• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.169.1-169.1
• /
• 2005

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.356-361
• /
• 2008

Eigenvalue reduction schemes approximate the lower eigenmodes that represent the global behavior of the structures. In the previous study, we proposed a two-level condensation scheme (TLCS) for the construction of a reduced system. And we have improved previous TLCS with combination of the iterated improved reduced system method (IIRS) to increase accuracy of the higher modes intermediate range. In this study, we apply previous improved TLCS to multi-level sub-structuring scheme. In the first step, the global system is recursively partitioned into a hierarchy of sub-domain. In second step, each uncoupled sub-domain is condensed by the improved TLCS. After assembly process of each reduced sub-eigenvalue problem, eigen-solution is calculated by Lanczos method (ARPACK). Finally, Numerical examples demonstrate performance of proposed method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.213-219
• /
• 2006

Topology optimization problem requires numerous repeated evaluations of objective function and design sensitivity for elements within design domain with various density distributions. The recently proposed two-level condensation scheme(TLCS) is very promising for the construction of reduced system and for an accurate and efficient analysis concerned about eigenvalue and dynamic problems. We used the two-level dynamic condensation scheme for the analysis and sensitivity computation part in the structural topology optimization problem. The results of the topology optimization for the reduced system show the TLCS provides high accuracy and computation efficiency compared to the full scale system within engineering accuracy.

• Korean Management Science Review
• /
• v.10 no.1
• /
• pp.1-22
• /
• 1993

Systemetic classification of a technology is critical to the development of technology strategy. This paper suggests a new technology classification scheme for computer and communication : a two-level scheme. Technology is first classified by its role and function in the upper level which forms a 2 * 2 matrix. The technology is then further classified into the lower level of 3 classes by associations among technology elements. Thus, a new classification scheme of 2 * 2 * 3 matrix is proposed for the computer and communication technology.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1027-1036
• /
• 2018

In this paper a new generalized space vector pulse width modulation scheme is proposed based on the principle of reverse mapping to drive the switches of multilevel inverters. This projected scheme is developed based on the middle vector of the subhexagon which holds the tip of the reference vector, which plays a major role in mapping the reference vector. A new approach is offered to produce middle vector of the subhexagon which holds tip of the reference vector in the multilevel space vector plane. By using middle vector of the subhexagon, reference vector is linked towards the inner two level sub-hexagon. Then switching vectors, switching sequence and dwell times corresponding to a particular sector of a two-level inverter are determined. After that, by using the two level stage findings, the switching vectors related to exact position of the reference vector are directly generated based on principle of the reverse mapping approach and do not need to be found at n level stage. In the reverse mapping principle, the middle vector of subhexagon is added to the formerly found two level switching vectors. The proposed generalized algorithm is efficient and it can be applied to an inverter of any level. In this paper, the proposed scheme is explained for a five-level inverter and the performance is analyzed for five level and three level inverters through MATLAB. The simulation results are validated by implementing the propose scheme on a V/f controlled three-level inverter fed induction motor using dSPACE control desk.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1162-1170
• /
• 2019

Finite-control-set model predictive control (FCS-MPC) is a promising control scheme for two-level voltage-source inverters (TL-VSIs). However, two main issues arise in the classical FCS-MPC method: an exponentially-increasing computational time and a low steady-state performance. To solve these two issues, a novel FCS-MPC method has been proposed for n-phase TL-VSIs in this paper. The basic idea of the proposed method is to carry out the FCS-MPC scheme of TL-VSIs for one leg by one leg, like a "pipeline". Based on this idea, the calculations are reduced from exponential time to linear time and its current waveforms are improved by applying more switching states per sampling period. The cases of three-phase and five-phase TL-VSIs were tested to verify the effectiveness of proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1229-1232
• /
• 1996

This paper proposes the passive redundancy algorithm of multi-controller structure applicable to the steam generator level control system in the low power operating range. In the passive redundancy scheme of multi-controller structure, two suitable controllers exist if the plant is strongly stabilizable. One of the two controllers can be selected arbitrarily only if it is stable. In particular, this paper shows that the passive redundancy scheme can be efficiently used with PID and GPC control algorithms through simulation studies on the control of the steam generator.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.175-185
• /
• 2020

Inter-cell interference (ICI) is a major problem in heterogeneous networks, such as two-tier femtocell (FC) networks, because it leads to poor cell-edge throughput and system capacity. Dynamic ICI coordination (ICIC) schemes, which do not require prior frequency planning, must be employed for interference avoidance in such networks. In contrast to existing dynamic ICIC schemes that focus on homogeneous network scenarios, we propose a novel semi-distributed dynamic ICIC scheme to mitigate interference in heterogeneous network scenarios. With the goal of maximizing the utility of individual users, two separate algorithms, namely the FC base station (FBS)-level algorithm and FC management system (FMS)-level algorithm, are employed to restrict resource usage by dominant interference-creating cells. The distributed functionality of the FBS-level algorithm and low computational complexity of the FMS-level algorithm are the main advantages of the proposed scheme. Simulation results demonstrate improvement in cell-edge performance with no impact on system capacity or user fairness, which confirms the effectiveness of the proposed scheme compared to static and semi-static ICIC schemes.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.225-228
• /
• 1988

A new transmission scheme is presented for transmitting motion video at very low data rates. In this scheme, two-level cartoons are extracted from gray-level images, and their interframe differences are coded using 2D run-length coding. Experimental results show that the proposed scheme yields compression ratio as high as 216:1.

• Journal of Internet Computing and Services
• /
• v.2 no.1
• /
• pp.23-30
• /
• 2001

ILP processors require an accurate branch prediction scheme to achieve higher performance. Two-Level branch predictor has been known to achieve high prediction accuracy. But, when a branch accesses a PHT entry that was, previously updated by other branch, Two-level predictor may cause interferences. Negative interferences among all interferences have a negative effect on performance, since they can cause branch mispredictions. Agree predictor achieve high prediction accuracy by converting negative interferences to positive interferences by adding bias bits to BTB, but negative interferences may occur when bias bit is set incorrectly. This paper presents a new dynamic branch predictor which reduces negative interferences. In the proposed predictor, we attach hit bits to entries in BTB to change bias bit dynamically during the execution time, h a result the proposed scheme improve the accuracy of prediction by reducing negative Interferences effectively, To illustrate the effect of the proposed scheme, we evaluate the performance of this scheme using SPEC92int benchmarks, The results show that the proposed scheme can outperform traditional branch predictors.