• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1711-1720
• /
• 2020

Particulate matter (PM) that has been artificially generated during the recent of rapid industrialization and urbanization moves and disperses according to weather conditions, and adversely affects the human skin and respiratory systems. The purpose of this study is to predict the PM10 concentration in Seoul using meteorological factors as input dataset for multiple linear regression (MLR), support vector machine (SVM), and random forest (RF) models, and compared and evaluated the performance of the models. First, the PM10 concentration data obtained at 39 air quality monitoring sites (AQMS) in Seoul were divided into training and validation dataset (8:2 ratio). The nine meteorological factors (mean, maximum, and minimum temperature, precipitation, average and maximum wind speed, wind direction, yellow dust, and relative humidity), obtained by the automatic weather system (AWS), were composed to input dataset of models. The coefficients of determination (R2) between the observed PM10 concentration and that predicted by the MLR, SVM, and RF models was 0.260, 0.772, and 0.793, respectively, and the RF model best predicted the PM10 concentration. Among the AQMS used for model validation, Gwanak-gu and Gangnam-daero AQMS are relatively close to AWS, and the SVM and RF models were highly accurate according to the model validations. The Jongno-gu AQMS is relatively far from the AWS, but since PM10 concentration for the two adjacent AQMS were used for model training, both models presented high accuracy. By contrast, Yongsan-gu AQMS was relatively far from AQMS and AWS, both models performed poorly.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4571-4584
• /
• 2022

The analysis of rapid flow transients in Reactor Coolant Pumps (RCP) is essential for a reactor safety study. An accurate and precise analysis of the RCP coastdown is necessary for the reactor design. The coastdown of RCP affects the coolant temperature and the colloidal crud in the primary coolant. A realistic and kinetic model has been used to investigate the behavior of activated colloidal crud in the primary coolant and steam generator that solves the pump speed analytically. The analytic solution of the non-dimensional flow rate has been determined by the energy ratio β. The kinetic energy of the coolant fluid and the kinetic energy stored in the rotating parts of a pump are two essential parameters in the form of β. Under normal operation, the pump's speed and moment of inertia are constant. However, in a coastdown situation, kinetic damping in the interval has been implemented. A dynamic model ACCP-SMART has been developed for System Integrated Modular and Advanced Reactor (SMART) to investigate the corrosion due to activated colloidal crud. The Fickian diffusion model has been implemented as the reference corrosion model for the constituent component of the primary loop of the SMART reactor. The activated colloidal crud activity in the primary coolant and steam generator of the SMART reactor has been studied for different equilibrium corrosion rates, linear increase in corrosion rate, and dynamic RCP coastdown situation energy ratio b. The coolant specific activity of SMART reactor equilibrium corrosion (4.0 mg s^-1) has been found 9.63×10^-3 µCi cm^-3, 3.53×10^-3 µC cm^-3, 2.39×10^-2 µC cm^-3, 8.10×10^-3 µC cm^-3, 6.77× 10^-3 µC cm^-3, 4.95×10^-4 µC cm^-3, 1.19×10^-3 µC cm^-3, and 7.87×10^-4 µC cm^-3 for ²⁴Na, ⁵⁴Mn, ⁵⁶Mn, ⁵⁹Fe, ⁵⁸Co, ⁶⁰Co, ⁹⁹Mo, and ⁵¹Cr which are 14.95%, 5.48%, 37.08%, 12.57%, 10.51%, 0.77%, 18.50%, and 0.12% respectively. For linear and exponential coastdown with a constant corrosion rate, the total coolant and steam generator activity approaches a higher saturation value than the normal values. The coolant and steam generator activity changes considerably with kinetic corrosion rate, equilibrium corrosion, growth of corrosion rate (ΔC/Δt), and RCP coastdown situations. The effect of the RCP coastdown on the specific activity of the steam generators is smeared by linearly rising corrosion rates, equilibrium corrosion, and rapid coasting down of the RCP. However, the time taken to reach the saturation activity is also influenced by the slope of corrosion rate, coastdown situation, equilibrium corrosion rate, and energy ratio β.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.107-120
• /
• 2010

The effect of potential future climate change on the inflow of agricultural reservoir and its impact to downstream streamflow by reservoir operation for paddy irrigation water was assessed using the SLURP (semi-distributed land use-based runoff process), a physically based hydrological model. The fundamental input data (elevation, meteorological data, land use, soil, vegetation) was collected to calibrate and validate of the SLURP model for a 366.5 $km^2$ watershed including two agricultural reservoirs (Geumgwang and Gosam) located in Anseongcheon watershed. Then, the CCCma CGCM2 data by SRES (special report on emissions scenarios) A2 and B2 scenarios of the IPCC (intergovernmental panel on climate change) was used to assess the future potential climate change. The future weather data for the year, m ms, m5ms and 2amms was downscaled by Change Factor method through bias-correction using 3m years (1977-2006) weather data of 3 meteorological stations of the watershed. In addition, the future land uses were predicted by modified CA (cellular automata)-Markov technique using the time series land use data fromFactosat images. Also the future vegetation cover information was predicted and considered by the linear regression between monthly NDVI (normalized difference vegetation index) from NOAA AVHRR images and monthly mean temperature using eight years (1998-2006) data.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.77-86
• /
• 2017

