• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.130-136
• /
• 2013

This paper presents the magnetic equivalent circuit analysis of a double-excited, two-degree-of-freedom (DOF) motor. The double-excited, 2-DOF motor is a laminated structure, making it easy to manufacture and giving it simple operating principles. We explain the structure of the 2-DOF motor and analyze the static characteristics using a magnetic equivalent circuit (MEC) to reduce analysis time. The feasibility of MEC analysis was confirmed by experimental results of the tilting, panning motion. We also confirmed the occurrence of holding torque in every motion.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권3호
• /
• pp.97-105
• /
• 1997

위성통신설비를 위한 인공위성 추적 안테나 제어 시스템은 바람에 의한 외란과 베어링 공기역학적 마찰로 인한 전달함수의 파라메타 변동이 존재하므로, 이러한 시스템의 불확실성에도 불구하고 만족스러운 명령추종성을 가지는 강인한 제어 시스템의 설계가 요구된다. 본 연구에서는 $\mu$-설계법을 사용하여 피드백 \ulcorner 포워드 제어기를 각각 독립적으로 설계할 수 있는 강인한 성능을 가지는 2자유도계의 설계법을 제시한다. 또한, 제시된 설계법을 위성추적 안테나 제어 시스템에 제어 시스템에 적용되고 컴퓨터 시뮬레이션을 통하여 1자유도계와 성능을 비교 고찰하여 그 유용성을 확인한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.108.5-108
• /
• 2002

Recently, the more advanced control technologies are required to deal with the fast and accurate motion in manipulators. For these requirements, many manipulator control methods have been developed such as a computed torque method. This paper proposes a design method, a two-degrees-of-freedom internal model control (TDOF IMC), of the manipulator position control based on combination of the one-degree-of-freedom internal model control (ODOF IMC) system and the disturbance observer. The proposed control scheme is implemented for the position control, which leads the slave manipulator to the desired location by the master arm. The experimental results are presented and discussed through the imp...

• 융합신호처리학회논문지
• /
• 제12권1호
• /
• pp.56-61
• /
• 2011

많은 제어기법들이 제어계의 제어성능을 개선하기 위해 제안되고 있다. 제어계에서 제어에 대한 자유도는 독립적으로 조정할 수 있는 페루프 전달함수의 수로 결정된다. 목표치 추종 및 외란억제에 2자유도 제어기법이 많이 이용되고 있다. 본 논문에서는 PID 제어기를 2자유도 제어기법을 이용하여 제어계를 설계할 수 있는 정규화법을 제안하였다. 제안한 설계법은 제어대상의 전달함수의 계수값을 이용하여 계의 전달함수를 정규화 하고, 제어기의 계수들이 결정되도록 하였다. 이 방법으로 설계된 제어계를 이용하여 2자유도 제어계를 구성하였고, 시뮬레이션 결과를 통하여 제안한 알고리즘의 유효성을 확인 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.754-756
• /
• 1998

In this paper the control methods for the synchronous generator is designed based on the two-degree-of-freedom (TDOF) control methods which can safisty the command following property and Robust control property at the same time. The power systems is reduced to one machine infinite-bus system. Robust stability of the proposed power system stabilizer is checked through the simulation considering the circumstance which can happen in real situation.

• 로봇학회논문지
• /
• 제13권2호
• /
• pp.92-96
• /
• 2018

In this paper, a soft robotic arm which can prevent impact injury during human-robot interaction is introduced. Two degrees of freedom joint are required to realize free movement of the robotic arm. A robotic joint concept with a single degree of freedom is presented using simple inflatable elements, and then extended to form a robotic joint with two degrees of freedom joint using similar manufacturing methods. The robotic joint with a single degree of freedom has a joint angle of $0^{\circ}$ bending angle when both chamber are inflated at equal pressures and maximum bending angles of $28.4^{\circ}$ and $27.1^{\circ}$ when a single chamber if inflated. The robotic joint with two degrees of freedom also has a bending angle of $0^{\circ}$ in both direction when all three chambers are inflated at equal pressures. When either one or two chambers were pressurized, the robotic joint performed bending towards the uninflated chambers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.468-471
• /
• 1994

This paper presents the digital implementation of an optimal and robust VSS controller with sliding observer. Firstly, a discrete-time VSS control law which enables the system state to move into a sliding sector where the closed-loop system is stable is designed. Then optimal control theory is used to design an optimal sliding sector. Secondly, a sliding observer which provide robust state estimation against model-plant mismatches due to parameter uncertainties is designed for the sampled-data multivariable systems. Finally, modified sliding observer which effectively reduce chattering of state variables in state estimation was proposed. The proposed scheme was applied 10 a two degree of freedom inverted pendulum with passive joint to verify robust motion control. Computer simulation results confirm the viability of the proposed observer-based controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.256-261
• /
• 2004

This paper presents a simple two-degree of freedom PID tuning table based on the CDM design method. The structure of the control system will be composed of plant, P or PI or PID controller and a pre-filter. The finalized formula can be used based on the experimental test of the plant in the same manner as the Ziegler-Nichols' second method. That is; users just need to find the critical gain and critical period experimentally and the parameters of the P, PI or PID controller with the pre-filter can be obtained by substituting the values of critical gain and critical period in the tuning table. The simulation results of the control systems utilizing the proposed controllers compared with those using the Ziegler-Nichols' second method will also be demonstrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.304-306
• /
• 1993

In this paper, the authors show a link between a heuristic controller used in industry and a theoretical generalized controller. First, we clarify the internal structure of the generalized two-degree-of-freedom controller which yields a link between the theoretical researches and the practical applications. Secondly, we indicate how to blend identification and control together without any modification of the controller. This is in fact the problem of closed-loop identification. Thirdly, we propose a design technique of a free parameter taking into account a robust stability based on the information obtained from the identification. Finally, we apply the proposed algorithm to trajectory control of DD robot.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.555-558
• /
• 1995

In designing the anti-sway controller for crane system in the industrial field, one of the basic problem is to keep the stability of system, even if the mathematical model of the plant is not exact and disturbance exists. Form this point of view, a two-degree-of-freedom(2DOF) servo controller effact to the system in which the integral compensation is effctive only when a modeling error and/or a disturbance input exist. In this paper, the change of load weight and variation of wire rope length considered as the structured uncertainty, and design the 2DOF servo contorller using independently the informations of reference signal and control output with both feedforward and feedback. The effectivenss is proved through the results for the anti-sway system in the system with the position control of trolley.