• 정보처리학회논문지C
• /
• 제13C권2호
• /
• pp.177-184
• /
• 2006

핸드오버는 이동통신 단말기가 기지국과 기지국 사이를 이동해도 끊김없이 데이터 송수신이 가능하도록 해주는 기술이다 핸드오버 종류는 크게 두 가지로 구분되는데 네트워크 링크의 변경 없이 라디오 링크 연결만 변경되는 것을 수평(horizontal) 핸드오버라 하고, 서로 다른 네트워크 환경을 이동하는 것을 수직(vertical) 핸드오버로 정의할 수 있다. 본 논문은 SDR(Software Defined Radio)을 기반으로 W-CDMA망과 WiBro망을 동시에 지원하는 기지국내에서의 수직 핸드오프 프로토콜을 제안하고, 제안된 프로토콜을 상태천이도 및 페트리 넷을 이용하여 검증하고 또한 NS-2 시뮬레이터를 이용하여 제안된 프로토콜의 성능을 평가하였다

• 대한원격탐사학회지
• /
• 제33권1호
• /
• pp.47-60
• /
• 2017

The permafrost active layer plays an important role in permafrost dynamics. Ecological patterns, processes, and water and ice contents in the active layer are spatially and temporally complex depending on landscape heterogeneity and local-scale variations in hydrological processes. Although there has been emerging interest in the application of optical remote sensing techniques to permafrost environments, optical sensors are significantly limited in accessing information on near surface geo-cryological conditions. The primary objective of this study was to investigate capability of L-band SAR data for monitoring spatio-temporal variability of permafrost ecosystems and underlying soil conditions. This study exploits information from different polarimetric SAR observables in relation to permafrost environmental conditions. Experimental results show that each polarimetric radar observable conveys different information on permafrost environments. In the case of the dual-pol mode, the radar observables consist of two backscattering powers and one correlation coefficient between polarimetric channels. Among them, the dual-pol scattering powers are highly sensitive to freeze/thaw transition and can discriminate grasslands or ponds in thermokarst area from other permafrost ecosystems. However, it is difficult to identify the ground conditions with dual-pol observables. Additional backscattering powers and correlation coefficients obtained from quad-pol mode help understanding seasonal variations ofradar scattering and assessing geo-cryological information on soil layers. In particular, co-pol coherences atHV-basis and circular-basis were found to be very usefultools for mapping and monitoring near surface soil properties.

• 전자공학회논문지A
• /
• 제28A권11호
• /
• pp.866-873
• /
• 1991

In this paper the electric and magnetic field distributions in a TEM cell used for EMC testing are analyzed numerically. The fields are distorted with the increase of frequency. These distortions are due to higher order modes and resonances and cause the bandwidthe limitations in the uae of TEM cels. The upper frequency is lower modes however, are reflected at some points through the tapered ends of the cell. Higher order modes however, are reflected at some points within the tapered region where it becomes too small to support the modes, The first two TE mode(TE$_{01}$ and TE$_{10}$) cutoff frequencies and the first six TE$_mnp$ resonant ferquencies are identified in a TEM cell (1x0 6x2m,w=0.72m) from field patterns and the results are consistent with others' data. The circumferential wall currents to support resonances are shown. For the large cell it is desired to extend the usable frequency range above the cutoff frequency of the first higher order mode. This study proposes an attempt to expand the frequency bandwidth by a resonance suppression.

• 대한전자공학회논문지TC
• /
• 제37권6호
• /
• pp.396-396
• /
• 2000

두 개의 마이크로 스트립 선로를 이용하여 결합한 유전체 공진기를 유한 차분 시간 영역(FDTD)법을 적용하여 3차원 해석을 하였다. 유전체 공진기의 표면은 곡면으로서, Noriaki model을 이용하여 정확하게 모델링 하였다. 일반적인 FFT에 의해 106.46 MHz의 주파수 해상도를 얻었지만 공진 주파수를 결정할 수가 없다. 따라서 1.00 MHz의 높은 주파수 분해능을 갖기 위해서 Pad 근사법과 Stoer-Bulirsch법을 적용하고 측정치와 비교하였다. 그 결과 Pad 근사법을 통하여 매우 정확한 공진주파수를 얻었다. 그리고 정현파를 인가하여 전자계 분포를 도시하였으며, 공진 모드가 $TE_{01{\delta}}$ 모드임을 알 수 있었다.

• 대한전자공학회논문지TC
• /
• 제37권6호
• /
• pp.36-43
• /
• 2000

두 개의 마이크로 스트립 선로를 이용하여 결합한 유전체 공진기를 유한 차분 시간 영역(FDTD)법을 적용하여 3차원 해석을 하였다. 유전체 공진기의 표면은 곡면으로서, Noriaki model을 이용하여 정확하게 모델링 하였다. 일반적인 FFT에 의해 106.46 MHz의 주파수 해상도를 얻었지만 공진 주파수를 결정할 수가 없다. 따라서 1.00 MHz의 높은 주파수 분해능을 갖기 위해서 Pad 근사법과 Stoer-Bulirsch법을 적용하고 측정치와 비교하였다. 그 결과 Pad 근사법을 통하여 매우 정확한 공진주파수를 얻었다. 그리고 정현파를 인가하여 전자계 분포를 도시하였으며, 공진 모드가 TE/sub 01δ/ 모드임을 알 수 있었다.