This study was conducted to analyze the relationship among climatic factors and radial growth of Pinus densiflora and Larix kaempferi in South Korea. To determine the climate-growth relationship, cluster analysis was applied to group surveyed regions by the climatical similarity, and a dendroclimatological model was developed to predict radial growth for each climate group under the RCP 4.5 and RCP 8.5 scenarios for greenhouse gases. The cluster analysis showed four climatic clusters (Cluster 1~4) from 10 regions for P. densiflora and L. kaempferi. The dendroclimatological model was developed through climatic variables and standardized residual chronology for each climatic cluster of P. densiflora and L. kaempferi. Four climatic variables were used in the models for P. densiflora ($R^2$ values between 0.38 to 0.58). Two to five climatic variables were used in the models for L. kaempferi ($R^2$ values between 0.31 to 0.43). The growth simulations with two RCP climate-change scenarios(RCP 4.5 and RCP 8.5) were used for growth prediction. The radial growth of the Cluster 4 of P. densiflora, the mountainous region at high elevation, tend to increase, while those of cluster 2 and 3 of P. densiflora, the region of the hightest average temperature, tends to decrease. The radial growth of the Cluster 1 of L. kaempferi the region of the lowest minimum temperature, while that of Cluster 2, the region of the highest average temperature, tends to decrease. The radial growth of Cluster 3 of L. kaempferi, the region in the east coast and Cluster 4, the region at high elevation, tends to hold steady. The results of this study are expected to provide valuable information necessary for predicting changes in radial growth of Pinus densiflora and Larix kaempferi caused by climate change.

• Journal of Environmental Impact Assessment
• /
• v.26 no.2
• /
• pp.114-126
• /
• 2017

Many studies on climate change and its impacts use a single climate scenario. However, one climate scenario may not accurately predict the potential impacts of climate change. We estimated temperature and precipitation changes by 2070 using 17 of the CMIP5 Global Climate Models (GCMs) and two emission scenarios for three spatial domains: the Asian continent, six East Asia countries, and South Korea. For South Korea, the range of increased minimum temperature was lower than for the ranges of the larger regions, but the range of projected future precipitation was higher. The range of increased minimum temperatures was between $1.3^{\circ}C$ and $5.2^{\circ}C$, and the change in precipitation ranged from - 42.4 mm (- 3.2%) and + 389.8 mm (+ 29.6%) for South Korea. The range of increased minimum temperatures was between $2.3^{\circ}C$ and $8.5^{\circ}C$ for East Asia countries and was between $2.1^{\circ}C$ and $7.4^{\circ}C$ for the Asian continent, and the change in precipitation ranged from 28.8 mm (+ 6.3%) and 156.8 mm (+ 34.3%) for East Asia countries and from 32.4 mm (+ 5.5%) and 126.2 mm (+ 21.3%) for the Asian continent. We suggest climate change studies in South Korea should not use a single GCM or only an ensemble climate model's output and we recommend to use GFDL-CM3 and INMCM4 GCMs to bracket projected change for use in other national climate change studies to represent the range of projected future climate conditions.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.9-19
• /
• 2020

Convective heat transfer is the main component of greenhouse energy loss because the energy loss by this mechanism is greater than those of the other two components (radiative and conductive). Previous studies have examined the convective heat transfer coefficients under natural conditions, but they are not applicable to symmetric thermal screens with zero porosity, and such screens are largely produced and used in Korea. However, the properties of these materials have not been reported in the literature, which causes selectivity issues for users. Therefore, in this study, three screens having similar color and zero porosity were selected, and a mathematical procedure based on radiation balance equations was developed to determine their convective heat transfer coefficients. To conduct the experiment, a hollow wooden structure was built and the thermal screen was tacked over this frame; the theoretical model was applied underneath and over the screen. Input parameters included three components: 1) solar and thermal fluxes; 2) temperature of the screen, black cloth, and ambient air; and 3) wind velocity. The convective heat transfer coefficients were determined as functions of the air-screen temperature difference under open-air environmental conditions. It was observed from the outcomes that the heat transfer coefficients decreased with the increase of the air-screen temperature difference provided that the wind velocity was nearly zero.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.75-84
• /
• 2013

Soil freezing is a phenomenon arising due to temperature difference between atmosphere and ground, and physical properties of soils vary upon the phase change of soil void from liquid to solid (ice). A heat-transfer mechanism for this case can be explained by the conduction in soil layers and the convection on ground surface. Accordingly, the evaluation of proper thermal properties of soils and the convective condition of ground surface is an important task for understanding freezing phenomenon. To describe convection on ground surface, simplified coefficient methods can be applied to deal with various conditions, such as atmospheric temperature, surface vegetation conditions, and soil constituents. In this study, two methods such as n-factor and convection coefficient for the convective ground surface boundary were applied within a commercial numerical program (TEMP/W) for modeling soil freezing phenomenon. Furthermore, the numerical results were compared to laboratory testing results. In the series of the comparison results, the convection coefficient is more appropriate than n-factor method to model the convective boundary condition.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.1
• /
• pp.17-37
• /
• 1987

