evaluate thermal insulation performance about the composite waterproofing method of thermal supplement type that is developed recently. As a result of waterproofing performance test, every test item was showed over the performance standards of KS (Korean (Industrial) Standards). And the result of thermal insulation performance test, the highest temperature in the styrofoam box was $25.91^{\circ}C$, the bubble sheet box was $17.28^{\circ}C$, the insulation sheet box was $15.47^{\circ}C$ and the waterproofing sheet box of thermal supplement type was $24.11^{\circ}C$. In observations of thermal bridges of sheet's joint, thermal bridges was not identified at the sheet's joint. As a result, composite waterproofing method of thermal supplement type is interpreted to have thermal insulation performance.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.2 s.69
• /
• pp.52-58
• /
• 2006

The effect of various environmental conditions on the durability of E-glass fiber/vinylester resin composites have been investigated using the tensile test specimen of strand type. It was found that the durability test method performed by the stand type specimen was more convenient and reliable than other conventional test method. The weight gains increased with the immersion time in both water and alkaline solution, and the Weight gains at $50^{\circ}C$. were much bigger than those at $20^{\circ}C$ in both conditions. The tensile strength decreased with the pass of immersion time in all aqueous solution, and the tensile strength at $80^{\circ}C$ in alkaline solution decreased very steeply at beginning of immersion time. The decrement of tensile strength according to the immersion time in various environmental conditions was mainly caused by the degradation of interface and the damage of glass fiber surface.

• Asian Oncology Nursing
• /
• v.3 no.2
• /
• pp.103-111
• /
• 2003

The purpose of this study was to identify the effect of imagery therapy on "coping mechanism and type C personality of the women with mastectomy. To achieve this purpose, 2 hours sessions of imagery therapy were given to the patients with breast cancer twice a week for 6 weeks. The period of data collection was from July, 7th to August, 12th 2002. The participants were 30 patients, 15 experimental group, 15 control group who were treated at the G University hospital in J City. This study was designed using a quasi-experimental approach with non-equivalent Pre test-Post test Design. The themes for the Imagery Therapy Program were composed of Leuner's(1969) 12 Imagery Themes: flower, green-field, stream, mountain, house, woods, significant figures, rose, lion, ideal self-image, cave and volcano. The data were analyzed with ${\chi}2-test$ and MANOVA using the SPSS program. The course of image change of the 12 imagery themes was analyzed by content analysis. The results of this study are as follows: First Hypothesis, 'The score of type C personality in the women with mastectomy who received imagery therapy will be significantly lower than that of the control group' was supported(p<.05). Second Hypothesis, 'The score of coping mechanism' in the women with mastectomy who received imagery therapy will be significantly higher than that of the control group' was rejected. In conclusion, imagery therapy is suggested as an effective nursing intervention to change type C personality of the women with mastectomy, but not effective to improve coping mechanism. Therefore, the program for the women with mastectomy should be developed to change their coping mechanism, method of problem solving and Quality of life.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.37-43
• /
• 2012

PURPOSES : This study is to evaluate the feasibility of setting the standard of cement alkali content by using ASTM C 1260(accelerated mortar bar test) METHODS : This study analyzes the ASR(alkali silica reaction) expansion of cement mortar bar based on the changes in the aggregate type(fine, coarse), cement type(ordinary, low alkali), and replacement contents of fly ash. ASR tests were conducted according to ASTM C 1260. RESULTS : In this test results, There is no big difference in the ASR expansion between ordinary cement and low alkali cement. From this test results, it was found that the variation of cement alkali content did not have a effect on ASR expansion because mortar bar was placed in a container with sufficient alkali aqueous solution at high temperature during the test process of ASTM C 1260. CONCLUSIONS : It is evidently clear that the alkali content of cement have a effect on ASR. But ASTM C 1260 is difficult to assess this effect.