• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.14 no.4
• /
• pp.7-12
• /
• 2018

Energy performance of electric heater and geothermal source heat pump type hot air dryers are compared in this study. For set temperatures of $30^{\circ}C$, $35^{\circ}C$ and $40^{\circ}C$, radish is dried from initial mass 60 kg until it gets 5 kg, where the difference equals the amount of water removed. As set temperature is increased, drying time is shortened for both electric heater and heat pump types, however energy efficiency is decreased due to increasing electricity consumption. Moisture extraction rate(MER) of electric heater is 2.58~2.84 kg/h, and for heat pump type 2.56~2.71 kg/h, showing little difference between the two types. Specific moisture extraction rate (SMER) of electric heater is 0.94~0.96 kg/kWh, and for heat pump type 1.72~2.21 kg/kWh. SMER of heat pump type is greater by 0.78~1.25 kg/kWh than the electric heater hot air dryer, which is 1.8~2.3 times better in terms of energy efficiency.

• Journal of the military operations research society of Korea
• /
• v.22 no.1
• /
• pp.114-128
• /
• 1996

In this paper, a life distribution fitting method based on generalized phase-type distributions(GPH) is presented. By fitting the life distribution to a GPH, we can utilize various useful properties of the GPH. Two different approaches are used according to the properties of the given failure time data. One is an approximation to a GPH through the piecewise Weibull failure rate(PWF) model and the other is a direct approximation to a GPH using the empirical distribution function. Two numerical examples are also presented. In the first example, both of the two approaches are utilized and compared for an incomplete data set. And in the second example, the direct approximation method from an empirical distribution is utilized for the analysis of a complete data set. In both cases, we could confirm the validity of the proposed method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.4
• /
• pp.520-529
• /
• 2014

Experiment was set up to analyze bycatch and discards situation including snow crap Chionoecetes opilio of whelk trap. Four types of trap were used: drum type trap with PE net; drum type trap with PBS net; cylinder type trap with PE net; and cylinder type net with PBS net. Three funnels were attached in drum type trap and two funnels were used in cylinder type trap. A fleet of traps was consisted with one hundred traps. 25 traps of each type were set on a line in repeated sequence. Field experiments were conducted with 6 fishing operations in the Uljin waters, East Sea in July 2014. Catch of target whelks were 173,261 g and catch rate was 48.7% of total catch, while bycatch were 182,571 g, 51.3% of tatal catch. The catch rate of bycatch was 2.6% higher than that of target catch. Bycatch weight of snow crap was the highest as 142,987 g and formed about 40.2% of total catch, followed giant octopus, Enteroctopus dofleini, 31,762 g (8.9%). Bycatch rate of cylinder type trap was 2.3 times higher than that of drum type trap. Discard rate (discard/(discard+landing)) was 43.6%. Discard rate was the highest at cylinder type trap with PBS net as 63.1%, followed cylinder type trap with PE net as 47.9%, drum type trap with PE net as 33.4%, the lowest at drum type trap with PBS net as 22.1%.

• East Asian mathematical journal
• /
• v.19 no.1
• /
• pp.41-48
• /
• 2003

There are many conditions or identities for a lattice to be distributive. In this paper, we study some identities on algebras of type (2,2) and find another set of identities defining distributive lattices. We also study certain identities which define algebras of type (2,2) whose subalgebras generated by two elements are all distributive lattices with at most 4 elements.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.205-210
• /
• 2008

The research interprets the principles of sampling error design for quality statistics models such as hypothesis test, interval estimation, control charts and acceptance sampling. Introducing the proper discussions of the design of significance level according to the use of hypothesis test, then it presents two methods to interpret significance by Neyman-Pearson and Fisher. Second point of the study proposes the design of confidence level for interval estimation by Bayesian confidence set, frequentist confidential set and fiducial interval. Third, the content also indicates the design of type I error and type II error considering both productivity and customer claim for control chart. Finally, the study reflects the design of producer's risk with operating charistictics curve, screening and switch rules for the purpose of purchasing and subcontraction.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.166-169
• /
• 1997

