• Journal of Naturopathy
• /
• v.10 no.2
• /
• pp.108-113
• /
• 2021

Background: Results on the action of antioxidants in extracts of Equisetum hyemale stems and roots have already been reported, but the antioxidant properties have not been analyzed. Purpose: This study was to determine the molecular structure of antioxidants in substances extracted from E. hyemale stems and roots. Methods: Component analysis was analyzed by HPLC and LC-MS after extraction with hot water and ethyl alcohol. Results: The HPLC chromatogram of stem and root extracts showed four significant peaks at a wavelength of 205 nm. Peak 1 at 280 nm is a typical simple phenolic type, and both peaks 2-4 near 280 nm and 370 nm are typical flavonoid glycosides. As for the antioxidant level of the extract by HPLC analysis, the sum of the peaks at 740 nm was the highest at 3,669 mAU in the 100% ethanol extract, 3,096 mAU in the 70% ethanol extract, and 2,868 mAU in the hot water extract. As a result of LC-MS analysis of the antioxidant extract, kaempferol-3-sophoroside-7-glucoside with a molecular weight of 772 da at peak 3, and kaempferol-3-sophoroside-8-glucoside with a molecular weight of 788 and 772 at peak 4 was identified. Conclusions: The above results show that two types of antioxidants were identified in the antioxidant extract of E. hyemale exrtracts. Therefore, the potential as a raw material for functional cosmetics has increased.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.80-86
• /
• 2002

Volatile compounds in three different kinds of crude vinegars obtained from oak (Quercus serrata), bamboo (phyllostachys) and pine (Pinus densiflora) species were analyzed by the solid-phase microextraction (SPME) method. A total of 264 peaks were detected on the chromatograms obtained from the polar (CBP 20) and the nonpolar (CBP 1) columns, which were used for analyzing the volatile compounds in these vinegars. The major volatile compounds identified by using the polar column were 2-butanone, acetic acid, guaiacol, phenol, cresols, 4-ethyl guaiacol, 4-ethyl phenol, and syringol. Using the nonpolar column, seven compounds could be identified: 1,2-dimethoxybenzyl alcohol, 1-hydroxy-2-butanone, 1-(2-furanyl)-1-propane, ethisolide, furfuryl acetate, 1,2-dimethoxybenzene, phenyl acetate. The volatile compounds were classified into five groups: phenols, neutral compounds, organic acids, esters and others. The phenols were the main component and comprised 49~65% of the volatile compounds of these vinegars. In the case of bamboo vinegar, the proportion of the phenols in the volatile compounds was lower than that of the two wood vinegars. However, the proportions of the neutral compounds and the organic acids were higher than those of the wood vinegars. Therefore, it seems that these differences of the proportions of the volatile compounds would make a certain difference of a smoke flavor between the bamboo vinegar and the wood vinegars.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.210-217
• /
• 2022

In this paper, a study is conducted on the acceptable tolerance of an alignment device to reduce the optical loss caused by the alignment tolerance of a window hermetic optical connector. To increase the transmission distance of optical signals and fiber-optic communication systems, it is necessary to maintain and improve the high optical efficiency of the connectors used to bond optical fibers. In the case of the window hermetic optical connector, the optical system is aligned through an alignment device. At this time, since the two connectors are used together, each component is fixed, and further alignment is impossible. The alignment tolerance of the housing system and pin used to align the optical system of the connector causes optical loss, leading to serious problems in the fiber-optic communication system. Thus, to find the acceptable tolerance required for manufacturing the optical-connector alignment device, tolerance analysis is performed on the components of the optical connector, such as the ball lens and the window. We also implement single-mode and multimode optical-connector systems, respectively. Based on the results, we determine an acceptable tolerance value for the alignment device.

