• Atmosphere
• /
• v.31 no.3
• /
• pp.311-326
• /
• 2021

To improve the predictability of high-impact weather phenomena around Seoul, where a larger number of people are densely populated, KMA conducted the intensive observation from 22 June to 20 September in 2020 over the Seoul area. During the intensive observation period (IOP), the dropsonde from NIMS Atmospheric Research Aircraft (NARA) and the radiosonde from KMA research vessel Gisang1 were observed in the Yellow Sea, while, in the land, the radiosonde observation data were collected from Icheon and Incheon. Therefore, in this study, the effects of radiosonde and dropsonde data during the IOP were investigated by Observing System Experiment (OSE) based on Korean Integrated Model (KIM). We conducted two experiments: CTL assimilated the operational fifteen kinds of observations, and EXP assimilated not only operational observation data but also intensive observation data. Verifications over the Korean Peninsula area of two experiments were performed against analysis and observation data. The results showed that the predictability of short-range forecast (1~2 day) was improved for geopotential height at middle level and temperature at lower level. In three precipitation cases, EXP improved the distribution of precipitation against CTL. In typhoon cases, the predictability of EXP for typhoon track was better than CTL, although both experiments simulated weaker intensity as compared with the observed data.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.4
• /
• pp.61-69
• /
• 2019

Accelerated aging test for the double base propellant was carried out at three different temperatures (60, 70, and $75^{\circ}C$) for over a year. To evaluate the aging characteristics of the double base propellant, the stabilizer contents and thermal decomposition kinetics were analyzed by using high performance liquid chromatography (HPLC) and AKTS-Thermokinetics software. As a result, stabilizer contents in the double base propellant gradually decreased according to the aging temperature and aging duration. The consumption rate of 2-NDPA in the accelerated aged propellants showed that it was two times faster at $75^{\circ}C$ in compared with ther rate at $70^{\circ}C$. These experimental values were simulated by the SB kinetic model, and it was shown that the two-step model with constant reaction orders n1=1 and n2=0 best describes the process of the stabilizer depletion for the double base propellant.

• Advances in aircraft and spacecraft science
• /
• v.8 no.4
• /
• pp.345-372
• /
• 2021

The analysis of nonlinear vibrations, buckling, post-buckling, flutter boundary determination and post-flutter behavior of a homogeneous curved plate assuming cylindrical bending is conducted in this article. Other assumptions include simply-supported boundary conditions, supersonic aerodynamic flow at the top of the plate, constant pressure conditions below the plate, non-viscous flow model (using first- and third-order piston theory), nonlinear structural model with large deformations, and application of mechanical and thermal loads on the curved plate. The analysis is performed with constant environmental indicators (flow density, heat, Reynolds number and Mach number). The material properties (i.e., coefficient of thermal expansion and modulus of elasticity) are temperature-dependent. The equations are derived using the principle of virtual displacement. Furthermore, based on the definitions of virtual work, the potential and kinetic energy of the final relations in the integral form, and the governing nonlinear differential equations are obtained after fractional integration. This problem is solved using two approaches. The frequency analysis and flutter are studied in the first approach by transferring the handle of ordinary differential equations to the state space, calculating the system Jacobin matrix and analyzing the eigenvalue to determine the instability conditions. The second approach discusses the nonlinear frequency analysis and nonlinear flutter using the semi-analytical solution of governing differential equations based on the weighted residual method. The partial differential equations are converted to ordinary differential equations, after which they are solved based on the Runge-Kutta fourth- and fifth-order methods. The comparison between the results of frequency and flutter analysis of curved plate is linearly and nonlinearly performed for the first time. The results show that the plate curvature has a profound impact on the instability boundary of the plate under supersonic aerodynamic loading. The flutter boundary decreases with growing thermal load and increases with growing curvature.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.322-340
• /
• 2021

Due to climate change and its consequential spring temperature rise, flowering time of Robinia pseudoacacia has advanced and a simultaneous blooming phenomenon occurred in different regions in South Korea. These changes in flowering time became a major crisis in the domestic beekeeping industry and the demand for accurate prediction of flowering time for R. pseudoacacia is increasing. In this study, we developed and compared performance of four different models predicting flowering time of R. pseudoacacia for the entire country: a Single Model for the country (SM), Modified Single Model (MSM) using correction factors derived from SM, Group Model (GM) estimating parameters for each region, and Local Model (LM) estimating parameters for each site. To achieve this goal, the bloom date data observed at 26 points across the country for the past 12 years (2006-2017) and daily temperature data were used. As a result, bloom dates for the north central region, where spring temperature increase was more than two-fold higher than southern regions, have advanced and the differences compared with the southwest region decreased by 0.7098 days per year (p-value=0.0417). Model comparisons showed MSM and LM performed better than the other models, as shown by 24% and 15% lower RMSE than SM, respectively. Furthermore, validation with 16 additional sites for 4 years revealed co-krigging of LM showed better performance than expansion of MSM for the entire nation (RMSE: p-value=0.0118, Bias: p-value=0.0471). This study improved predictions of bloom dates for R. pseudoacacia and proposed methods for reliable expansion to the entire nation.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.168-176
• /
• 1989

Theoretical analysis of HF chemical laser models are performed through chemical reaction kinetics, gain process and stimulated emission process. A chemical laser of F+$H_2$ nonchain reaction is investigated through V-R transitions of excited HF for vibrational levels up to v = 3 and rate equations including nonchain pumping and deactivation. On this analysis, harmonic and anharmonic vibrational levels are considered separately and the results of the corresponding power calculations are showed very small difference between the two. Output powers are calculated with variation of temperature and initial concentrations of $H_2$. A HF chemical laser of $H_2$+$F_2$ chain reaction is also simulated with a premixed initial condition. Results of present model calculations are satisfactory through comparison with detailed calculations reported by others.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.685-691
• /
• 2017

In this study, the influence of mass flow rate on the isentropic efficiency of the steam turbine nozzle stage is investigated. A realistic three-dimensional numerical model, which is based on the compressible Navier-Stokes equations, is developed for the steam phase. The comprehensive conservation laws and a kinetic model for steam are investigated. With two different models for the three-dimensional geometry of the nozzle stage, the pressure and temperature distributions, velocity, Mach number. and Markov energy loss coefficient are calculated. A maximum efficiency of 96.66％ is found at a mass flow rate of 0.9 kg/s in model A. In model B, a maximum efficiency of 97.32％ is found at a rate of 1.6 kg/s. It is determined that the isentropic nozzle efficiency increases as the Markov energy loss coefficient decreases through a nearly linear relationship.

