• Particle and aerosol research
• /
• 제16권4호
• /
• pp.119-130
• /
• 2020

In this study, we developed a separated two-stage electrostatic precipitator applicable in a subway air conditioning system. We studied the characteristics of collection efficiency of 0.3 ㎛ particle and ozone generation at different charger sizes and gaps of collector plates. Also, we compared the performance of the two-stage ESP to the MERV 10 filter with the removal efficiency of 10% used in actual subway air conditioning system. The maximum collection efficiency of 0.3 ㎛ particle was 93% at A charger (600 mm×250 mm×600 mm) and 84% at B charger (330 mm×280 mm×330 mm). Especially, with voltages applied to chargers with collection efficiency of about 80% or more, the ozone concentration of two different chargers was 5 ppb to 35 ppb. Finally, the filter quality of the collector developed in this study was 400 times higher than that of the MERV 10 filter. Therefore, it was concluded that the two-stage ESP could be a promising PM removal device suitable for subway air conditioning system.

• Journal of the Korean Society for Precision Engineering
• /
• 제26권8호
• /
• pp.112-118
• /
• 2009

A pressure rise is generated while air bearing stages are moving in high vacuum environment. This study analyzed this pressure rise phenomenon theoretically and verified it experimentally using two different kinds of stages - linear and rotary air bearing stages. Results indicate that the pressure rise was caused by additional leakage resulting from stage velocity, along with adsorption and outgassing of gas molecules from the guide rail surface. Though tilting of the stage due to acceleration and deceleration reached several micrometers, it had a negligible effect on pressure rise because the tilting time was very short. Therefore, a rotary air bearing stage showed much less pressure rise than a linear stage because the rotary stage theoretically has nothing to do with the above causes. Additional leakage caused by stage velocity was inevitable if the stage had movements, but pressure rise caused by adsorption and outgassing could be suppressed by improving the surface quality to reduce real surface area, and by coating the guide rail surface with titanium nitride (TiN) which has less adhesion probability of gas molecules. The results also indicate that the pressure rise increased when the air bearing stage operated under high vacuum conditions.

• Journal of environmental and Sanitary engineering
• /
• 제5권1호
• /
• pp.83-92
• /
• 1990

Adapting two step aeration system to a waste water treatment of W-paper manufactory as Full-Scale Plants, we drew a following conclusion from its practical working. 1. Because BOD removal efficiency was 20% in A-Stage, 90% in B-Stage and total removal efficiency was 97%. It worked treatment plant well and was suitable for effluent water standard as well. Because COD removal efficiency was 42% in A-stage, 71% in B-stage and the total removal efficiency was 94% COD control was possible in effluent water quality. 2. Treatment efficiency according to a load capacity was average 20% in 1.401 BOD kg/m3/d load of A-Stage and average 90% in 0.273 BOD kg/$\textrm {m}^3$ / d load of B-Stage. 3. Treatment efficiency according to a ratio of F/M was 2.657--5.024 kg BOD/kg MLSS/d in A-Stage and BOD removal efficiency was 16-261 in the same stage. The ratio of F/M was 0.068-0.094 kg BOD /kg MLSS/d and BOD removal efficiency ratio was 85-94%. Therefore treatment efficiency could be kept stably and volume of aeration tank could be reduced wholly. 4. Treatment efficiency according to MLSS appeared BOD 20%. COD 42%, in A-Stage and removal efficiency appeared BOD 90%, COD 71% in B-Stage. They were suitable for plan condition. 5. Because of working of complemented treatment plant by AB-Process. 20,000,000 Won a month was saved than the ordinary working cost. Therefore, it was assumed that invested cost could be recollected in 19 months or so consequently.

• Journal of Ecology and Environment
• /
• 제33권2호
• /
• pp.149-155
• /
• 2010

This study was conducted to investigate the feeding efficiency of the cattle egret (Bubulcus ibis) and the intermediate egret (Ardea intermedia) in relation to the stage of rice culture during two breeding seasons, 2006 and 2007, in Asan city, Chungcheongnam-do, South Korea. Cattle egrets caught mainly small invertebrate prey (insects and spiders, 98.4%) during all stages of rice cultivation, and had a higher prey capture rate in the plowing stage (14.98 prey/min) than in other stages (2.82-3.51 prey/min). Therefore, the biomass intake rate of cattle egrets was highest in the plowing stage. The intermediate egret captured both loaches (43.4%) and small invertebrates (50.6%). The prey capture rates of intermediate egrets increased gradually from the flooding stage (0.38 prey/min) to the planting stage (1.09 prey/min), and decreased in the growing stage (1.04 prey/min). However, intermediate egrets had the highest biomass intake rates in the plowing stage because more loaches were caught in the plowing stage (0.54 loaches/min) than other stages (0.23-0.36 loaches/min). Consequently, both intermediate egrets and cattle egrets had high energy intakes in the plowing stage and rice fields provided an important feeding habitat for both species.

