• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.33-46
• /
• 2008

A two-lane highway has a high rate of head-on collisions, sideswipe collisions, crashes with an fixed object. This study was to analyze the weakness of a cross section and a horizontal curve in a two-lane highway and find countermeasures to improve the traffic operations and safety. This study evaluated the effectiveness of widening, curve flattening and superelevation, verified it with a case study and assessed the economical efficiency. This study selected the difference between tangent section operating speeds and curve section operating speeds as an evaluation index of horizontal curve section in a two-lane highway. The results indicated that curve flattening is the best way to improve the traffic safety in a two-lane highway. This study has implication that it provides the quantitative effects of curve flattening. Also directions for future study were discussed.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.87-96
• /
• 1999

It is very important to analyze the capacity of basic freeway section in terms of planning, design, and operation of roads. Capacity, in Korean Highway Capacity Manual was Published in 1992, had been determined by data collected in only 4-lane freeway. But, Korea is continuously planning and constructing multi-lane roads for increasing traffic demand. For this reason, it is necessary to determine the capacity for multi-lane freeways. This study goals are two-fold the determination of lane capacity for 8-lane freeway; and the development of methodology determining total capacity using lane friction factor This study utilized the data collected by loop detectors at a station of FTMS in Kyungbu expressway. For determining capacities, this study analyzed maximum flow rate in various aspects such as collecting period, each lane, and total lane in one-way. In addition, this study evaluated the breakdown in traffic flow relations in order to find out interrelation of breakdown among lanes. Through this analysis, this study determined lane friction factors, critical speed, and critical density. Finally, this study expressed a new methodology of capacity analysis for multi-lane freeways using some findings from this analysis.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.26 no.4
• /
• pp.185-223
• /
• 2022

The classical equation of Jonathan Homer Lane and Robert Emden, a nonlinear second-order ordinary differential equation, models the isothermal spherical clouded gases under the influence of the mutual attractive interaction between the gases' molecules. In this paper, the Adomian decomposition method (ADM) is presented to obtain highly accurate and reliable analytical solutions of a class of generalised Lane-Emden equations with strong nonlinearities. The nonlinear term f(y(x)) of the proposed problem is given by the integer powers of a continuous real-valued function h(y(x)), that is, f(y(x)) = h^m(y(x)), for integer m ≥ 0, real x > 0. In the end, numerical comparisons are presented between the analytical results obtained using the ADM and numerical solutions using the eighth-order nested second derivative two-step Runge-Kutta method (NSDTSRKM) to illustrate the reliability, accuracy, effectiveness and convenience of the proposed methods. The special cases h(y) = sin y(x), cos y(x); h(y) = sinh y(x), cosh y(x) are considered explicitly using both methods. Interestingly, in each of these methods, a unified result is presented for an integer power of any continuous real-valued function - compared with the case by case computations for the nonlinear functions f(y). The results presented in this paper are a generalisation of several published results. Several examples are given to illustrate the proposed methods. Tables of expansion coefficients of the series solutions of some special Lane-Emden type equations are presented. Comparisons of the two results indicate that both methods are reliably and accurately efficient in solving a class of singular strongly nonlinear ordinary differential equations.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.93-103
• /
• 2015

PURPOSES : The purpose of this study is to present a linear programing optimization model for the design of lane-based lane-uses and signal timings for an isolated intersection. METHODS: For the optimization model, a set of constraints for lane-uses and signal settings are identified to ensure feasibility and safety of traffic flow. Three types of objective functions are introduced for optimizing lane-uses and signal operation, including 1) flow ratio minimization of a dual-ring signal control system, 2) cycle length minimization, and 3) capacity maximization. RESULTS : The three types of model were evaluated in terms of minimizing delay time. From the experimental results, the flow ratio minimization model proved to be more effective in reducing delay time than cycle length minimization and capacity maximization models and provided reasonable cycle lengths located between those of other two models. CONCLUSIONS : It was concluded that the flow ratio minimization objective function is the proper one to implement for lane-uses and signal settings optimization to reduce delay time for signalized intersections.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2473-2481
• /
• 2013

