• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.266-274
• /
• 2005

We have designed photonic crystal based bandpass filters whose characteristics are suitable for WDM communication system. The filters consist of coupled point defect resonators in two-dimensional photonic crystal. The frequency response of coupled resonators has been analyzed by the coupling of modes in time, from which the design parameters for the coupled resonator filters have been extracted. For the appropriate choice of the design parameters, each resonator is treated as a lumped L-C resonance circuit, and from the analogy between the equivalent circuit and the standard L-C filter circuits, the design parameters are simply determined from the table for general filter circuit design. Based on the determined design parameters, a photonic crystal based filter has been designed and its performance has been calculated using the finite-difference time-domain method. The designed filter shows a pass band of 50GHz and 0.5 dB in-band ripple, which is suitable for typical WDM communication systems with 100GHz channel spacing.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.6
• /
• pp.1081-1090
• /
• 2010

Most nations including Korean government make a great endeavor to realize low-carbon and green-growth world. We also work hard to expand bicycle facilities and bicycle road in order to increase bicycle transportation rate. Nowadays number of cyclists is increasing but fortunately, bicycle accidents also increase rapidly. Most data of bicycle accidents published by National Police Agency annually are represented as frequencies in two dimensional contingency tables. In this work, risk rates and characteristics of bicycle accidents are analyzed by using concepts of the probability and conditional probability. Especially with numbers of estimated cyclists and registered cars, risk rates of various kinds of bicycle accidents are obtained. Under the assumption of the conditional independence, probability of bicycle accident occurred at realistic situations could be estimated. Furthermore we discuss to reduce bicycle accidents with these results obtained in this work.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1681-1688
• /
• 2017

In this paper, we implemented a high-speed signal processing hardware system for Color Line Scan Camera using FPGA and Nor-Flash. The existing hardware system mainly processed by high-speed DSP based on software and it was a method of detecting defects mainly by RGB individual logic, however we suggested defect detection hardware using RGB-HSL hardware converter, FIFO, HSL Full-Color Defect Decoder and Image Frame Buffer. The defect detection hardware is composed of hardware look-up table in converting RGB to HSL and 4K HSL Full-Color Defect Decoder with high resolution. In addition, we included an image frame for comprehensive image processing based on two dimensional image by line data accumulation instead of local image processing based on line data. As a result, we can apply the implemented system to the grain sorting machine for the sorting of peanuts effectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.245-257
• /
• 2012

As one of the most challenging tasks in designing the Internet routers, packet classification is required to achieve the wire-speed processing for every incoming packet. Packet classification algorithm which applies binary search on trie levels to the area-based quad-trie is an efficient algorithm. However, it has a problem of unnecessary access to a hash table, even when there is no node in the corresponding level of the trie. In order to avoid the unnecessary off-chip memory access, we proposed an algorithm using Bloom filters along with the binary search on levels to multiple disjoint tries. For ACL, FW, IPC sets with about 1000, 5000, and 10000 rules, performance evaluation result shows that the search performance is improved by 21 to 33 percent by adding Bloom filters.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.63-70
• /
• 1990

The aim of this study has been to investigate the growth of the pharynx and sexual differences in the lateral cephalograms of Korean children. The material includes 173 cepalograms from two groups composed of 51 males aged 12.0 years and 39 females aged 12.2 years in group 2, and 45 males aged 7.4 years and 39 females aged 7.5 year in group 1, respectively. In order to study and measure the pharyngeal area the following skeletal landmarks were selected: S, N, A, Ptm, B, H, H', M, S-N, FH and CV, and the angle CV-FH was measured to provide a factor for correction of error resulting from improper head positioning of subjects, especially in relative positions of A and H, while radiography. For each variable the statistically treated data have been presented in the table Ⅱ, Ⅲ, Ⅳ. The main results are presented as follows: 1. In general, the measurements of male were larger than those of female in antero-posterior dimension of pharyngeal cavity, but all variables did not show significant sexual differences in both groups when evaluated statistically. 2. All of the measurements were larger in male than in female in vertical dimensions of pharyngeal cavity in group 2, and there were statistical significances of sexual differences in the variables except M-H', but all variables did not show significant sexual differences in group 1 when evaluated statistically. 3. The dimensional increase of the pharynx by the growth in the vertical dimensions was shown to be greater than in the antero-posterior dimensions in the both sexes.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.1047-1053
• /
• 2015