• International Commerce and Information Review
• /
• 제11권3호
• /
• pp.363-390
• /
• 2009

This study investigates the role of private participation in FTA Negotiation in case of US, Mexico and Japan. We utilize Putnam(1988)'s two stage negotiation model, Schelling Conjecture and Principal-Agent(P-A) theory to understand the role of private sector in FTA Negotiation. Those theories are useful to understand the behavior and interaction of key players such as private sector, congress and government in FTA negotiation. Putnam(1988)'s two stage negotiation model divides the FTA negotiation process into two processes: the external negotiation with foreign country and domestic negotiation with domestic interest group. Principal-Agent(P-A) theory provides the theoretical foundation of Putnam's two stage negotiation model, which is that principal's interest is not identical to the interest of Agent. We showed that the private sector and congress play an important role in FTA negotiation in United States. In case of Mexico, the private sector and government occupy the dominant position in FTA negotiation. In particular, the cooperation of industry and government has been successfully established via COECE in Mexico. In contrast to these countries, the role of private participation in trade policy is relatively low in Japan and Korea.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제25권11호
• /
• pp.1518-1526
• /
• 2001

In this paper, the mechanism of unsteady potential interaction and wake interaction in one stage axial turbine is numerically investigated at design point in two-dimensional viewpoint. The numerical technique used is the upwind scheme of Van-Leer's Flux Vector Splitting (FVS) and Cubic spline interpolation is applied on zonal interface between stator and rotor. The inviscid analysis is used to embody the influence of potential interaction only and viscous analysis is used to embody the influences of both potential interaction and wake interaction at the same time. The potential-flow disturbance from the stator into a rotor passage and the periodic blockage effect of rotor produce the unsteady pressure on the blade surface in inviscid analysis. After the wake is cut by rotor, two counterrotating votical patterns flanking the wake centerline in the passage are generated. So, these phenomena magnify the unsteady pressure in viscous analysis than that in inviscid analysis. The resulting unsteady forces on the rotor, generated by the combined interaction of the two effects by potential and wake interaction, are discussed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.209-214
• /
• 2002

Computations were performed to investigate the flow, temperature and pollutants in two stage heavy-oil combustion burner. The burner geometry and flow conditions were provided by a burner company. The goal of the study is to understand combustion phenomena according to each air inlet's velocity, excessive air ratio and air temperature through CFD. Air flow rates at two inlets are adjusted by a damper inside a burner. Here, injection conditions of liquid fuel are kept constant throughout all simulations. This assumption is made in order to limit the complexity of oil combustion though it may cause some disagreement. The final goal of this research is to design a Low-NOx heavy oil combustion burner through comparison between computational study and experimental ones. Besides experiments, simulation works can give us insights into heavy oil combustion and help us design a Low NOx burner while saving time and cost. The computational study is based on k-e model, P-1 radiation model(WSGGM) and PDF, and is implemented on a commercial code, FLUENT.

• IEMEK Journal of Embedded Systems and Applications
• /
• 제17권2호
• /
• pp.77-83
• /
• 2022

In this paper, the two-stage object detection approach is proposed to implement a deep learning-based label inspection system on edge computing environments. Since the label printed on the products during the production process contains important information related to the product, it is significantly to check the label information is correct. The proposed system uses the lightweight deep learning model that able to employ in the low-performance edge computing devices, and the two-stage object detection approach is applied to compensate for the low accuracy relatively. The proposed Two-Stage object detection approach consists of two object detection networks, Label Area Detection Network and Character Detection Network. Label Area Detection Network finds the label area in the product image, and Character Detection Network detects the words in the label area. Using this approach, we can detect characters precise even with a lightweight deep learning models. The SF-YOLO model applied in the proposed system is the YOLO-based lightweight object detection network designed for edge computing devices. This model showed up to 2 times faster processing time and a considerable improvement in accuracy, compared to other YOLO-based lightweight models such as YOLOv3-tiny and YOLOv4-tiny. Also since the amount of computation is low, it can be easily applied in edge computing environments.

• Structural Engineering and Mechanics
• /
• 제86권4호
• /
• pp.573-587
• /
• 2023

A conventional tuned mass damper (TMD) provides a passive control option to suppress the structures' wind- or earthquake-induced vibrations. However, excessive displacements of the TMD raise concerns in the practical implementation. Therefore, this study proposes a novel TMD designed for and deployed on a high-rise sightseeing tower. The device consists of an integrated two-way slide rail mount and an eddy current damper (ECD) with a stroke control mechanism. This stroke control mechanism allows the damping coefficient to automatically increase when the stroke reaches a predetermined value, preventing excessive damper displacements during large earthquakes. The corresponding two-stage damping parameters are designed with a variable-thickness copper plate to enable the TMD stroke within a specified range. Thus, this study discusses the detailed design schemes of the device components in TMD. The designed two-stage damping parameters are also numerically verified, and the structural responses with/without the TMD are compared. As seen in the results, the proposed TMD yields effective control authority to limit the acceleration response within a comfort level. In addition, this TMD resolves the spatial availability for the damper movement in high-rise buildings by the controllable damping mechanism.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• 제33B권6호
• /
• pp.156-163
• /
• 1996

In this paper, we propose VLSI architectures for the full search block matching algorithm (FS BMA) and two-stage BMA using integral projections that reduce greatly computational complexity with its performance comparable to that of the FS BMA. The proposed VLSI architectures are faster than the conventional ones with lower hardware complexity. Also the proposed architectures of the FS BMA and two-stage BMA are modeled in VHDL and simulated to show their functional validity.