• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.143-149
• /
• 2022

Since patent documents contain detailed results of research and development technologies, many studies on various patent analysis methods for effective technology analysis have been conducted. In particular, research on quantitative patent analysis by statistics and machine learning algorithms has been actively conducted recently. The most used patent data in quantitative patent analysis is technology keywords. Most of the existing methods for analyzing the keyword data were models based on the Gaussian probability distribution with random variable on real space from negative infinity to positive infinity. In this paper, we propose a model using gamma probability distribution to analyze the frequency data of patent keywords that can theoretically have values from zero to positive infinity. In addition, in order to determine the regression equation of the gamma-based regression model, two-mode network is constructed to visualize the technological association between keywords. Practical patent data is collected and analyzed for performance evaluation between the proposed method and the existing Gaussian-based analysis models.

• The Korean Journal of Applied Statistics
• /
• v.21 no.1
• /
• pp.81-94
• /
• 2008

Family-based tests such as the transmission and disequilibrium tests(TDT) have proved to be powerful tools in the search for disease genes. Unlike case-control studies, the tests are not affected by population admixture, which can lead to spurious association of multiple highly linked makers with disease-susceptible genes. Those tests have largely required knowledge of parental marker genotypes. However, parental data are often not available for late-onset diseases. In this article we propose sib-TDTs that overcome this problem by use of marker data from unaffected sib(s) instead of parents. To do this end, we fist defined a Mantel-Haenszel-type statistic for each haplotype and then proposed two tests based on this statistic. Simulation studies suggest that the proposed tests are robust to population admixture and are monotone increasing as a relative risk increases irrespective of mode of inheritance. We also illustrated the proposed tests with data adopted from Yonsei Cardiovascular Genome Center.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.4
• /
• pp.266-274
• /
• 2024

In this paper, we designed a low-area 32-bit PF (Poly-fuse) OTP IP, a non-volatile memory that stores data required for analog circuit trimming and calibration. Since one OTP cell is constructed using two PFs in one select transistor, a 1cell-2bit multibit PF OTP cell that can program 2bits of data is proposed. The bitcell size of the proposed 1cell-2bit PF OTP cell is 1/2 of 12.69㎛ × 3.48㎛ (=44.161㎛2), reducing the cell area by 33% compared to that of the existing PF OTP cell. In addition, in this paper, a new 1 row × 32 column cell array circuit and core circuit (WL driving circuit, BL driving circuit, BL switch circuit, and DL sense amplifier circuit) are proposed to meet the operation of the proposed multbit cell. The layout size of the 32bit OTP IP using the proposed multibit cell is 238.47㎛ × 156.52㎛ (=0.0373㎛2) is reduced by about 33% compared that of the existing 32bit PF OTP IP using a single bitcell, which is 386.87㎛ × 144.87㎛ (=0.056㎛2). The 32-bit PF OTP IP, designed with 10 years of data retention time in mind, is designed with a minimum programmed PF sensing resistance of 10.5㏀ in the detection read mode and of 5.3 ㏀ in the read mode, respectively, as a result of post-layout simulation of the test chip.

• Computers and Concrete
• /
• v.19 no.6
• /
• pp.725-736
• /
• 2017

This paper presents the two-, three-, and four-lane transverse reduction factor based on FEA method, probability theory, and the recently actual traffic flow data. A total of 72 composite girder bridges with various spans, number of lanes, loading mode, and bridge type are analyzed with time-varying static load FEA method by ANSYS, and the probability models of vehicle load effects at arbitrary-time point are developed. Based on these probability models, in accordance to the principle of the same exceeding probability, the multi-lane transverse reduction factor of these composite girder bridges and the relationship between the multi-lane transverse reduction factor and the span of bridge are determined. Finally, the multi-lane transverse reduction factor obtained is compared with those from AASHTO LRFD, BS5400, JTG D60 or Eurocode. The results show that the vehicle load effect at arbitrary-time point follows lognormal distribution. The two-, three-, and four-lane transverse reduction factors calculated by using FEA method and probability respectively range between 0.781 and 1.027, 0.616 and 0.795, 0.468 and 0.645. Furthermore, a correlation between the FEA and AASHTO LRFD, BS5400, JTG D60 or Eurocode transverse reduction factors is made for composite girder bridges. For the two-, three-, and four-lane bridge cases, the Eurocode code underestimated the FEA transverse reduction factors by 27%, 25% and 13%, respectively. This underestimation is more pronounced in short-span bridges. The AASHTO LRFD, BS5400 and JTG D60 codes overestimated the FEA transverse reduction factors. The FEA results highlight the importance of considering span length in determining the multi-lane transverse reduction factors when designing two-lane or more composite girder bridges. This paper will assist bridge engineers in quantifying the adjustment factors used in analyzing and designing multi-lane composite girder bridges.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.3
• /
• pp.136-144
• /
• 2023