• Journal of Hydrogen and New Energy
• /
• v.23 no.1
• /
• pp.73-82
• /
• 2012

A 2-dimensional heterogeneous reactor model was developed and simulated for a tube reactor of packed bed where the steam-$CO_2$ combined reforming reaction of natural gas proceeded to produce synthesis gas. Under the reactor feeding rate, 45 $Nm^3$/h, of the reactant gas stream, the 2-dimensional heterogeneous reactor model showed the similar results to those from the ASPEN simulator although there were some discrepancies between the two in the temperature and the $H_2$/CO ratio of the reformed gas at the reactor exit. The calculated enthalpy difference between the reformed gas at the reactor exit and the reactant gas fed to the reactor was closely correspondent to the total amount of heat transferred to the reactor interior from the furnace. This supports that the 2-dimensional heterogeneous reactor model was reasonably established and the numerical solution was properly obtained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.9
• /
• pp.740-753
• /
• 2008

The conventional Split Hopkinson Pressure Bar (C-SHPB) technique with aluminum pressure bars to achieve a closer impedance match between the pressure bars and the specimen materials such as hot temperature degraded POM (Poly Oxy Methylene) and PP (Poly Propylene) to obtain more distinguishable experimental signals is used to obtain a dynamic behavior of material deformation under a high strain rate loading condition. An experimental modification with Pulse shaper is introduced to reduce the nonequilibrium on the dynamic material response during a short test period to increase the rise time of the incident pulse for two polymeric materials. For the dynamic stress strain curve obtained from SHPB experiment under high strain rate, the Johnson-Cook model is applied as a constitutive equation, and we verify the applicability of this constitutive equation to the probabilistic reliability estimation method. The methodology to estimate the reliability using the probabilistic method such as the FORM and the SORM has been proposed, after compose the limit state function using Johnson-Cook model. It is found that the failure probability estimated by using the SORM is more reliable than those of the FORM, and the failure probability increases with the increase of applied stress. Moreover, it is noted that the parameters of Johnson-Cook model such as A and n, and applied stress affect the failure probability more than the other random variables according to the sensitivity analysis.

• KIEAE Journal
• /
• v.15 no.5
• /
• pp.13-20
• /
• 2015

Purpose: In order to upgrade the energy performance of existing building, energy audit stage should be implemented first because it is useful method to find where the problems occur and know how much time and cost consumption for retrofit. In overseas researches, three levels of audit is proposed whereas there are no standards for audit in Korea. Besides, most studies use dynamic simulation in detail like audit level 3 even though the level 2 can save time and cost than level 3. Thus, this paper focused on audit level 2 and proposed the audit method with the simple linear regression analysis model. Method: Two parameters were considered for the simple regression analysis, which were the monthly electric use and the mean outdoor temperature data. The former is a dependent variable and the latter is a independent variable, and the building's energy performance profile was estimated from the regression analysis method. In this analysis, we found the abnormal point in cooling season and the more detailed analysis were conducted about the three heat source equipments. Result: Comparing with real and predicted models, the total consumption of predicted model was higher than real value as 23,608 kWh but it was the results that was reflected the compulsory control in 2013. Consequently, it was analyzed that the revised model could save the cooling energy as well as reduce peak electric use than before.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.149-153
• /
• 1999

Prediction of rice developmental stage is necessary for proper crop management and a prerequisite for growth simulation as well. The objectives of the present study were to find out the relationship between the plastochrone index(PI) and the developmental index(DVI) estimated by non-parametric phenology model which simulates the duration from seedling emergence(DVI=0) to heading(DVI=l) by employing daily mean air temperature and daylength as predictor variables, and to confirm the correspondency of developmental indice to panicle developmental stages based on this relationship. Four japonica rice cultivars, Kwanakbyeo, Sangpungbyeo, Dongjinbyeo, and Palgumbyeo which range from very early to very late in maturity, were grown by sowing directly in dry paddy field five times at an interval of two weeks. Data for seedling emergence, leaf appearance, differentiation stage of primary rachis branch and heading were collected. The non-parametric phenology model predicted well the duration from seedling emergence to heading with errors of less than three days in all sowings and cultivars. PI was calculated for every leaf appearance and related to the developmental index estimated for corresponding PI. The stepwise polynomial analysis produced highly significant square-rooted cubic or biquadratic equations depending on cultivars, and highly significant square-rooted biquadratic equation for pooled data across cultivars without any considerable reduction in accuracy compared to that for each cultivar. To confirm the applicability of this equation in predicting the panicle developmental stage, DVI at differentiation stage of primary rachis branch primordium was calculated by substituting PI with 82 corresponding to this stage, and the duration reaching this DVI from seedling emergence was estimated. The estimated duration revealed a good agreement with that observed in all sowings and cultivars. The deviations between the estimated and the observed were not greater than three days, and significant difference in accuracy was not found for predicting this developmental stage between those equations derived for each cultivar and for pooled data across all cultivars tested.