• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.3
• /
• pp.183-196
• /
• 2010

Increasing human activity due to rapid economic growth and land use change alters the patterns of the Asian monsoon, which is key to crop yields in Asia. In this study, we tested the performance of regional climate model (RegCM3) by simulating important components of Indian summer monsoon, including land-ocean contrast, low level jet (LLJ), Tibetan high and upper level Easterly Jet. Three contrasting rain years (1994: excess year, 2001: normal year, 2002: deficient year) were selected and RegCM3 was integrated at 60 km horizontal resolution from April 1 to October 1 each year. The simulated fields of circulations and precipitation were validated against the observation from the NCEP/NCAR reanalysis products and Global Precipitation Climatology Centre (GPCC), respectively. The important results of RegCM3 simulations are (a) LLJ was slightly stronger and split into two branches during excess rain year over the Arabian Sea while there was no splitting during normal and deficient rain years, (b) huge anticyclone with single cell was noted during excess rain year while weak and broken into two cells in deficient rain year, (c) the simulated spatial distribution of precipitation was comparable to the corresponding observed precipitation of GPCC over large parts of India, and (d) the sensitivity experiment using NIMBUS-7 SMMR snow data indicated that precipitation was reduced mainly over the northeast and south Peninsular India with the introduction of 0.1 m of snow over the Tibetan region in April.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.243-248
• /
• 2015

Cirsium chanroenicum, Cirsium nipponicum, and Cirsium schantarense plants were collected from Changwon, Ulleungdo, and Dooryoon Mountain, respectively. Cirsium japonicum plants were also collected from various locations in Korea. Genomic DNA was prepared from the collected plants and used for amplification of the 18S rDNA, ITS1, 5.8S rDNA, ITS2, and part of 28S rDNA. The ITS1 and ITS2 sequences of the PCR products and from other Cirsium plants reported previously were aligned and compared. Cirsium chanroenicum, Cirsium nipponicum, and Cirsium setidens formed distinct branches on the neighbor-joining tree. Cirsium japonicum and Cirsium pendulum appeared to be close to one another, but Cirsium pendulum plants were clearly clustered in an independent clade. Cirsium shantarense was clustered with the other Cirsium japonicum plants. The most important characteristic that distinguished these two species was the direction of the flowers. All Cirsium japonicum flowers point upward, but Cirsium shantarense flowers point downward. Other than this feature, these two species are almost indistinguishable morphologically. Cirsium chanroenicum is indistinguishable morphologically from Cirsium setidens, but it still formed a distinct group on the neighbor-joining tree based on ITS sequences, suggesting that this species is worth considering as an independent species. Silymarin production of the collected plants was analyzed and appeared to be quite high, indicating that the ability to synthesize silymarin is common to all Cirsium plants analyzed so far.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.4
• /
• pp.329-332
• /
• 1996

This experiment was carried out to investigate the growth characteristics and root yield with different harvesting times in Astragalus membranaceus. The growth of stem diameter. number of nodes. number of branches and dry weight of top plant were not affected in late harvesting time compare to early harvesting time. but stem height was increased by harvesting time. Otherwise root growth were effected by harvesting time in one and two years old plant. So, root length, weight of dry root and dry root yield were the most excellent until reached up to harvesting of 10th November. The content of methanol extract was not different between one and two years old plant, but that of different harvesting time was the most by harvesting time in mid November. It was suggested that the optimal harvesting time seems to be in mid November rather than in mid or late October.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.3
• /
• pp.444-456
• /
• 2000

To test the shear bond strength of a new "one-bottle adhesive" system to primary dentin two commercially available one-bottle adhesives (Prime & Bond NT, Single bond) and conventional three step system(Scotchbond Multi-Purpose Plus) were included for comparison. And We observe the interfacial morphology by scanning electron microscope. 90 primary molar teeth were embedded in acrylic and buccal and lingual surface were polished to 320 grit to create standardized dentin surface for testing. After bonding of composite resin to sample surfaces according to the manufacturer s direction and 1000 times thermocycling in dwell time 30 second, Shear bond strengths of adhesives to dentin were determined using universal testing machine and analyzed by ANOVA test. Another groups of specimens were treated by hydrochloric acid to secure the resin only and those tags were evaluated under SEM for their length and forms and the morphology of the bonding sites were also observed. The result are as follows. 1. Group I(Prime & Bond NT) showed higher shear bond strength than group iI(Single Bond) and III(Scotchbond Multi Purpose Plus) but no statistically significant difference was founded between groups(p>.05). 2. Relating long resin tags of $70-120{\mu}m$ were observed in samples of all groups under SEM. We could observed hybrid layer, resin tag and many lateral branches in every group. But, we observed in group III rare lateral branched than other two group and discontinuous hybrid layer.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1397-1406
• /
• 1996