A time-domain simulation tool to predict the dynamic power output of wind turbines in an offshore wind farm was developed in this study. A wind turbine model consisting of first or second order transfer functions of various wind turbine elements was combined with the Ainslie's eddy viscosity wake model to construct the simulation tool. The wind turbine model also includes an aerodynamic model that is a look up table of power and thrust coefficients with respect to the tip speed ratio and pitch angle of the wind turbine obtained by a commercial multi-body dynamics simulation tool. The wake model includes algorithms of superposition of multiple wakes and propagation based on Taylor's frozen turbulence assumption. Torque and pitch control algorithms were implemented in the simulation tool to perform max-Cp and power regulation control of the wind turbines. The simulation tool calculates wind speeds in the two-dimensional domain of the wind farm at the hub height of the wind turbines and yields power outputs from individual wind turbines. The NREL 5MW reference wind turbine was targeted as a wind turbine to obtain parameters for the simulation. To validate the simulation tool, a Danish offshore wind farm with 80 wind turbines was modelled and used to predict the power from the wind farm. A comparison of the prediction with the measured values available in literature showed that the results from the simulation program were fairly close to the measured results in literature except when the wind turbines are congruent with the wind direction.

• Radiation Oncology Journal
• /
• v.21 no.2
• /
• pp.174-181
• /
• 2003

Purpose: The target volume for the three field technique in breast cancer include the breast tangential and supraclavicular areas. The techniques rotating the gantry and couch angles, to match these two areas, will geometrically produce mismatching of the posterior edge between the medial and lateral tangential beams. This mismatch was confirmed by film dosimetry and three-dimensional computer planning. The correction methods of this mismatching were studied in this article. Materials and Methods: After the supraclavicular field was simulated using a half beam block and the medial and lateral tangential fields, by the rotation of the couch and gantry, we compared the following two methods to correct the mismatch. The first method was the rotation of coillmator until a line drawn on the posterior edge of tangential beams before the rotation of couch aligned the line drawn on the posterior edge after the rotation. The second method was the rotation of collimator according to the formula developed by the author as follows; Co=$2sin^{-1}${$sin\{theta}\{cdot}sin(C/2)$} (Co: collimator angle, $\theta$: angle between tangential beam and table, C: couch angle) Results: The film dosimetry showed the mismatching of posterior edges of the medial and lateral tangential fields prior to the rotation of collimator, while the posterior edges matched well after the rotation of collimator according to the formula. The three-dimensional computer plan also showed that the posterior edges matched well after the rotation of collimator accordingly. The DVH of the ipsilateral lung with the proper rotation of collimator angle was better than that without the rotation of collimator angle. Conclusion: The mismatching of the posterior edges of the medial and lateral tangential fields can be recognized on the three fileld technique in breast irradiation when the gantry and couch are simultaneously rotated and can be corrected with the proper rotation of the collimator angle. The radiation dose to the ipsilateral lung could be lowered with this technique.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6267-6272
• /
• 2015

Background: Extra nodal lymphoma (ENL) constitutes about 33 % of all non-Hodgkin's lymphoma. 18-28% develops in the head and neck region. A multimodality treatment with multi-agent chemotherapy (CT) and radiotherapy (RT) is considered optimum. Materials and Methods: We retrieved the treatment charts of patients of HNENL treated in our institute from 2001-2012. The charts were reviewed and the demographic, treatment details and outcome of HNENL patients were retrieved using predesigned pro-forma. Results: We retrieved data of 75consecutive patients HNENL. Median age was 47years (Range: 8-76 years). Of the 75 patients 51 were male and 24 were female. 55patients were evaluable. The patient and tumor characteristics are summarized in Table 1. All patients were staged comprehensively with contrast enhanced computed tomography of head, neck, thorax, abdomen, pelvis and bone marrow aspiration and biopsy 66 patients received a combination multi-agent CT with CHOP being the commonest regimen. 42 patients received 4 or lesser number of cycles of chemotherapy whereas 24received more than 4 cycles chemotherapy. Post radiotherapy, 41 out of 42 patients had a complete response at 3 months. Only 21patients had a complete response after chemotherapy. All patients received radiation (mostly involved field radiation) as a part of the treatment. The median radiation dose was 45 Gray (Range: 36 Gray-50 Gray). The radiation was planned by 2D fluoro simulation based technique in 37cases and by 3 Dimensional conformal radiation therapy (3DCRT) in 36 cases. Two patients were planned by the intensity modulated radiation therapy (IMRT) technique. IMRT was planned for one thyroid and one nasal cavity primary. 5 patients experienced relapse after a median follow up of 19 months. The median survival was not reached. The estimated two and three year survival were 92.9% (95%CI- 68.6- 95.35) and 88% (95%CI- 60.82 - 92.66) respectively. Univariate analysis revealed higher stage and poorer baseline performance status to be significantly associated with worse progression free survival. 5 patients progressed (relapse or primary disease progression) after treatment. Of the 5 patients, two patients were primary orbital NHL, two patients had NHL nasal cavity and one was NHL thyroid. Conclusions: Combined modality treatment in HNENL confers excellent disease control with acceptable side effects.

