• 대한조선학회논문집
• /
• 제61권3호
• /
• pp.200-207
• /
• 2024

A multi-component force sensor has been developed to measure force and moment components in high-speed flow media for submerged models. The size of the test model is determined based on the Reynolds number of the model at the test speed and expected blockage effect. A two-component force sensor unit has been created by assembling pairs of column elements arranged symmetrically under an eccentric load. The six-component force sensor is constructed with symmetric arrangements of two-component force sensor units in a rectangular plane. The signals generated from the strain gauges attached to the surface of the elements can be converted into force signals. The performance of the waterproof six-component force sensor has been evaluated through calibration. A simplified interference decomposition procedure has been introduced to increase the accuracy of measurement.

• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.234-237
• /
• 2010

P300 component of the event-related potential(ERP) has been studied for theoretical, empirical, and clinical applications. Nowadays the 1-, 2-, and 3-stimulus oddball paradigms are used for eliciting P300 component of EEG in the auditory stimulus experiments. In this paper, we used a method to add one more stimulus to the 3-stimulus auditory paradigm. The adding stimulus has not the same volume but the same tone of the target stimulus. The 4-stimulus oddball paradigm to use two targets is used to elicit the P300 event-related potentials. In 4-stimulus oddball paradigm, an infrequent non-target (p=0.10) is presented in addition to two infrequent targets (p=0.10) and a frequent standard (p=0.70). Two target stimuli elicited a P300 component with a parietal maximum distribution. The amplitude of the P300 in target 2 was larger than that in target 1 and the latency of the P300 in target 2 was longer than that in target 1. The P300 component due to target 2 stimuli was larger than that due to target 1 stimuli. The experimental results approve that the 4-stimulus oddball paradigm can elicit P300 component clearly. The results are compared with the results of the traditional oddball paradigm.

• 산업공학
• /
• 제22권4호
• /
• pp.368-375
• /
• 2009

This paper considers a two-stage supply system consisting of two make-to-stock facilities. The facility in the first stage produces a single type of component in anticipation of future demands from the market and the end item production while the facility in the second stage produces the end item in anticipation of future demands from the OEM customers. The facility in the first stage has the option of to accept or reject each incoming demand from the market. In this paper, we address the problem of how to control the exogenous component demand and how to manage the production of the end item and the component so as to maximize the system's profit subject to the system costs. In this paper, we present a heuristic policy that is the base-stock production policy combined with a linear switching curve for component demand control. Numerical study is implemented under different operating conditions of the system and it shows that the performance of the heuristic is very promising compared to that of the optimal policy for the Markov model.

• Journal of Community Nutrition
• /
• 제8권1호
• /
• pp.3-8
• /
• 2006

This retrospective study was designed to evaluate the nutrient contributions of the five meal components of school lunch menus planned for elementary students in two school districts (District A and B) in the Midwestern state of the United States. The 4-week cycle menu was planned for two time periods (Period 1 and Period 2) following guidelines for NuMenus and general menu planning principles. Menu components of planned and served menus for two time periods were analyzed using $Nutri-Kids^{TM}$. No significant differences in the nutrient content of between Periods 1 and 2 were found for District A. District B served significantly more vitamin A and total fat in Period 1 and significantly more calories, iron, vitamin A, protein, and total fat in Period 2 than was planned. The major nutrients provided by the entree component included protein, calories, cholesterol, total fat, saturated fat, and sodium. Milk was an important source of calcium and provided approximately one-third of the total protein and vitamin A in the meal. The vegetable/fruit component was the major source of vitamins A and C. The grain/bread component provided approximately 20% of the carbohydrates among five meal components. The miscellaneous component affected the sodium and fat content of the menus. Menu planners can use the results of this study to enhance their knowledge of the nutrient contributions of each meal component and as inputs for planning menus that meet children's nutritional requirements.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2002년도 춘계학술대회
• /
• pp.89-95
• /
• 2002

This paper considers the problem of estimating paramaters of the bivariate exponential distribution with a loaction parameter for a two-component shared parallel system using component data from system-level life test terminated at the time of the prespecified number of system failure. In the system-level life testing, there are three patterns of failure types; 1) both component failed 2) both component censored 3) one is failed and the other is censored. In the third case, we assume that the failure time might be known or unknown. The maximum likelihood estimators are obtained for the case of known/unknown failure time when the other component is censored.