In this paper, we propose a discrete model of conveyor systems, which is frequently used in flexible manufacturing systems to transfer work-in-process( WIP) between manipulators. In the case where the time required for transferring WIP's between manipulators are greater than that of manufacturing itself, as in many flexible assembly lines, the quantitative model of the transfer systems is needed to analyze the behavior and productivity of the whole manufacturing system. The proposed model is based upon the assumptions that the length of any unit conveyor component is integer multiple of the length of a pallet and hat the transferring speed of the conveyor is constant. Under these assumptions, the observation moments and the length of the conveyor can be quantized. Hence, the state of a conveyor can be represented by two kinds of Boolean variables: one representing the presence of a pallet on each quantize conveyor length and the other representing the mobility of this pallet. The whole conveyor system can be modeling as a network composed of branches and knots based on these two Boolean variables. The proposed modelling method was tested with various conveyor system configurations and showed that the model can be adopted successfully for the simulation of transfer systems and of the piloting of manufacturing processes.

• Journal of Environmental Science International
• /
• v.12 no.11
• /
• pp.1181-1187
• /
• 2003

Hibiscus hamabo, called "Hwang-geun", growing about 3m in height is a deciduous shrub or subtree of Malvaceae. Because the number of these species is very limited in the world, the Ministry of Environment has designated H. hamabo as a preserved plant. The Korea Forest Service also protects it strictly by law since H. hamabo is an out-of-the-way plant and possibly may be exterminated soon in Korea. Investigation for distribution and ecological characteristics of the habitat for H. hamabo was carried out on Soan Island. Two wild H. hamabo were found at the forest edge (equation omitted) along the sea coast located in the southern part of Soan Island and this was the first report in the Korean academic world. These two wild H. hamabos were growing in a naturally inhibited area. The diameters at the base were 12cm and 15cm. The Tree heights were 150cm and 210cm and the number of branches of each wild H. hamabo was 4 and 7. However, the present condition of these plants was not good. Environmental conditions of the naturally inhibited area of H. hamabo were very mild because it is located at the edge of the forest and is always sunny during the daytime since the slope of the inhibited area is facing South. The ground drained very well since the soil was made of gravels and sand. Because the percent of vegetation of the subtree layer where H. hamabo was growing was 40%, the cover degree and sociability of flex crenata trees and Eurya japonica were found to be high. In the naturally inhibited area of H. hamabo, a dominant value of Rubus parvifolius in the lower part of the herb layer was very high and many plants in Compositae, such as Artemisia princeps var. orientalis and Erigeron annuus, were also present. A dominant value of liana, such as Vitis thunbergii var. sinuata, Rosa multiflora, Clematis terniflora and Hedera rhombea, and Gramineae plants that rhizomes were well developed and aggressively propagated, such as Miscanthus sinensis var. purpurascens, Phragmites communis, Spodiopogon cotulifer and Oplismenus undulatifolius which were surveyed as high, too. These results imply that H. hamabo might be exterminated soon through a natural selection if the proper management of the naturally inhibited area of H. hamabo is not conducted continually.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.155-163
• /
• 1997

The Mongolian ger is ideally suited to the mongol's steppe climate and the nomadic way of life. This is a multipurpose dwelling which can be easily collapsed, transported to another place and put up again fully preserving its original shape. The pastoral nomadic ger has two key components: the wooden framework and the felt cover. The wooden parts are the walls(khana), the long poles(un), the smoke escape(toono) and its supports(bagana). One wall consists of 10-15 branches of willow tree. each about 1.5m high bound together in a way making it possible to fold it for transportation and then unfold it like an accordion. The unfolded walls are connected to form a circle. The long poles(un) are fastened to the upper part of the walls, with the other end passed through the toono hole, the only sky window and smoke escape through it from the ger. The toono is propped up by two posts, called bagana. All this forms the wooden framework of the ger, which is covered with felt. When the herders fire up their metal stoves, the temperature inside the ger becomes quite comfortable. Because the nomads live in a climate where there is only one growing season in a year, they do not make long migrations to new pastures. Livestock subsist on standing vegetation for eight months of the year. The basic pasture migration strategy is to leave enough standing vegetation at the end of the growing season in September to suffice until the new growth appears the following May. Mongolians use a type of compressed tea leaf that is called "brick" tea in English because it is rock solid and roughly the shape of a brick. And they consume a larger percent(88%) of fat from animal products such as meat, milk, butter, and cheese than any other people in the world. Milk products made from the milk of sheep, yak, and goats are major foods in the nomad's diet, but they are produced mainly in summer when all the animals are lactating. Mongolians made their special nomadic food culture on the steppe.

