• International Journal of Internet, Broadcasting and Communication
• /
• 제6권1호
• /
• pp.13-15
• /
• 2014

We develop a method to fabricate a flexible thin film audio systems using polyvinylidene fluoride(PVDF). The system we designed showed the properties of increased flexibility, transparency, and sound pressure levels. As an input port of two terminals, transparent oxide thin film with a low resistivity is adopted. In order to provide dielectric insulation, a transparent insulating oxide thin film is coated to obtain double-layered structure. In the range of visible light, the output from the output of the system showed a increased and improved sound pressure level. The piezoelectric polymer film of PVDF is used to produce mechanical vibration due to the applied electrical voltage signal. An analog electric voltage signal is transformed into sound waves in the audio system.

• 한국항해학회지
• /
• 제16권4호
• /
• pp.55-63
• /
• 1992

This computer simulation is the basic research for realize a real-time hardware of the reproduction system in original sound field with two loudspeakers based on the OSS(Ortho Stereophonic System) method which was proposed by Hamada of Japan in 1983. Through the computer simulation, presumed the system function of OSS equalizer using HRTF(Head Related Transfer Function), constructed the model of OSS equalizer and , evaluated the modelling OSS equalizer by evaluation formula. The obtained results are summarized as follows : 1) By the modelling OSS equalize operate as inverse filter of HRTF, an input signal reproduced effectively. 2) Known that the real-time hardware of OSS equalizer can be made by the fast convolution between the impulse response of OSS equalizer and input speech signal. 3) Since the system function of OSS equalizer presumed from HRTF, the study on the measuring of HRTF have to proceed.

• 한국통신학회논문지
• /
• 제11권4호
• /
• pp.259-267
• /
• 1986

주파수와 바이어스 조건에 따라 GaAs MESFET의 소신호 S파라미터들을 측정하고, 4단자 회로망 해석에 의한 고정 주파수 마이크로파 발진기의 공진회로와 부하정합회로를 CAD로 최적화 설계하였다. 마이크로스트립 기판을 써서 6GHz의 발진기를 설계 제작하여 최적화한 자료와 실험 결과가 부합됨을 확인하였다.

• 한국조경학회지
• /
• 제25권2호
• /
• pp.31-42
• /
• 1997

Visibility has been used for Visual Impact Assessment and Buildingheight Control. The purpose of this study is to elaborate visibility analysis technique in GIS, and to design a visual information system baed on this technique for diverse application. The results of this study are as follows : 1) By classifying visibility analysis techniques into two groups, Each one's merits and demerits were investigated. Practically GIS visibility analysis by DTM model using contour map and investigating it by means of site-observation can be the most effective method. 2) A visibility analysis techniquwe for V.I.A. and B.H.C. was presented by studying GIS visibility analysis by means of DTM model using contour map. There were 5 problems. 3) Adequate analysis techniques were presented according to the landscape factor-road, ship-route, port, mountain, etc. 4) Viewing distance from road and ship-route in visual corridor, landma가 visibility and distance, the angle of incidence and invisible region's depth are helpful for land scape management or land use planning.

• 산업경영시스템학회지
• /
• 제18권35호
• /
• pp.1-8
• /
• 1995

Automatic inspection system software for display image characteristic of CRT is developed. There are two major contributions of this software development. One is that the data from measuring equipments which was usually collected manually is automatically collected through RS-232C port and is saved in computer, then, trend analysis graph and final reports are generated. The other is that evauation of characteristic of electron gun was automatically processed by CCD camera and image processing technique. The system is developed under MS-Windows environment utilizing Borland C++4.0 Compiler and DT 3852-8 image processor board. This system can save the time and man power to measure and to anayze the image characteristics relative to current method.

• 한국광학회지
• /
• 제13권5호
• /
• pp.408-413
• /
• 2002

We demonstrated a polarization dependent type 2$\times$2 optical switch, using a binary reflection type SLM. Reflection type FLC was used as a half wave retardation plate. Two inputs were controlled by each SLM for the desired output direction. In conclusion, in the "1" state the average optical loss was 6.6 ㏈, and in the "0" state the average optical loss was 14.6 ㏈, and measured the switching speed as 75 $mutextrm{s}$. By using this method, a polarization dependent type 2$\times$2 optical switch can be demonstrated and the possibility of a 4-port WDM optical switch also verified.