For parallel processing, the compiler partitions a loaded program into a set of tasks and makes a schedule for the tasks that will minimize parallel processing time for the loaded program. Building an optimal schedule for a given set of partitioned tasks of a program has known to be NP-complete. In this paper we introduce a GA(Genetic Algorithm)-based scheduling method in which a chromosome consists of two parts of a string which decide the number and order of tasks on each processor. An additional computation is used for feasibility constraint in the chromosome. By granularity theory, a partitioned program is categorized into coarse-grain or fine-grain types. There exist good heuristic algorithms for coarse-grain type partitioning. We suggested another GA adaptive to the coarse-grain type partitioning. The infeasibility of chromosome is overcome by the encoding and operators. The number of processors are decided while the GA find the minimum parallel processing time.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.612-615
• /
• 2007

This research studies the Virtual Reality simulation of Newton's physics law on rigid body type of objects for physics learning. With network support, collaborative interaction is enabled so that people from different places can interact with the same set of objects in Collaborative Virtual Environment. The taxonomy of the interaction in different levels of collaboration is described as: distinct objects and same object, in which there are same object - sequentially, same object - concurrently - same attribute, and same object - concurrently - distinct attributes. The case studies are the interaction of users in two cases: destroying and creating a set of arranged rigid bodies. We identify a specific type of application for contents authoring with modeling systems integrated with real-time physics and implemented in VR system. In our application called Virtual Dollhouse, users can observe physics law while constructing a dollhouse using existing building blocks, under gravity effects.

• Journal of Environmental Impact Assessment
• /
• v.3 no.1
• /
• pp.9-30
• /
• 1994

Environmental Impact Assessment System, ever since its enactment in Korea fourteen years ago, has been steadily improved by introduction and implementation of new concepts and methodologies which include Environmental Impact Statement(EIS) preparation technique, selection of environmental factors, and the like. However, current guideline requires that every EIS, regardless of the specifics of the project type or characteristics of the site, must evaluate and study for all twenty-two environmental factors as set forth in the regulation. The situation causes many undesirable problems like; lack of site specific evaluation in most EISs, over-sized EIS drafts, consuming too much time and costs for EIS preparation, and so on. The objectives of this study are: - To establish a set of criteria to classify the types of the projects in terms of features of the project content and the characteristics of the site area. - To establish a guideline for selecting major environmental factors of the project type criteria, and - To provide basic materials for the preparation of complets draft EIS of the Amendment of Environmental Impact Assessment Act.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.201-207
• /
• 2020

This study focused on finding out how transformational leadership, emotional leadership, and servant leadership in military organizations affected organizational effectiveness (commission satisfaction, immersion, and organizational citizen behavior) by special forces, standing forces, GTO, independent units on the coast, and educational institutions and training units. Therefore, in order to achieve this research objective, we intend to utilize two studies, the literature and the empirical studies, in this paper. Through the literature study, we also set up a critical consideration of the major leadership theory so far, understand the soldiers of the new generation, set up the background and characteristics of the new leadership theory, transformative leadership and emotional leadership, and set up and study the hypothesis for the organizational effectiveness in the main contents (concepts, components, measurement data) and variables. Empirical research is aimed at empirically analyzing the impact of transformative leadership, emotional leadership, and servant leadership on sub-type and organizational effectiveness, and whether sub-type controls leadership type and organizational effectiveness. organizational effectiveness.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.99-105
• /
• 2017

Type-2 fuzzy sets are preferred over type-1 sets as they are capable of addressing uncertainty more efficiently. The fuzzifier values play pivotal role in managing these uncertainties; still selecting appropriate value of fuzzifiers has been a tedious task. Generally, based on observation particular value of fuzzifier is chosen from a given range of values. In this paper we have tried to adaptively compute suitable fuzzifier values of interval type-2 possibilistic fuzzy c-means (IT2 PFCM) for a given data. Information is extracted from individual data points using histogram approach and this information is further processed to give us the two fuzzifier values $m_1$, $m_2$. These obtained values are bounded within some upper and lower bounds based on interval type-2 fuzzy sets.