• Corrosion Science and Technology
• /
• v.2 no.6
• /
• pp.289-295
• /
• 2003

The corrosion behavior of Cr-N coated steels with different phases (${\alpha}-Cr$, CrN and $Cr_2N$) deposited by cathodic arc deposition on Hl3 steel was investigated in 3.5% NaCl solution at ambient temperature. Potentiodynamic polarization test, electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) were the techniques applied to characterize the corrosion behavior. It was found that the CrN coating had a lower current density from potentiodynamic polarization test than others. The porosity, corresponding to the ratio of the polarization resistance of the uncoated and the coated substrate, was higher in the $Cr_2N$ coating than in the other Cr-N coated steels. EIS measurements showed, for the most of Cr-N coated steels, that the Bode plot presented two time constants. Also, the $Cr_2N$ coating represents the characteristic of Warburg behavior after 72hr of immersion. The coating morphologies were examined in planar view and cross-section by SEM analyses and the results were compared with those of the electrochemical measurement. The CrN coating had a dense, columnar grain-sized microstructure with minor intergranular porosity. From the above results, the CrN coating provided a better corrosion protection than the other Cr-N coated steels.

• Phonetics and Speech Sciences
• /
• v.3 no.1
• /
• pp.145-151
• /
• 2011

In view of the hypothesis that the effects of Parkinson's disease on voice production can be detected before pharmacological intervention, the prosodic features of patients with idiopathic Parkinson's disease (IPD) and a healthy aging group were diagnostically analyzed with the long term object of establishing, for clinical purposes, early disease-progression biomarkers. Twenty patients (male 8; female 12) with IPD (prior to pharmacological intervention) and a healthy control group of 22 (male 10; female 12) were selected. Ten sentences were recorded with a head-worn microphone. One sentence was chosen for the analysis of this paper. Relevant parameters, i.e. 3-dimensional model (F0, intensity, duration) and pitch and intensity related slopes (maxEnergy, maxF0, meanAbS, semiT, meanEnergy, meanF0), were analyzed by two-group discriminant analysis. The stepwise estimation method of discriminant analysis was performed by gender. The discriminant functions predicted 83.9% of the male test data correctly while the prediction rate was 93.1% for the female group. The results showed that meanF0_slope and semiT_slope were more important parameters than the others for the male group. For the female group, the meanEnergy_slope and maxEnergy_slope were the important ones. These findings indicate that significant parameters are different for the male and female group. Gender lifestyle may be responsible for this difference. Dysprosodic features of IPD show not simultaneously but progressively in terms of F0, intensity and duration.

• Hwankyungkyoyuk
• /
• v.19 no.1 s.29
• /
• pp.80-89
• /
• 2006

The purpose of this study is to elucidate the concept of the internal value of environmental education (EE), and to present a new concept of 'Inquiry-Based EE' as a method to realize the internal value of EE. Since the introduction of EE, the 'external' value has been overwhelmingly present, as is shown in the commonly expressed purpose of EE. The ultimate goal of EE has been considered as to solve environmental problems through educational approach, which is important, but external value in relation with education. Generally, education has its own value, which may be more important than external value. But in EE area, that idea has not been discussed much. So, this study argued that EE has, or should have, the internal value of education. This study also examined the concept of inquiry, and presented it as two types of inquiry: the scientific inquiry and the 'insightful inquiry', and argued that the insightful inquiry is important as well as scientific inquiry in EE. Then, this study presented a new concept of 'inquiry-based EE', which can be defined as EE that is based on both the scientific and insightful inquiries, and makes the student be able to 'see' the world with the environmental world view. Lastly, this study presented also a new concept of 'Environmental Studies for EE, (ESEE)'. This means that the traditional environmental science is considered to be not well developed under the perspective of EE. From this viewpoint, this study presented the needed contents of the conceptually presented ESEE. In short, this research asserts that 'inquiry-based EE' is needed to make students 'see' the world environmentally, which is the very important value of EE, the internal value of EE, not very much examined. The 'inquiry-base EE' is considered to possibly advance EE as a new paradigm.

