• 제목/요약/키워드: Turn-on

검색결과 5,417건 처리시간 0.032초

건설 프로젝트 초기단계에서의 클레임 방지를 위한 클레임 요인 영향도 분석에 관한 연구 - 턴키공사 사레 중심으로 - (A Study on Analyzing Effect of Claim Factoy to Prevent Claim in Early Stage for Construction Project - Focusing on Turn-Key Project -)

  • 윤준선;서춘택
    • 한국중재학회지:중재연구
    • /
    • 제15권1호
    • /
    • pp.95-112
    • /
    • 2005
  • In the inner turn key constructions the problems of uniform types are repeatedly occurred, and, especially, many problems happen up to the stage of pre-construction(from a bid to a contract) owing to the specialties of the turn key constructions. So the claim factors of the Korean turn key constructions were abstracted in antecedent paper. When the technicians meeting the interior turn key constructions for the first time and working here now are well acquainted with only these factors, many claims will be prevented. By analysing the degree of claims by claims factors through the questionnaires to the experts about the abstracted factors and surveying the amount of the claims through the case studies, what factors exerted how much of influence on the claims was tested and analyzed. Studying and Managing the factors affecting the claims much led the technicians in charge of internal turn key constructions to the prevention and the proper solution of the site claims.

  • PDF

Automatic Turn-off Angle Control for High Speed SRM Drives

  • Nashed Maged N.F.;Ohyama Kazuhiro;Aso Kenichi;Fujii Hiroaki;Uehara Hitoshi
    • Journal of Power Electronics
    • /
    • 제7권1호
    • /
    • pp.81-88
    • /
    • 2007
  • This paper presents a new approach to the automatic control of the turn-off angle used to excite the Switched Reluctance Motor (SRM) employed in electric vehicles (EV). The controller selects the turn-off angle that supports and improves the performance of the motor drive system. This control scheme consisting of classical current control and speed control depends on a lookup table to take the best result of the motor. The turn-on angle of the main switches of the inverter is fixed at $0^{\circ}C$ and the turn-off angle is variable depending on the reference speed. The motor, inverter and control system are modeled in Simulink to demonstrate the operation of the system.

4.5kV/1.5kA급 IGCT 설계 및 특성분석 (Design of 4.5kV/1.5kA IGCT)

  • 김형우;김상철;서길수;김은동
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
    • /
    • pp.357-360
    • /
    • 2003
  • In this paper, we designed 4.5kV/1.5kA IGCT devices. GCT thyristor has many superior characteristics compared with GTO thyristor, for examples; snubberless turn-off capability, short storage time, high turn-on capability, small turn-off gate charge and low total power loss of the application system containing device and peripheral parts such as anode reactor and snubber capacitance. In this paper we designed GCT thyristor devices, and analyzed static and dynamic characteristics of GCT thyristor depending on the minority carrier lifetime, n-base thickness and doping concentration of n-base region, respectively. Especially, turn-on and turn-off characteristics are very important characteristics for GCT thyristor devices. So, we considered above characteristic for design and analysis of GCT devices.

  • PDF

전력용 트랜지스터의 직렬연결시 스윗칭 특성 (The Switching Characteristics of Series-Connected Power Transistors)

  • 서범석;이택기;현동석
    • 대한전기학회논문지
    • /
    • 제41권6호
    • /
    • pp.600-606
    • /
    • 1992
  • The series connection of power switching semiconductor elements is essential when a high voltage converter is made, so researches are being conducted to further develop this technology. In the series connection of power switching semiconductor elements, the main problem is that simultaneous conduction at turn-on and simultaneous blocking at turn-off together with voltage balancing are unattainable because of the difference of their switching characteristics. In this paper a novel series connection algorithm is proposed, which can implement not only the synchronization of the points of turn-on and turn-off time but the dynamic voltage balancing in spite of the difference of each switching characteristics. The proposed method is that the compensated control signal is attained from the voltage feedback signal and applied to the series-connected power transistors independently. Computer simulation and experimental results verify its validity.

  • PDF

첨단교통정보시스템의 최적경로 알고리즘 개발 (Development of Optimal Path Algorithm for Advanced Traveler Information System)

  • 김성수;차영민
    • 산업기술연구
    • /
    • 제21권A호
    • /
    • pp.241-249
    • /
    • 2001
  • The objective of this paper is to develop the optimal path algorithm for dynamic route guidance system in advanced traveler information system (ATIS). The travel time is forecasted in each path between network nodes. Floyd-Warshall algorithm is used to find the optimal route based on this forecasted travel time in dynamic traffic network. This algorithm is modified to apply the real traffic network that has left-turn restriction, U-turn, and P-turn. A big value is assigned to one of arcs in turn restriction and a virtual node is used to consider U-turn and P-turn for Floyd-Warshall algorithm.