• Journal of the Daesoon Academy of Sciences
• /
• v.35
• /
• pp.427-476
• /
• 2020

Park Wudang formally registered Daesoon Jinrihoe in 1969. While it shares ideas and history with other Jeungsanist groups, this paper argues that its organizational profile is unique. The two major institutional structures, the bonbu (headquarters) and the bangmyeon (branch) have together created space for the rapid development of this Korean new religion. The bonbu is a centralized hierarchy, while the bangmyeon exhibits the strong loyalty and cohesiveness of the clan. Running throughout both structural forms is the lineage concept, which is conceived here as an articulating paradigm able to operate in different organizational forms. This finely-balanced institutional structure makes a major contribution to Daesoon Jinrihoe's ability to fulfill its religious mission. The first side of this balance is the headquarters, which includes the core organization based in Yeoju as well as some outside temples and training centers. All of these were established under the direction of the Lord of Principle, the Dojeon, Park Wudang. Park Wudang also fixed the Dao Constitution, the Doheon, which serves as a blueprint for governance. From the Central Council to the various institutions for propagation, guidance, and auditing, current management practices conform closely to Park Wudang's organization vision. The second aspect of Daesoon Jinrihoe's organization is the branch structure. The larger branches, such as Yeongwol and Geumreung, are complex organizations in their own rights. The paper concludes by characterizing the two major axes of headquarters and branch as organizational types. Using Robert Quinn and Kim Cameron's institutional typology, the paper concludes that the bonbu is a classic centralized hierarchy with its focus on efficiency. The bangmyeon, in contrast, with its high level of group identity and spirit, comes approximates the clan institutional structure.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.531-536
• /
• 2011

This study was conducted to investigate the effects of cultural soil textures on growth and quality of Glycyrrhiza uralensis Fischer from 2009 to 2010. The obtained results from this study were summarized as follows; The growth of stem and leaf were superior to one year old G. uralensis, and surface runner and root growth tended to be better in 2 years old G. uralensis. The weight of stem and leaf were heavy in sandy loam, and plant height, branches, stem diameter in sandy clay loam were better than other soil texture. The growth characteristics, such as length, number and weight of surface runner, was better in order of sandy clay loam > sandy loam > loamy sand. The length of main and lateral root was longer in loamy sand soil than other treatments, and the diameter of main and lateral root was more thicker in sandy loam than others. The number of lateral root was higher in the sandy loam than other treatments. The yield of main and lateral root was in order of sandy loam > sandy clay loam > loamy sand soil. Marketable root yield of one year old and two year old G. uralensis were increased 57% and 71% in sandy loam compare to a loamy sand as 204 kg/10 a, respectively. The content of glycyrrhizinic acid was the hightest as 1.62% in sandy clay loam soil in one year old, and as 1.58% in sandy loam soil in two years old of G. uralensis, respectively.

• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.150-157
• /
• 2024

In this paper, we propose a novel algorithm for predicting the number of apples on an apple tree using a deep learning-based object detection model and a polynomial regression model. Measuring the number of apples on an apple tree can be used to predict apple yield and to assess losses for determining agricultural disaster insurance payouts. To measure apple fruit load, we photographed the front and back sides of apple trees. We manually labeled the apples in the captured images to construct a dataset, which was then used to train a one-stage object detection CNN model. However, when apples on an apple tree are obscured by leaves, branches, or other parts of the tree, they may not be captured in images. Consequently, it becomes difficult for image recognition-based deep learning models to detect or infer the presence of these apples. To address this issue, we propose a two-stage inference process. In the first stage, we utilize an image-based deep learning model to count the number of apples in photos taken from both sides of the apple tree. In the second stage, we conduct a polynomial regression analysis, using the total apple count from the deep learning model as the independent variable, and the actual number of apples manually counted during an on-site visit to the orchard as the dependent variable. The performance evaluation of the two-stage inference system proposed in this paper showed an average accuracy of 90.98% in counting the number of apples on each apple tree. Therefore, the proposed method can significantly reduce the time and cost associated with manually counting apples. Furthermore, this approach has the potential to be widely adopted as a new foundational technology for fruit load estimation in related fields using deep learning.