• Journal of the Korea Computer Graphics Society
• /
• v.3 no.2
• /
• pp.1-13
• /
• 1997

Two factors are required for a virtual reality system; realism and immersion. Since realism is determined primarily by the realistic image, objects in a virtual environment should be represented with details by their own characteristics. Also, reflection on light must be considered. On the other hand, immersion is defined as realistic movements and fast interactions. Thus, virtual environment should be rendered as fast as possibl. Regular frame rate should also be kept to make moves as intended by the user. In a complex virtual environment composed of objects with various levels, the appropriate level for individual object should be assigned according to the view point, in other words, the selection of level-of-detail is needed. In this paper, the problem of determining the levels of detail is formalized in terms of error, cost and L -distance. Error is defined as the difference between the current level image and the highest level image, cost as rendering time, and L-distance as the level difference between the previous and the current level. To solve this problem, a new method called the well-distributed adaptive algorithmis proposed.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.4
• /
• pp.125-133
• /
• 1998

In this study, an experiment in the field was performed to analyze the influence of steel fiber and silica fume on the rebound ratios of shotcrete. The experimental parameters which are the reinforcing methods(steel fiber, wire mesh), steel fiber contents(0.0%, 0.5%. 0.75%, 1.0%), silica fume contents(0.0%, 10.0%), and the three placing parts(side wall, shoulder, crown) were chosun. According to the results for the side wall in this test, the larger the fiber contents are in case of steel fiber reinforced shotcrete, the less the rebound ratios are within the range of 20~35%, compared to the wire mesh reinforced shotcrte. And also, the reduced rebound ratios were vary larger in using steel fiber reinforced shotcrete with silica fume content of 10%, and these results are true of the shoulder and the crown, respectively. In addition, the four-stage phenomenon for the rebound of the SFRS were estimated in the view of the co-action between steel fiber and coarse aggregate based upon the existing two-stage analysis method.

• The Korean Journal of Pain
• /
• v.25 no.2
• /
• pp.81-88
• /
• 2012

Background: In discography performed during percutaneous endoscopic lumbar discectomy (PELD) via the posterolateral approach, it is difficult to create a fluoroscopic tunnel view because a long needle is required for discography and the guide-wire used for consecutive PELD interrupts rotation of fluoroscope. A stereotactic system was designed to facilitate the determination of the needle entry point, and the feasibility of this system was evaluated during interventional spine procedures. Methods: A newly designed stereotactic guidance system underwent a field test application for PELD. Sixty patients who underwent single-level PELD at L4-L5 were randomly divided into conventional or stereotactic groups. PELD was performed via the posterolateral approach using the entry point on the skin determined by premeasured distance from the midline and angles according to preoperative magnetic resonance imaging (MRI) findings. Needle entry accuracy provided by the two groups was determined by comparing the distance and angle measured by postoperative computed tomography with those measured by preoperative MRI. The duration and radiation exposure for determining the entry point were measured in the groups. Results: The new stereotactic guidance system and the conventional method provided similarly accurate entry points for discography and consecutive PELD. However, the new stereotactic guidance system lowered the duration and radiation exposure for determining the entry point. Conclusions: The new stereotactic guidance system under fluoroscopy provided a reliable needle entry point for discography and consecutive PELD. Furthermore, it reduced the duration and radiation exposure associated with determining needle entry.