  • PDF

비보호좌회전 신호체계운영에 따른 좌회전 대기행렬분석에 관한 연구 (A Study on Left-turn Queues Analysis using Queueing Theory under Permissive Left-turn Signal System)

  • 김갑수;정자영
    • 대한토목학회논문집
    • /
    • 제31권5D호
    • /
    • pp.663-669
    • /
    • 2011
  • 본 연구에서는 좌회전베이가 있는 신호교차로에서 비보호좌회전 신호체계운영에 따른 적정 좌회전 대기차로 길이를 산정하였다. 대기행렬이론을 이용한 시뮬레이션 분석을 통하여 좌회전 대기차로 길이를 산정하였다. 교통량은 교통안전시설실무편람의 비보호좌회전 시행기준에 준거하였으며, 각각의 좌회전 도착률, 서비스율, 좌회전 평균 대기시간, 녹색시간동안 평균대기차량대수, 적색시간동안 평균대기차량대수, 주기당 평균대기차량대수를 구하였다. 본 연구의 결과로 좌회전베이가 있는 신호교차로에서 비보호좌회전으로 운영될 경우 얼마나 충분한 좌회전 대기공간이 확보되어야 하는지 알아보고, 비보호좌회전 신호체계운영에 따른 좌회전 대기차로 길이 산정에 대한 방법론을 대기행렬이론을 이용하여 제시하고자 하였다.

위성의 Dual-Spin Turn 방법 분석 및 자세획득 (Investigation of Dual-Spin Turn and Attitude Acquisition of Satellite)

  • 서현호;이승우
    • 한국항공우주학회지
    • /
    • 제34권2호
    • /
    • pp.36-47
    • /
    • 2006
  • 인공위성에서 자세획득을 위해 기동을 하거나 이상상태 발생으로 위성이 임무를 수행하지 못하여 결국에 위성을 잃어버리게 되는 Flat Spin 상태에서 자세를 복구하는 방안인 Dual Spin Turn의 원리에 대한 연구가 수행되었다. Dual Spin Turn 현상에서 중요한 모멘텀 전달 원리를 물리적으로 명확하게 설명하였다. 그리고 기존의 연구결과에서 많이 알려진 방법을 포함하여 일반적인 위성의 관성모멘트 조건과 모멘텀 휠의 회전 방향 등을 여러 가지로 변화시켜 보면서 타당성을 검증하였다. Dual Spin Turn 과정은 개루프 제어와 에너지 감쇄장치의 도입이라는 2단계 제어방법을 이용하여 여러 경우에 대해 시뮬레이션으로 분석해보았다. 또한 제어의 타당성을 입증하기 위해 2단계 제어 이후의 안정성에 대해 검증하였다. 그리고 Dual Spin Turn을 이용하여 Flat Spin Recovery를 수행하는 시나리오를 예제로 제시하였다.

프로젝트 초기 단계에서의 분쟁방지를 위한 분쟁요인 추출에 관한 연구 - 턴키공사 사례 중심으로 - (A Study of Abstracting Dispute Factor to Prevent Dispute in Early Stage for Construction Project - Focusing on Turn-Key Project -)

  • 윤준선;권기범;서춘택;백준홍
    • 한국중재학회지:중재연구
    • /
    • 제14권1호
    • /
    • pp.315-344
    • /
    • 2004
  • Although we try to increase the order of turn key construction for the international competitiveness strengthening, the construction quality advancement and the productivity enhancement of the public sectors, the problems of the domestic turn key systems are causing the hardships of all the participants and many possible disputes. The home turn key constructions have been activated since 1997. A lot of trial and error had been experienced in these days, and the turn key systems have been changed little by little. But the bases are continuously kept because of their reflecting all the participants' opinions. In the inner turn key constructions the problems of uniform types are repeatedly occurred, and, especially, many problems happen up to the stage of early stage owing to the specialties of the turn key construction. So the dispute factors of the Korean turn key constructions were abstracted through the literature searches, the site document examinations, the case studies and the interviews with the experts. When the technicians meeting the interior turn key construction for the first time and working here now are well acquainted with only these factors, many disputes will be prevented.

  • PDF

U-Turn을 이용한 간선도로 운영방안 (A Study on the Operational Method of Urban Arterial With U-Turn)