• 한국위성정보통신학회논문지
• /
• 제11권4호
• /
• pp.1-9
• /
• 2016

본 연구는 PPI Scop 레이더 장치에서 수신된 정보신호 중 영상신호 분리와 합성과정을 거쳐 영상신호 생성, 심볼생성, 양성 잔상 신호 생성 결합 처리 과정을 거쳐 레이더 정보 분석용 화면에서 운영자의 판별 용이성, 가독성 향상과 더불어 운영 편리성을 획기적으로 향상시킬 수 있는 기술적 구현방안에 대하여 2가지 형태로 연구하였다. 첫째, FPGA기반 고속 프로세스 정보처리 연산시스템으로 구성된 하드웨어 자원을 이용하여 시스템의 고속화 안정성을 갖추도록 하였다. 둘째, 소프트웨어 자원인 함수곡선 알고리즘과 지능화된 알고리즘을 연계 구현하여 레이더 정보, 분석 시스템에서 필요한 제약요건을 충족할 수 있도록 연구하였다. 기존의 레이더 시스템에서 구현이 불가능 하였던 프레임 단위 영상데이터 분석을 위해 영상캡처와 저장, 레이더 정보 표출 영상을 MPEG4 동영상으로 저장을 할 수 있도록 하였다. 연구의 핵심은 영상 양성 처리 함수곡선 알고리즘을 통해 육안판별에서 관찰 목표물, 특정 감시 대상물체 정보를 강조, 지연표출 및 색상 표현도 할 수 있도록 하였다. 고속 FPGA기반에 탑재된 ARM Processor Support in Pro ASIC3 적용하여 지능화된 알고리을 부분적으로 탑재시켜 시스템의 신뢰성과 효율 제고로 운영자 정보판독 가독성 향상은 물론 최적화된 고해상도 영상, 고속의 정보 분석 및 다양한 정보 표출을 유지할 수 있도록 구현하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.981-988
• /
• 2008

This paper describes a development of automatic measuring device for cylinder liner wear amount. An operator should regularly measure the wear amount of the cylinder liner to prevent the wear amount of the cylinder liner from exceeding the maximum limit specific to the engine type. In previous methods. an operator entered the inside of the cylinder liner on a ladder and measured the amount of wear using a inside micrometer. Such method is unpleasant in severe environments and full of hazards. In addition, in order to enter the cylinder, the piston head had to be detached. requiring much time and money. In order to solve these problems, a new measuring device that consists of two measuring units and a special install jig is developed. The measuring units are installed through the scavenging air port by the install jig and measures the wear amount during 1 revolution of crankshaft. so detaching of the cylinder head and entering inside the cylinder liner are not required.

• 한국주거학회논문집
• /
• 제4권1호
• /
• pp.17-27
• /
• 1993

The Japanese-style houses built in the colonial age have changed through extension or remodeling since Koreans started residence after the liberation of the country. The objective of this study is to find out the influene of the cultural differences of the two nations on the living-style of the two nations from the comparative living-style viewpoint. 26 Japaneses-style houses built in the Ulsan city from the Open-Port year to 1945 were studied with the field survey method. The qualitative and the quantatative analysis were used. The results of this study are as follows. 1) Because of new materials and conveniences, kitchen, bathroom and toilet have changed into standing-type kitchen, bathroom and bathtub of cement and tile, and flush toilet respectively. The indoor toilets were removed and outdoor ones replaced them instead. 2) In the residential space the Koreans have altered the Dadami-room to the Ondol-room becaus of their own heating wywtem, installed glass or wooden doors for the seperation of rooms, enlarged the indoor space throuh removing walls, and developed new uasge of the Dokonoma space. The room of Zasici is most frequently used as the Korean-style Anbang. The wide space called 'living room' or 'maru' near the entrance hall. In conclusion, the guest-oriented Zasiki-style plan of the Japanese-style houses has remodeled into the family oriented Anbang-style plan.

• Steel and Composite Structures
• /
• 제8권5호
• /
• pp.389-402
• /
• 2008

In December 2005, one(A) of the two pre-engineered warehouse buildings in the port of K City of Korea was completely destroyed and the other(B) was seriously damaged to be demolished. Over-loaded snow and unexpected blast of wind were the causes of the accident and destructive behavior was brittle fracture caused by web local buckling and lateral torsional buckling at the flange below rafter. However, the architectural design technology of today based on material non-linear method does not consider the tolerances to solve the problem of such brittle fracture. So, geometric non-linear evaluation which includes initial deformation, width-thickness ratio, web stiffener and unbraced length is required. This study evaluates the structural safety of 4 models in terms of width-thickness ratio and unbraced length using ANSYS 9.0 with parameters such as width-thickness ratio of web, existence/non-existence of stiffener and unbraced length. The purpose of this study is to analyze destructive mechanism of the above-mentioned two warehouse buildings and to provide ways to promote the safety of pre-engineered buildings.