• 한국컴퓨터산업학회논문지
• /
• 제4권4호
• /
• pp.479-490
• /
• 2003

컴포넌트 기반 소프트웨어개발 (CBD: Component Based Development)은 재사용 부품을 기반하여 소프트웨어 개발, 수정, 유지보수를 용이하게 지원한다. 따라서 컴포넌트는 강한 응집력과 양한 결합력으로 개발되어야 한다. 본 논문에서는use case와 클래스를 간에 유사성을 통한 클러스터링 분석에 기반 하여 컴포넌트 식별에 대해 연구한다. 컴포넌트 참조 모델과 프레임워크를 제시하여 사례를 통해 검증한다. 컴포넌트 식별 방법은 추출, 명세 및 아키？쳐를 지원한다. 이들 방법론은 기존의 객체지향 방법론을 참조하며 분석에서 구현까지의 추적성을 지원하며 재사용 컴포넌트의 모듈성 지원을 위해 강한 응집력과 약한 결합력을 반영한다.

• 응용통계연구
• /
• 제27권1호
• /
• pp.31-41
• /
• 2014

행렬도(biplot)는 이원표 자료행렬(two-way data matrix)의 행과 열을 한 그림에 동시에 나타내는 탐색적 방법으로, 복잡한 다변량 분석 결과를 보다 쉽게 파악할 수 있는 장점이 있다. 특히 주성분인자 행렬도(principal component factor biplot; PCFB)는 인자분석을 통해서 변수들 간의 상호의존 구조를 탐색하기 위한 시각적 도구이다. 자료에 따라 잠재된 변수들이 독립(independent)이고 비가우시안(non-Gaussian) 분포를 가진다는 사전 정보가 있을 때, Jutten과 Herault (1991)가 제안한 독립성분분석(independent component analysis)을 이용한다. 이 경우 주성분법을 이용한 인자분석을 적용하면 원래 변수들의 상호 관계를 잘못 해석할 수도 있다. 따라서 본 논문에서는 자료에 따라 잠재된 변수들이 독립이고 비가우시안 분포를 가진다는 사전 정보가 있을 때, 독립성분분석을 응용하여 원래 변수들 간의 상호 관계를 기하학적으로 살펴볼 수 있는 시각적 도구인 독립성분 행렬도(independent component biplot; ICB)를 제안하려 한다.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.30-48
• /
• 2011

A three-dimensional thermal-hydraulic code, CUPID, has been developed for the analysis of transient two-phase flows at component scale. The CUPID code adopts a two-fluid three-field model for two-phase flows. A semi-implicit two-step numerical method was developed to obtain numerical solutions on unstructured grids. This paper presents an overview of the CUPID code development and assessment strategy. The governing equations, physical models, numerical methods and their improvements, and the systematic verification and validation processes are discussed. The code couplings with a system code, MARS, and, a three-dimensional reactor kinetics code, MASTER, are also presented.

• Journal of the Korean Data and Information Science Society
• /
• 제21권3호
• /
• pp.589-595
• /
• 2010

In discriminant analysis, we consider an intraclass correlation pattern by principal component analysis. We assume that the two populations are equally likely and the costs of misclassification are equal. In this situation, we consider two procedures, i.e., the test and proportion procedures, for selecting the principal components in classifica-tion. We compare the regular classification method and the proposed two procedures. We consider two methods for estimating error rate, i.e., the leave-one-out method and the bootstrap method.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.317-323
• /
• 2013

In-mold coating is a reactive fluid designed to improve the surface quality of injection molded thermoplastic substrate in functional and cosmetic properties. In this study, a mixing head for in-mold coating was designed, and mixing characteristics of two-component polyurethane flowing through runner were investigated based on flow simulations. In order to achieve uniform mixing of two components injected through straight mixing head, an impingement aftermixer was used in runner design. Semi-circular cross-section was better than circular one for runners for uniform mixing. With increasing runner length and flow rate, mixing became more uniform. In addition, the degree of mixing was more improved with decreasing viscosity of isocyanate.