• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.7-10
• /
• 2000

This paper focuses on the development of speech enhancement techniques for hands-free audio terminals, including two major problems : noise cancellation and acoustic echo cancellation. The objective is to find a joint structure to get a near-end speech signal with minimum distortion and low levels of echo and noise. To solve the two problems, a new promising technique is studied and tested in computer simulation conditions.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.12
• /
• pp.1-11
• /
• 1991

Multi rate circuit switching ISDN which assumes a star topology consisting of LANs(local area networks) interconnected through a backbone MAN (metropolitan area network) is considered. The stations are classified into two categories data and voice stations they are characterized by different arrival rate and session-length (holding time) statistics. We first model the data and voice terminals as finite-source stations and derive analytically exact expressions for the end-to-end blocking probabilities. For more exact evaluation, these probabilities are calculated in terms of three components:circuit blocking probability, destination busy probability and concurrent busy probability. For large size systems, we develop an develop an iterative algorithm that provides a computationally efficient and fast method for the calculation of the end-to-end blocking probabilities.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.141-150
• /
• 1997

In this paepr, we propose an intelligent double talk detector that can enhance the performance of the acoustic echo cancellation system. The conventional double talk detection methods often misunderstand the echo path changes as double talk. Although there exist several detection methods that can distinguish the echo path changes from the double-talks, they show poor tracking performance because of the excessive decision delay for the discrimination and can only be used after the adaptive digital filter converges. A new and more effective ditetion algorithm has been proposed, where the detection mechanism is performed by observing the change rate of the reflection coefficients of the two lattice predictors that re placed on the near-end and far-end terminals. The excellence of the proposed method is verified by extensive computer simulations using real speech signals.

• Industrial Engineering and Management Systems
• /
• v.11 no.3
• /
• pp.276-287
• /
• 2012

Determining storage locations of containers is an important issue for efficient operation of container terminals. This study assumes a storage yard with a horizontal layout in which blocks are laid out in parallel to the quay and trucks enter at the side of a block to deliver (receive) a container to (from) the yard crane. Various storage rules for determining storage locations of containers are introduced. Simulation studies are conducted for evaluating various rules. The following guidelines are derived from the result of our simulation study: when designing a block, consider a block configuration in which the longest gantry and the longest trolley travel times of rail-mounted gantry cranes (RMGCs) are similar; do not restrict the types of containers that can be stored in a storage area; if different roles are to be assigned to different storage areas, one possible way is to divide a bay into two areas so that some rows in the bay are allocated to inbound containers while the other rows in the same bay are allocated to outbound containers; reserve the space in bay unit for a high productivity of RMGCs but reserve the space in stack unit when the storage space is not enough; when the storage space is not sufficient, allocate storage location in a way of starting from the end and ending at the middle of a block; for reducing the travel distance of internal trucks, provide a higher priority to a block nearer to the berthing position of the corresponding vessel.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.641-652
• /
• 2017

This paper proposes a cost-effective topology to drive a three-phase open-end load based on a five-leg indirect matrix converter (IMC) and a space vector modulation (SVM) method. By sharing an inverter leg with two load terminals, the proposed topology can reduce the number of power switches when compared to topologies based on a direct matrix converter or a six-leg IMC. The new SVM method uses only the active vectors that do not produce common-mode voltage (CMV), which results in zero CMV across the load phase and significantly reduces the peak value of the CMV at the load terminal. Furthermore, the proposed drive system can increase the voltage transfer ratio up to 1.5 and provide a superior performance in terms of an output line-to-line voltage with a three-level pulse-width modulation waveform. Simulation and experimental results are given to verify the effectiveness of the proposed topology and the new SVM method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.47-52
• /
• 2016

Fault location identification in the transmission line is an essential part of quick service restoration for maintaining a stable in power system. The application of digital schemes to protection IEDs has led to the development of digital fault locators. Normally, the impedance measurement had been used to for the location detection of transmission line faults. It is well known that the most accurate fault location scheme uses two-ended measurements. This paper deals with the complete design of a fault locator using GPS time-synchronized phasor for transmission line fault detection. The fault location algorithm uses the transmitted relaying signals from the two-ended terminal. The fault locator hardware consists of a Main Processor Unit, Analog Digital Processor Unit, Signal Interface Unit, and Power module. In this paper, sample real-time test cases using COMTRADE format of Omicron apparatus are included. We can see that the implemented fault locator identified all the test faults.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.47-56
• /
• 2003