The purpose of this study is to establish more rational and practical planning theory for amusement park. It analyze and consider the fluctuation of people who come and use the Tong-Ch'on amusement park. The results drawn from this reserch work are as follows; 1. The main visitors of the Tong-Ch'on amusement park are students in their twenties and thirties, and people whose incomes are below 300,000 Won a month. The purpose of visit is for a rest rather than for amusement and user prefer summer, while the user is so rare in wintertime. Those phenomena observed are somewhat different from the real purpose of a amusement park which is on purpose to make profits by offering entertainments to the users. So planner should pay attention to the three points. They are varieties, seasonable diversification and fantastic character of facilties, in the amusement park. 2. The access time of the Tong-Ch'on amusement park was 41 minutes, the use frequency was 4 times a year and resident time was 164 minutes. The relationship of the three factors are as follows; log Y(F) =1.7832-0.0277(A.T) R$^2$=0.75 Y(R. F)=31.8885+3.3217(A.T) R$^2$=0.53 Y(R. T)=224.8959-87.8309 1og(F) R$^2$=0.38 F;Use frequency(time/year) A.T;Access Time(minute) R.T;Resident Time(minute) 3. In the choice of space, there were much differences according to tole user's age, job, degree of education, companion type and purpose of use. 4. There are considerable correlation between use fluctuation and some factors. The factors are season(summer, winter) as a time, temperature, cloud amount, duration of sunshine, weather(rainy-day) as a climate and a day of the week(weekday, holiday) as a social system. The important variables are temperature, cloud amount, duration of sunshine and a day of the week(weekday, holiday) to estimate the user of amusementpark. 5. 1 can reduce the following two types of regression models. 1) log$\sub$e/ Y1 = 6.9114 + 0.l135 TEM + 0.00002 SUN -0.4068W1 + 0.4316 W3 (R$^2$= 0.94) 2) log$\sub$e/ Y2 = 7.2069 + 0.l177 TEM - 0.0990 CLO + 0.4880 W3 (R$^2$=0.95) Y; Number of User TEM; Temperature CLO; Amount of cloud SUN; Duration of Sunshine W1; Weekday W3; Holiday Those model is in order to estimate the user for management of Tong-Ch'on amusement park and use on the computation of facility sloe for reconstruction. Besides the amusement park, city park and outdoor recreation area could estimate of user through this method. But, I am not sure about the regression models because I did not apply the regression models to the other amusement park, city Park or outdoor recreation area. Therefore, I think that this problem needs to be studied on in the future.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.297-303
• /
• 2012

This study examines the isolation-heat performance of fire proof fabric that is equipped over ceiling board in order to secure the capability of arresting the spread of a fire at roof 'Jucsim' structure of Wooden Cultural Properties. For this examination, I conduct experiments with the model and compare two construction methods of fire proof fabric, or flat-type, folding-type. The experiments show the following results. In case of installing the fire proof fabric in flat-type, when the temperature under the ceiling board is $750^{\circ}C$, the temperatures over the ceiling board is $50^{\circ}C$; the difference is $700^{\circ}C$. Compared with the case of removing fire proof fabric, the temperature over the ceiling board is lower by approximately $580^{\circ}C{\sim}600^{\circ}C$. Therefore it can be said that the construction of fire proof fabric enhances the isolation-heat performance. In case of installing the fire proof fabric in folding-type, when the temperature under the ceiling board is $600^{\circ}C$, the temperatures over the ceiling board is $65^{\circ}C$; the difference is approximately $530^{\circ}C$. Thus its isolation-heat performance is a little inferior to the flat-type equipment.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.630-638
• /
• 2009

A computational fluid dynamics(CFD) model is developed and validated with on-site experiments for a urea-based SNCR(selective non-catalytic reduction) process to reduce the nitrogen oxides($NO_x$) in a municipal incinerator. The three-dimensional turbulent reacting flow CFD model having a seven global reaction mechanism under the condition of low CO concentration and 12% excess air and droplet evaporation is used for fluid dynamics simulation of the SNCR process installed in the incinerator. In this SNCR process, urea solution and atomizing air were injected into the secondary combustor, using one front nozzle and two side nozzles. The exit temperature($980^{\circ}C$) of simulation has the same value as in situ experiment one. The $NO_x$ reduction efficiencies of 57% and 59% are obtained from the experiment and CFD simulation, respectively at NSR=1.8(normalized stoichiometric ratio) for the equal flow rate ratio from the three nozzles. It is observed in the CFD simulations with varying the flowrate ratio of the three nozzles that the injection of a two times larger front nozzle flowrate than the side nozzle flowrate produces 8% higher $NO_x$ reduction efficiency than the injection of the equal ratio flowrate in each nozzle.