• 한국레이저가공학회지
• /
• 제2권3호
• /
• pp.11-18
• /
• 1999

This paper describes the weldability of carbon steel and stainless steel using 5㎾ $CO_2$ laser system with nearly multi-mode beam and a parabolic focusing mirror. In the laser welding of steels, major welding parameters are focal point, travel speed, beam power, shield gas and gap tolerance, etc.. Two kinds of gases(Ar, He) were used as a assist gas and supplied through the external nozzle. It is very important for optimum condition to remove plasma plume which absorbs laser beam and to obtain deep penetration and sound weld bead. Bead-on-plate welding tests were carried out for the experiments. Penetration data were obtained with various welding parameters and the effects of welding parameters were discussed. Butt welding tests were performed with various conditions. Only the optimum laser parameters assured good weld quality As a result of this study, We achieve the fundamental weldabilities using a high power $CO_2$ laser for carbon steel and stainless steel.

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.381-388
• /
• 2018

Dynamic behaviour of beam carrying masses has attracted attention of many researchers and engineers. Many studies on the analytical solution of beam with concentric tip mass have been published. However, there are limited works on vibration analysis of beam with an eccentric three dimensional object. In this case, bending and torsional deformations of beam are coupled due to the boundary conditions. Analytical solution of equations of motion of the system is complicated and lengthy. Therefore, in this study, Differential Transform Method (DTM) is applied to solve the relevant equations. First, the Timoshenko beam with 3D tip attachment whose centre of gravity is not coincident with beam end point is considered. The beam is assumed to undergo bending in two orthogonal planes and torsional deformation about beam axis. Using Hamilton's principle the equations of motion of the system along with the possible boundary conditions are derived. Later DTM is applied to obtain natural frequencies and mode shapes of the system. According to the relevant literature DTM has not been applied to such a system so far. Moreover, the problem is modelled by Ansys, the well-known finite element method, and impact test is applied to extract experimental modal data. Comparing DTM results with finite element and experimental results it is concluded that the proposed approach produces accurate results.

• 한국음향학회지
• /
• 제20권5호
• /
• pp.54-60
• /
• 2001

본 논문에서는 휴대폰용 부저, 진동자 기능이 하나의 소자로 통합된 다기능 복합소자의 특성을 해석하기 위한 등가회로 해석법을 연구하였다. 전형적인 복합소자 제품에 대하여 부저, 진동 모드에 각각에 대한 등가회로를 구성하여 그 특성을 계산하였다. 이를 위해 우선 복합소자의 각 모드에 대한 동작원리를 규명하고, 그 원리에 따른 등가회로를 구성하여 복합소자의 동작특성을 시뮬레이션 할 수 있는 해석툴을 완성하였다. 해석법의 타당성은 그 결과를 실험결과와 비교함으로써 밝혔고, 계산 결과와 실제 측정결과가 잘 일치함을 알 수 있었다.

• Journal of Contemporary Eastern Asia
• /
• 제17권1호
• /
• pp.68-93
• /
• 2018

With the emergence of partnerships with private actors in public and cultural diplomacies, complexity in the relations among the various stakeholders involved has arisen, and yet the relevant research is insufficient to shed any beneficial light on such issues. By looking at public-private partnerships, the present study determined that resource dependence, trust, and risk are the main factors affecting the feasibility of partnerships, and inductively developed propositions on their effects. In an explorative case study, Germany (decentralized mode of governance) and South Korea (centralized mode of governance) were compared as exemplary contrasting system designs. The results revealed that risk and trust are likely to affect the feasibility of partnerships, whereas resource dependence is not. The following additional findings also were made: (1) there are cultural actors in a 'for profit, but with non-profit purposes' sector; (2) an interpersonal level of trust positively affects partnerships; (3) 'taking risks' brings about 'innovation'; (4) the existence of international commonalities between any two cases depending on the actors' shared role, whether public or private; (5) public actors' emphasis on mutual trust, program budget and execution, innovations coming from taking risks, commitment and ownership, and unexpected situations; (6) private actors' consideration of 'publicness' and grant-seeking or financial support as important incentives, and their desire that public actors to show more trust, professionalism, and ownership with less control over budget execution. With its qualitative approach and in-depth analysis, the present study yielded new insights, notwithstanding the relatively small sample data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.504-504
• /
• 2000

The flow ratio in the industrial process is usually accomplished by using PID controller with series type ratio. But always the large overshoot and a long rise time may be achieved from this conventional control. These problems are involved to the inexact flow ratio control. In order to avoid this poor performance. the paper presents a designing of the two controller modes for the flow ratio plants. This proposed controller combine the lookup table technique and the well-known PID controller to obtain the fast response and low overshoot of flow ratio control. The PID controller mode will be operated when the flow ratio reaches the preset value while the lookup table technique mode is applied for initial operation. The data in tile table is calculated by the valve sizing equation and convened to the valve position control signal. The experimental results show that the transient and steady state responses of the control systems using the proposed technique can be efficiently obtained when compared with tile conventional controller.