• Journal of Korea Foundry Society
• /
• v.41 no.4
• /
• pp.349-356
• /
• 2021

Effects of cooling condition after solidification on the microstructure and the mechanical properties of 0.36Mn containing ductile cast iron have been studied based on the minimized addition of Cu and Sn for vehicle component applications with better quality and cost competitiveness. Cu and Sn were selected for additional elements judging from the well-known fact of strong tendency of pearlite promotion followed by the tensile property improvement. After pouring of the Mg treated cast iron melt with various chemical compositions into the block specimens, two ways of post solidification cooling conditions were applied for comparison; both cooling in the mold and cooling in the air after dismantle at 800℃. The pearlite fraction of the mold-cooled specimens was analyzed as 27-44%, with the tensile strength and elongation of 513-568N/mm² and 10.4-14.3%, respectively. Whilest, the air cooled specimens showed the pearlite fraction of 77~85%, with the tensile strength and elongation of 728~758N/mm² and 3.2~6.0%, respectively. It is worthwhile to note that the remarkable improvement of both tensile strength and elongation of the ductile iron was achieved by the present air cooling condition with the minimized combined addition of Cu and Sn to the 0.36Mn containing ductile iron.

• Korean Journal of Biological Psychiatry
• /
• v.28 no.1
• /
• pp.13-22
• /
• 2021

Objectives Despite growing attention to anxiety in bipolar disorder (BD), little research has assessed anxiety symptoms in the course of BD. The current prospective follow-up study examines the influence of subjectively and objectively measured anxiety symptoms on the course of BD. Methods A total of 49 patients with BD were followed-up prospectively for average of one year at an average of four months interval. The Korean version of the Beck Anxiety Inventory (K-BAI), the Hamilton Anxiety Rating Scale, heart rate variability (HRV) were used to measure anxiety subjectively, objectively and physiologically. Participants were divided into high and low anxiety groups based on their K-BAI scores. Kaplan-Meier survival analysis was performed to compare the recurrence of mood episode, suicide attempt, emergency room visit, and psychiatric hospitalization between two groups. Mediators were investigated with Cox proportional hazards models. Results Compared to the low anxiety group, the high anxiety group reported significantly higher impulsiveness (p = 0.016) and lower high frequency component on HRV (p = 0.007) after controlling for severity of BD. Regarding survival analysis, the high anxiety group showed hastened depressive episode recurrence (p = 0.048) and suicidal ideation was the mediator of the hazard ratio (HR) 1.089 (p = 0.029) in the Cox model. Moreover, the high anxiety group showed a tendency of accelerated suicide attempt (p = 0.12) and impulsivity was the risk factor of suicide attempt (HR = 1.089, p = 0.036). Conclusions This interim analysis of prospective study suggests that high anxiety level in BD may anticipate unfavorable course. Further studies are needed to understand the multifactorial mechanism of anxious bipolar patients.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.921-926
• /
• 2022

Sugar solutions (5%, 10%, 15% and 20%) were tested by seven sensors of Astree E-Tongue for selecting a sensor for sweetness. NMS sensor was chosen as a sensor for sweetness among two sensors (PKS and NMS sensors selected in first stage) by considering precision, linearity and accuracy. Sugar, fructose, glucose and xylitol (5%, 10% and 15%) were tested by E-tongue. The principal component analysis (PCA) result by E-Tongue with seven sensors at 5% concentration level of four sweetners was not satisfactory (Discrimination index was -0.1). On the other hand, the relative NMS sensor response values were derived as 1.08 (fructose), 0.99 (glucose) and 1.00 (xylitol) comparing to sugar. Only the E-Tongue relative glucose response 0.99 was different from 0.5~0.75 of the relative sweetness range reported as the human sensory test results. Considering the excellent precision (%RSD, 1.53~3.64%) of E-Tongue using NMS single sensor for three types of sweeteners compared to sugar in the concentration range of 5% to 15%, replacing sensory test of sweetened beverages by E-Tongue might be possible for new product development and quality control.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.243-253
• /
• 2022

Using non-destructive analytical methods, we identified the material characteristics of two gold fabric artifacts excavated from the Cheongsong Sim clan (Bugeum Wonsam, Jikgeum Chima), including the artifact condition, fiber type, surface contamination, and metallic threads. We found that the artifacts were buried and had turned brown; thus, we were unable to determine their original color. The fiber type was determined to be silk from cocoons, based on scanning electron microscopy, Fourier transform infrared (FT-IR) analyses of Amide I, II, III, and IV peaks, and color reactions Further, the FT-IR and X-ray fluorescence (XRF) analyses identified the white and black stains as natural resin hydrolyzed substances, such as lipids and proteins, that occurred as microbial decomposition due to body decay. Finally, the XRF analyses identified the thin gold layer of the metallic yarn as gold (Au). According to the FT-IR data and the color reaction to the metallic yarn medium, the adhesive component of the medium was a product of-Amides I, II, III, and 3000 cm^-1 within Amides A and B (an animal type), respectively. Thus, the medium was identified as Hanji (Korean paper), which is made from domestically produced Broussonetia kazinoki fibers.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.71-80
• /
• 2022