According to rapidly developed mobile terminals and network in the play environment for multimedia presentation, different end-to-end QoS situations appear. Then the generation of transcoding path algorithm was reviewed to transcode a source'data satisfying the needed QoS from a destination and play it considering given transcoders and network. This method used only workload as a parameter although two parameters, workload and throughput, were needed to process multimedia stream in a transcoder, Therefore generated transcoding path with this method had additional calculation to check playability whether it was safisfed the QoS of a destination or not. To solve the problem this paper suggests T algorithm with evaluation function using isochronous property that is needed for multimedia stream to arrive a destination. That means, most playable path is selected with heuristic search based isochronous property between many transcoding paths. Using the suggested algorithm, a transcoding path can be generated faster to play the multimedia data with different end-to-end QoS in real-time transmission.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.10
• /
• pp.75-89
• /
• 2020

Purpose: The container terminal is an area that plays an important role in the country's import and export. As the volume of containers increased worldwide, competition between terminals became fiercer, and increasing the productivity of terminals became more important. Re-handling is a serious obstacle that lowers the productivity of terminal. There are two ways to reduce re-handling in the terminal yard. The first method is to load containers in terminal yards using effective carry-in algorithms that reduce re-handling. The second method is to carry out effective remarshalling. In this paper, the performance of various carry-in algorithms and various remarshalling algorithms are reviewed. Next, we try to find the most effective combination of carry-in algorithm and remarshalling algorithm. Research design, data and methodology: In this paper, we analyze the performance of the four carry-in algorithms, AP, MDF, LVF, RP and the four remarshalling algorithms, ASI, ASI+, ASO, ASO+. And after making all the combinations of carry-in algorithms and remarshalling algorithms, we compare their performance to find the best combination. To that end, many experiments are conducted with eight types of 100 bays through simulation. Results: The results of experiments showed that AP was effective among the carry-in algorithms and ASO+ was effective among remarshalling algorithms. In the case of the LVF algorithm, the effect of carrying in was bad, but it was found to be effective in finding remarshalling solution. And we could see that ASI+ and ASO+, algorithms that carry out remarshalling even if they fail to find remarshalling solution, are also more effective than ASI and ASO. And among the combinations of carry-in algorithms and remarshalling algorithms, we could see that the combination of AP algorithm and ASO+ algorithm was the most effective combination. Conclusion: We compared the performance of the carry-in algorithms and the remarshalling algorithms and the performance of their combination. Since the performance of the container yard has a significant effect on the performance of the entire container terminal, it is believed that the results of this experiment will be effective in improving the performance of the container terminal when carrying-in or when remarshalling.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.4
• /
• pp.178-182
• /
• 2006

Five model coils of 6.6 kV motor were manufactured with several defects. These stator coils have artificial defects such as void of groundwall insulation, removal of semi-conductive coating and damage of strand insulation. Epoxy-mica coupler(80 pF) was connected to five model coil terminals. The voltage applied to the coils was 3.81 kV, 4.76 kV, 6.0 kV and 6.6 kV, respectively. Partial discharge(PD) tests performed in the laboratory and shield room. Digital PD detector(PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in pC were measured with PDD. PD patterns of model coils were indicated the internal and slot discharges. PD patterns are consistent with the result of measurement using PDD and TGA instruments. AC breakdown test was performed on five model coils in order to confirm the result of PD measurements. All the failures were located in a line-end coil at the exit from the core slot.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.55-63
• /
• 2018

In this paper, we measured the propagation path loss by a ground to air flight communication test at UHF band and analyzed the results. The ground receiving terminal was located at 1,100m above sea level in Cheju Island and the airborne transmit terminal flew at an altitude of 3.5km from 150 to 220km from the ground terminal. In this case, the ground terminal and the airborne terminal are on the Line of Sight. Therefore loss in this communications environment can be predicted based on Free Space Loss. However, in this test, the sea level exists between two terminals, and due to the very small angle of incidence on the reflecting surface due to the long-range communication environment, it is not possible to accurately predict the loss of free space only. Therefore, considering that there are no surrounding obstacles and that a line of sight is secured between the end of two terminals, we applied a plane earth reflection model and a spherical earth reflection model to estimate the propagation path loss and compared with the actual test results. As a result of the comparison, the predicted propagation path loss by a spherical earth reflection model were quite similar to the actual test values.