PURPOSE. The study objective was to evaluate the influence of the type of resin cement on the flexural strength and load to fracture of two chairside CADCAM materials after aging. MATERIALS AND METHODS. A polymer-infiltrated ceramic network (PICN) and a nanoceramic resin (RNC) were used to produce the specimens. Two types of dual-cure resin cements, a self-adhesive and a universal, were investigated. Bilayer specimens were produced (n = 10) and aged for 6 months in a humid environment before the biaxial flexural strength test (σ_f). Bonded specimens were subjected to a mechanical aging protocol (50 N, 2 Hz, 37℃ water, 500,000 cycles) before the compressive load test (L_f). σ_f and L_f data were analyzed using two-way ANOVA and Tukey tests (α = .05). Chi-square test was used to analyze the relationship between failure mode and experimental group (α = .05). RESULTS. The type of resin cement and the interaction between factors had no effect on the σ_f and L_f of the specimens, while the type of restorative material was significant. RNC had higher σ_f and L_f than PICN. There was a significant association among the type of cracks identified for specimens tested in L_f and the restorative material. CONCLUSION. The type of resin cement had no effect on the flexural strength and load to fracture of the two investigated CAD-CAM chairside materials after aging.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.79-80
• /
• 2014

Most of marine pollution have been occurred by oil spill accidents resulted from ship accidents in South Korea. This year there were two large oil spill accidents: the Yeosu Oil Spill Accident (2014.01.31.(Fri.) 09:35 LT) and the Captain Vangelis L. Oil Spill Accident (2014.02.15.(Sat.) 14:00 LT). In general, Synthetic Aperture Radar (SAR) is used in monitoring and detection of oil dumping and spilled oils by accident at sea. Therefore it is expected that KOMPSAT-5, launched successfully last year, will take part in that mission during a normal operation mode. After the two accidents, high spatial resolution optical satellite data including KOMPSAT-3 were acquired February 2 and 14, 2014. In this presentation, we analyzed optical properties of spilled oils from optical satellite imagery to estimate the spilled area and the volume at each region. Finally, a satellite application planning for ocean surveillance in South Korea will be presented.

• Smart Structures and Systems
• /
• v.4 no.1
• /
• pp.1-17
• /
• 2008

This study proposes a conceptual framework of in-situ vibration tests and analyses for quality appraisal of non-slender, cast-in-place piles with irregular cross-section configuration. It evaluates a frequency index from vibration recordings to a series of impulse loadings that is related to total soil-resistance forces around a pile, so as to assess if the pile achieves the design requirement in terms of bearing capacity. In particular, in-situ pile-vibration tests in sequential are carried out, in which dropping a weight from different heights generates series impulse loadings with low-to-high amplitudes. The high-amplitude impulse is designed in way that the load will generate equivalent static load that is equal to or larger than the designed bearing capacity of the pile. This study then uses empirical mode decomposition and Hilbert spectral analysis for processing the nonstationary, short-period recordings, so as to single out with accuracy the frequency index. Comparison of the frequency indices identified from the recordings to the series loadings with the design-based one would tell if the total soil resistance force remains linear or nonlinear and subsequently for the quality appraisal of the pile. As an example, this study investigates six data sets collected from the in-situ tests of two piles in Taipu water pump project, Jiangshu Province of China. It concludes that the two piles have the actual axial load capacity higher than the designed bearing capacity. The true bearing capacity of the piles under investigation can be estimated with accuracy if the amplitude of impact loadings is further increased and the analyses are calibrated with the static testing results.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.1
• /
• pp.1-18
• /
• 2008

We present a detailed period analysis for the F-type primary of ${\in}$ Aurigae by means of Fourier and wavelet algorithm. After collecting all available data which have been observed for around 160 years (1842 - 2006) from various international databases and published references we selected only data obtained during outside eclipse among them again. As a result of analysis using CLEANest and WWZ(weighted wavelet Z-transform) several frequencies including two clear periods ($67^d\;and\;123^d$) were found. In contrast to previous results that the periods vary irregularly it seems that the primary of ${\in}$ Aurigae is double mode or multiperiodic pulsator. The presence of the two periods and their ratio indicates that the high-mass interpretation of the variable could be valid. Also better understanding of the mechanisms driving the light variability of F-type supergiant stars requires continual series of photometric and radial velocity measurements in outside eclipse of this star.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.273-279
• /
• 2023

The use of line memory is essential for image filtering in image processing hardware. After input data is stored in line memory, filtering is performed after synchronization to use the stored data. A sync generator is used for synchronization, and in the case of a conventional sync generator, the input sync signal is delayed by one row of the input image. If a signal delayed by two rows is required, it is necessary to connect two modules. This approach increases the size of the hardware and cannot be designed efficiently. In this paper, we propose a sync generator that generates multiple types of delayed signals by adding a finite state machine. The hardware design was coded in Verilog HDL, and performance is verified by applying it to image processing hardware using field programmable gate array board.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.109-118
• /
• 2006

A case study bas been conducted to explore design activities of four expert designers through protocol analysis, We examined relations among design information, process patterns and solution qualities with two complementary coding schemes based on design contents and design process, Relation between personal creativity modes and design activities has been examined as well. Regarding design process, an adequate distribution of activities in process may be necessary to bring out a good solution. It seemed that the more design contents about context, external knowledge, and general feature are used, the more unique design concepts are made. Regarding personal creativity modes, not much of differences in that design activity were observed while only a few relations between designer's personality and design activity were observed. The fact that the designers participated are all experienced designers could explain this. Investigation on the differences between novice designers and expert designer reflected in protocol data based on design information and design process coding scheme is to be done. Also, how personal process patterns observed through this protocol analysis can be utilized in composing design team.