• Journal of The Korean Association For Science Education
• /
• v.35 no.3
• /
• pp.343-352
• /
• 2015

This study is to discover the diverse issues related to Self-Directed Learning Screening (SDLS) and draw implications by analyzing its critical points. Using content analysis and interviews with admission officers, tentative issues were finalized and reviewed by researchers and educators. A Survey was developed based on the 96 issues after having evidence of content validity using the Delphi method. To conduct survey, e-mails were sent to admissions officers in twenty science specialized high schools. They were asked to response to questions about perceptions of critical issues and if there are any issues in their schools. Using mean scores of two factors based on its critical issues and frequencies, a two-dimensional classification table for each type was presented. Four critical issues for each type were discovered. The first type indicates minor issues that include 28 items that were less than the overall mean scores in terms of critical issues and its frequencies. The second type indicates tentative issues that include 29 items that were greater than the mean score in critical issues but less in its frequencies. The third type indicates general issues that include 17 items that were less than the mean score in critical issues but greater in its frequencies. The last type indicates critical issues that include 22 items that were greater than the mean scores in two factors. The discovered results of critical issues and its types in this study can be considered a core part of the screening process in schools, especially, critical issues should play an important role in the process of admission screening planning.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.275-291
• /
• 2002

Of various factors indicated for effective use of straight wire appliances, there was a great lack of studies both domestic and international about the curvatures of tooth crowns. This study was performed to investigate the labio/buccal clinical crown curvatures of Korean permanent teeth. For this study, three-dimensional laser scanning was performed on 36 dental casts with normal anatomic structures. Andrews plane and Facial axis of clinical crown (FACC) were designated as horizontal and vertical reference planes respectively. 2 or 3 lines, 1mm apart, were drawn superior, inferior, left and right of these reference planes. A three-dimensional coordinate table was made for points formed by crossing these lines, and averages of each coordinate point on the 36 dental casts were obtained. The curvature equation was made using three-dimensional coordinate points (x,y,z) and by this curvature equation, the curve ratio of each tooth was obtained. Curve ratio changes of each section of teeth were calculated by curve ratios of simplified curves. These two dimensional curves were simplified horizontally and vertically Conclusions for this study are as follows. 1. The basic data of labial and buccal clinical crown curvatures were obtained about Korean permanent teeth. 2. No significant difference was found between male and females. 3. Individual tooth characteristics 1) In maxillary central incisors, the difference in the curve ratio between the gingival and incisal sides was greater than for the other teeth. And the gingival side showed a greater curve ratio. 2) Maxillary canines showed more curvatures in the mesio-occlusal surface than the other surfaces. 3) In maxillary $1^{st}$ premolars, more curvatures were found in mesio-occlusal and disto-gingival surface, thus showing a twisted crown surface, but in maxillary $2^{nd}$ premolars, the crown curvatures of mesial and distal ends became parallel to each other. 4) No significant difference in crown curvatures was found between mandibular central and lateral incisors. 5) Occluso-gingival curvatures of mandibular$2^{nd}$ premolar turned out to be more rounded than mandibular $1^{st}$ premolars or maxillary $2^{nd}$ premolars. From the above conclusions, it can be deduced that the same bracket bases can be used for mandibular central and lateral incisors. But for maxillary $1^{st}\;and\;2^{nd}$ premolars and for mandibular $1^{st}\;and\;2^{nd}$ premolars, because crown curvatures showed significant differences, when making bracket bases there is ample reason to make bracket base curves differently for each type of tooth.