  • 박용진;손한철
    • 대한교통학회지
    • /
    • 제18권1호
    • /
    • pp.17-26
    • /
    • 2000
  • 본 연구의 목적은 간선도로에서 좌회전 이동류 처리를 위한 효율적인 U-turn운영방안을 제시하는 것이다. 본 연구에서는 간선도로상에 보행자 횡단보도가 있는 경우 보행자 횡단보도 앞 U-turn 전용차선에서 U-turn을 허용하는 대안과 보행자 횡단보도가 없는 경우 간선도로상에 위치한 인접교차로 U-turn전용차선에서 U-turn을 허용하는 대안에 대하여 U-turn이동류의 효율적인 운영방안을 제시한다. 본 연구는 주도로가 5차선인 주 간선도로를 대상으로 모의 실험한 연구로서 좌회전 이동류가 인접교차로에서 U-turn을 하는 경우에는 주도로 좌회전 교통량이 400대/시까지는 U-turn을 이용하는 것이 효율적으로 분석되었으며 좌회전 교통량이 400대/시 이상에서는 주도로와 부도로의 좌회전 교통량과 주도로의 직진 교통량 변수들과의 조합으로 U-Turn운영방안의 기준을 제시하였다. 또한 보행자 횡단보도가 있어 주도로 혹은 부도로의 좌회전 이동류가 보행자 횡단보도에서 전용 U-turn차선을 이용하여 U-turn하는 방안은 기존의 방식보다 효율적인 것으로 분석되었다. 주도로 좌회전 이동류와 부도로 좌회전 이동류를 위한 U-turn운영방안은 대부분의 좌회전 교통량 범위에서 주도로 좌회전 이동류를 U-turn으로 운영하는 방안이 부도로 좌회전 이동류를 U-turn으로 운영하는 방안보다 효율적인 것으로 분석되었다. 단, 부도로 좌회전 교통량이 많고 주도로 좌회전 교통량이 적은 교통량 범위에서는 간선도로의 효율성에 큰 차이가 나지 않는 것으로 분석되어 그 기준을 주도로와 부도로 좌회전 교통량의 변수조합에 의해 기준이 제시되었다. 대상이 될 필요가 있는 것으로 판단된다. 통과교통도 규제의 대상이 되기 때문에 구역을 범위를 설정할 때 구역 주변도로의 교통상황을 신중하게 고려해야 할 것으로 판단된다. 각 링크에서 오후에 조사된 실제교통량을 링크 관측교통량으로 사용하였다. 분석결과 유전알고리듬을 이용한 최소자승법을 통해 얻은 결과가 Gradient method를 통해 얻은 결과에 비해 우수한 것으로 나타났다. 있는 엄마가, 교육정도가 낮고 경제적으로 가난한 위치에 있는 어머니보다 아이들 체위에 훨씬 좋게 기를 수 있다는 것을 알았다. 특히 이유기에 들어간 6개월 이후에 체위 격차가 심한 것을 볼 때 보충해 주는 음식물의 적절한 보급이 얼마나 필요한가를 말해 주는 것이며 이에는 어머니의 교양과 열의와 경제적 뒷받침이 얼마나 필요하다는 것을 말해주는 것이다. 지역별로 서울에서 부유층 가정과 학교 아동, 농촌 지역 가정과 학교아동, 강원도 산간지역 가정과 학교 아등으로 나누어서 자라나는 아동들의 체위와 이학적 소친을 연구 조사한 바로는 서울 부유층이 제일 좋고 그 다음이 서울 빈한층, 강원도 산간지역 아동의 순으로 좋았으며 농촌지역 아종은 체위가 가장 떨어졌다. 구각증, 구내염등은 강원도 산간지역 아동에 제일 많고, 다음이 농촌지역, 서울 판자촌지역의 순으로 많으며 서울부유충지역이 가장 적어서 이는 산간일수록 또 는 빈한할수록 등물성단백질이 부족되는 것을 말해 주는 것이다. 지역별 혈색소치는 109gm/100ml 이하인 경우가 서울 빈한층가정 아동에 제일 많아서 51.7%나 되며 다음이 산간지역가정, 농촌지역가정의 순으로 많으며 서울부유층가정 아동은 2.2%에

  • PDF

회전교차로 우회전 별도차로 설치 효과 검토 (Effectiveness Analysis on the Installation of Right-Turn Bypass Lane in Roundabout)

  • 임진강;김경환;박병호
    • 한국도로학회논문집
    • /
    • 제12권4호
    • /
    • pp.29-37
    • /
    • 2010
  • 이 논문은 회전교차로 우회전 별도차로를 다루고 있다. 본 연구의 목적은 회전교차로 기하구조의 설계요소 중 우회전 별도차로의 설치에 따른 효과를 분석하는데 있다. 이를 위해 VISSIM을 이용하여 우회전 별도차로의 설치 전 후를 비교 분석하였다. 또한 우회전 별도차로 설치 방식인 양보에 의한 통제 형태와 합류에 의한 통제 형태의 운영효과를 비교 분석하였다. 주요 결과는 다음과 같다. 첫째, 우회전 별도차로 설치 후에는 우회전 교통량비의 증가에 따라 지체가 점차적으로 감소하여 최대 평균 약 28% 감소하는 것으로 나타났다. 둘째, 양보에 의한 통제 형태와 합류에 의한 통제 형태 모두 우회전 교통량이 증가할수록 지체가 감소하였다. 또한 합류에 의한 통제 형태가 양보에 의한 통제 형태보다 최대 평균 약 18% 지체감소 효율이 있는 것으로 나타났다.