• Archives of design research
• /
• no.16
• /
• pp.185-196
• /
• 1996

The series of ‘Dubonnet’poster is one of the masterpieces of Cassandre who was the leader of advertising poster in 1920's and 1930's. Orihinally it was a triptych, but it was developed as a serial work later through lettering and seasonal advertising posters. It was kept in circulation for more than two decades and issued in a variety of formats. In this thesis I tried to figure out the artistic character and uniqueness of Cassandre's poster by analyzing it with many different points of view of the poster, the stream of changing style and influence from the Avant-garde painting. In chapterII, objectively analyzing the series of‘Dubonnet’one by one, I examined the method that Cassandre used to deliver the concept of advertising and his message. The triptych, the first one of series of Dubonnet poster is witty, the slogan is a pun using the words dubo(doubt), bon(good), and Dubonnet, and the theme is treated as an animated sequence in the manner of a comic strip. In the following winter and summer seasonal advertising posters, the‘Dubonnet man’in the same position is enjoying the‘Dubonnet’, irrespective of the hazards of climate and season, There was a change towards 1929 that rectilinear design gave place to supple and undulating lines in Cassandre's posters. Seasonal advertising posters also showed the change, and the tendency of realistic and concrete elements of an expression was strengthened. In chapterIII, I studied three as main characters of Cassandre's poster. The first one is simple and geometric expression, second one is uniqueness of figures and the last one is important roll of lettering. Cassandre believed that there were fundamental differences between the function of a poster and that of a painting. He also recognized that the symbol was the essential element in the poster design, which would be simply and swiftly recognized. The recognition led him to simple design and bold geometric abstraction. He was a man who knew the value of copy in advertising and developed it fully in his simplified geometric compositions by integrating of letterforms and image. The‘Dubonnet man’is geometrized, almost featureless. This approach of rendering human beings was one that Cassandre had used from the early years, most notably in his posters for Dubonnet.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.155-163
• /
• 2006

Car seat is one the most important element to make comfortable drivability. It can absorb the impact or vibration during driving state. In addition to those factors, it is needed to have enough strength for passenger safety. From energy efficiency and environmental point of view lighter passenger car seat frame becomes hot issue in the auto industry. In this paper, weight optimization methodology is investigated for commercial car seat frame using CAE. Optimized designs for seat frame are developed using commercially available finite element code(ANSYS) and design of experiment method. At first, car seat frame is modelled using 3-D computer aided design tool(CATIA) and simplified for finite element modelling. Finite element analysis is carried out for the case of FMVSS 202 Head Restraint test to check the strength of the original seat frame. Two base brackets are selected as optimized elements that are the heaviest parts in the seat frame. After finite element analysis for the brackets with similar load condition to the previous test optimization technique is applied for 10% to 50% weight reduction. Design of experiment is utilized to obtain optimization design for the bracket based on the modified 50% weight reduction model in which outer shape of the bracket is conserved. Weight optimization models result in the decrease of the strength in spite of weight reduction. The more design points should be considered to get better optimized model. The more advanced optimization technique may be utilized for more parts of the seat frame to increase whole seat frame characteristics in the future.

• Korean Institute of Interior Design Journal
• /
• v.17 no.3
• /
• pp.23-33
• /
• 2008

After the concept of apartments was introduced in 1960s in Korea, on account of the development of architectural technology and science, high-rise residences in Korea are getting higher, and these residences have been becoming high-rise commercial/residential buildings since 1990. Nowadays, as the construction of high-rise commercial residential building complex is booming, the difference between these complex and high-rise apartments is getting smaller, and these two kind of high-rise residences are becoming new residential style in Korea. And these high-rise residences are considered the symbol of wealth owing to the marketing strategy emphasizing high quality, refined interior, a fair view, and the protection of privacy. However, high-rise residences bring about many problems related to health and psychology caused by the consumption of a large amount of energy, pollutant emission, the deterioration of the quality of indoor air, and vibration. For this reason, in this study, we tried to emphasize the necessity of environment-friendly access to provide healthy living environment and to reduce the negative effect of housing life in high-rise residences, and find the method to improve environment-friendly quality and health of residents in interior space. Therefore, this study aims to detect the problems and the items to be improved of interior spaces of high-rise residences by quantitative, qualitative analysis of the evaluation elements and the floor planning elements deduced from environment-friendly architectural certification in Korea and the other countries, and suggest the guideline to improve the environment-friendly quality of these interior spaces.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.339-350
• /
• 2010

Despite lots of efforts to obtain an accurate picture of structure at the level of individual ASes, there is a few application works using the AS-level Internet topology. In this paper, we show that the power-law fits the number of down-stream customer ASes very well and also present the distributions of AS links with the "public view" from UCLA IRL laboratory. Moreover, we obtain the distributions of source-destination pairs of routing hops for two sites in Korea and the United States, and then we propose a new method to decide the randomness of Internet traffic using the obtained distributions and the BGP valley-free routing policy. The randomness of traffic must be a portent of outbreak of the distributed denial-of-service attacks.