The two characteristics of two-lane-and-two-way traffic flow are platoon and overtaking triggered by low-speed vehicle. It is crucial to develop a robust model which simultaneously generates the behaviors of platoon by low-speed vehicle and overtaking using opposite lane. Hence, a microscopic two-lane and two-way vehicle model was introduced (B. Yoon, 2011), which is based on CA (Cellular Automata) which is one of discrete time-space models, in Korea. While the model very reasonably explains the behaviour of overtaking low-speed vehicle in stable traffic flow below critical density, it has shortcomings to the overtaking process in unstable traffic flow above the critical density. Therefore, the objective of this study is to develope a vehicle model to more realistically explain overtaking process in unstable traffic flow state based on the model developed in the previous study. The experimental results revealed that the car-following model robustly generates the various macroscopic relationships of traffic flow generating stop-and-go traffic flow and the overtaking model reasonably explains the behaviors of overtaking under the conditions of both opposite traffic flow and stochastic parameter to consider overtaking in unstable traffic flow state. The vehicle model presented in this study can be expected to be utilized for the analysis of two-lane-and-two-way traffic flows more realistically than before.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.133-141
• /
• 2015

PURPOSES : This study dealt with traffic accidents occurring within roundabouts. The objective of this study was to analyze safety effect by introduction of roundabouts. METHODS : In pursuing the above, traffic accident data on roundabouts are collected and compared. For the analysis, collected data were separated as all intersection points, turning lane accident, approach lane accident by geometric design. RESULTS : Through the study results, it was found that the total accidents decreased by 55 accidents/2 year with safety effect of roundabouts. Also the result shows that accidents by point of two-lane roundabout at turning lane(0.26) and approach lane(0.27) is risky than total accidents by point(0.09). Moreover, accidents by point shows high value as diameter of a roundabout is bigger. CONCLUSIONS : When a roundabout is introduced at the intersections there are safety effects by reduction of traffic accidents.

• Journal of Information Technology Applications and Management
• /
• v.11 no.4
• /
• pp.169-179
• /
• 2004

There are many inductive loop detectors under the highways in Korea. Among the other detectors, some are image detectors. Almost all image detectors are focused one or two lane of the road and are measuring traffic information. This paper proposes to an algorithm for detecting traffic information automatically from CCTV camera images installed on the highway. The information which is counted in one lane or two contains some critical errors by occlusion frequently in case of passing larger vehicles. In this paper, we use a tracking algorithm in which the detection area include all lanes, then the traffic informations are collected from the vehicles individually using difference images in this detection area. This tracking algorithm is better than lane by lane detecting algorithm. The experiment have been conducted two different real road scenes for 20 minutes. For the experiments, the images are provided with CCTV camera which was installed at Kiheung Interchange upstream of Kyongbu highway, and video recording images at Chungkye Tunnel. For image processing, images captured by frame-grabber board 30 frames per second, 640${\times}$480 pixels resolution and 256 gray-levels to reduce the total amount of data to be Interpreted.

• Journal of Korean Society of Transportation
• /
• v.18 no.3
• /
• pp.101-112
• /
• 2000

The Purpose of this Paper was to revise the method of USHCM and to establish new method for level of service analysis on two-lane rural highways. For this Purpose, total delay rate was selected as new MOE for level of service, replacing the present Percent time delay. This result showed that total delay rate was more effective for considering the effects of traffic flows, auxiliary lane, and vertical tirade. The application of total delay rate could resolve the Problems in the USHCM method, such as too wide ranges for level of service D and E, and the use of different Procedures for level of service analysis of general terrain segment and specific grade Procedures. The research results are as follows First, a new method for level of service analysis on two-lane rural highways was developed using the total delay rate. Second, a new classification for level of service was developed and a consistent method applicable for general terrain segment and specific tirade Procedures was developed. Third, the desired speed on two-lane rural highways was determined as 85km/h.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.49-56
• /
• 2014

PURPOSES : This study was done to model the headway distribution of rural two lane roads. METHODS : Time headway data for the various level of traffic volumes was measured in twelve sites. Based on the time headway data, existing seven mathematical models were evaluated and selected by comparing graphically the measured and theoretical distributions and conducting the Chi-square test. RESULTS : The results show that both the Schul model and Composite Model were the most appropriate models of the models. Based on the measured time-headway distributions, this study proposed a new headway distribution model by the shift of the Schul model. CONCLUSIONS : The shifted Schul model has the ability to describe time headway distirbutons for random, intermediate, and constant-headway states.