The purpose of this study was to evaluate the effects of the non-pharmacological intervention on depressive symptoms in the older adults with mild cognitive impairment. A total of 1,147 studies were retrieved from PubMed, CINAHL, PsycINFO, Science direct, KISS, RISS, and DBPia. Twenty-one studies which met the criteria were selected and the quality assessment was conducted independently by two investigators. The effect size of non-pharmacological intervention was estimated using Comprehensive Meta-Analysis 3.0. The overall effect size turned out to be the medium effect size (Hedges' g=-0.68, 95% CI=-1.01~-0.36). As a result of the subgroup analysis, the intervention type was statistically significant. The effect size of cognitive intervention (Hedges' g=-1.03, 95% CI=-1.43~-0.61) and multi component intervention (Hedges' g=-0.97, 95% CI=-1.63~-0.33) was greater than excise intervention (Hedges' g=-0.53, 95% CI=-1.16~0.03). This study shows that non-pharmacological intervention was also effective in reducing depressive symptoms in the older adults with mild cognitive impairment. Based on the research results, it is expected that various non-pharmacological intervention studies will be attempted to improve cognitive function and depressive symptoms of the older adults with mild cognitive impairment.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.84-84
• /
• 2003

DNA methylation is involved in epigenetic processes such as X-chromosome inactivation, imprinting and silencing of transposons. DNA methylation is a highly plastic and critical component of mammalian development The DNA methyltransferases (Dnmts) are responsible for the generation of genomic methylation patterns, which lead to transcriptional silencing. The maintenance DNA methyltransferase enzyme, Dnmt 1, and the de novo methyltransferase, Dnmt3a and Dnmt3b, are indispensable for development because mice homozygous for the targeted disruption of any of these genes are not viable. The occurrence of DNA methylation is not random, and it can result in gene silencing The mechanisms underlying these processes are poorly understood. It is well established that DNA methylation and histone deacetylation operate along a common mechanistic pathway to repress transcription through the action of methyl-binding domain proteins (MBDs), which are components of, or recruit, histone deacetylase (HDAC) complexes to methylated DNA. As a basis for future studies on the role of the DNA-methyl-transferase in porcine development, we have isolated and characterized a partial cDNA coding for the porcine Dnmt1. Total RNA of testis, lung and ovary was isolated with TRlzol according to the manufacture's specifications. 5 ug of total RNA was reverse transcribed with Super Script II in the presence of porcine Dnmt 1 specific primers. Standard PCRs were performed in a total volume of 50 ul with cDNA as template. Two DNA fragmenets in different position were produced about 700bp, 1500bp and were cloned into pCR II-TOPO according to the manufacture's specification. Assembly of all sequences resulted in a cDNA from 158bp of 5'to 4861bp of 3'compare with the known human maintenance methyltransferase. Now, we are cloning the unknown Dnmt 1 region by 5'-RACE method and expression of Dnmt 1 in tissues from adult porcine animals.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.23-30
• /
• 1993

This study was conducted to obtain the fundamental information on antioxidant component as affected by process of grain filling in different plant types of sesame. Sesamin and sesamolin as antioxidant components, oil content and seed weight were investigated for two plant types with different by branching habit. The sesamin and sesamolin contents in grains followed a pattern of increase immediately after flowering in branch type and monocapsule habit than non-branch type and tricapsule habit. But they started to decrease around 45 days after flowering, which oil content and seed weight continued to increase until maturity. The sesamin content increased quickly up from 10th to 40th day after flowering and showed almost maximum at 43th day after flowering. The sesamolin content increased quickly up from 20th to 30th day after flowering and showed almost maximum at 45th day after flowering. The oil content increased quickly up from 20th to 30th day after flowering and showed almost maximum at 47th day after flowering. The seed weight increased quickly up from 20th to 40th day after flowering and showed almost maximum at 48th day. The sesamin content, sesamolin content, oil content and seed weight showed almost maximum at from 43th to 48th day after flowering. So that this period was considered to be of physiological maturity.