• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.6305-6314
• /
• 2015

본 논문에서는 침수조건의 식생이 식재된 개수로의 흐름 및 난류특성을 수치모의하였다. 이를 위해 여과된 Navier-Stokes 방정식을 수치해석 하였고 난류 모형으로 LES 모형을 이용하였다. 식생을 계산격자로 직접 고려하였고 이를 위해 직교격자 기반에 가상경계기법을 적용하였다. 수치모형을 이용하여 계산한 평균흐름을 Liu et al. (2008)의 수리실험데이터와 비교하였고 평균오차 10%내에서 일치하는 것으로 나타났다. 식생영역과 비식생영역 사이에서 강한 와가 생성되는 것을 확인하였고 이는 횡방향에 걸쳐 발생하는 것으로 나타났다. 경계면에서 전단에 의해 유발된 난류는 후류에 의해 발생한 난류성분과 상호작용하여 최대값을 보였다. 전단에 의한 난류는 식생영역 흐름에 영향을 미쳤고 침투깊이는 식생 침수비가 커질수록 증가하였다. 이러한 난류흐름 특성은 식생영역에서 유사거동 메커니즘을 파악하는데 중요한 자료로 활용될 수 있다.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.83-92
• /
• 2019

A pump is considered to be submersible when a motor and a pump are integrated and operate while submerged in water. Submersible pumps mainly function as rejection pumps to prevent foods in densely populated areas, as cold water circulation pumps in large power plants, as pumps to supply irrigation water, as drainage pumps to prevent flooding of agricultural lands, as water supply intake pumps, and as inflow pumps for sewage treatment. The flow in such turbomachines (submersible pumps) inevitably involves various eddy currents. Since it is almost impossible to accurately grasp the complex three-dimensional flow structure and characteristics of a rotating turbomachine through actual testing, three-dimensional numerical analysis using computational fluid dynamics techniques measuring the flow field, velocity, and the pressure can be accurately predicted. In this study, the shape of the impeller was developed to reduce vibration and noise. This was done by increasing the efficiency of the existing submersible pump and reducing turbulence. In order to evaluate the pump's efficiency and turbulence reduction, we tried to analyze the flow using ANSYS Fluent V15.0, a commercial finite element analysis program. The results show that the efficiency of the pump was improved by 4.24% and the Reynolds number was reduced by 15.6%. The performance of a developed pump with reduced turbulence, vibration, and noise was confirmed.

• 한국추진공학회지
• /
• 제4권4호
• /
• pp.78-86
• /
• 2000

Mach 1.8의 동축공기를 갖는 수소 난류 화산 화염의 특성을 이해하는 것이 본 연구의 목적이다. 화염길이와 연료유동의 자취에 대한 직접사진, Acetone PLIF, Mie scattering, 수치해석법을 이용하여 화염의 구조를 분석하였다. 연료의 유속를 고정시켰을 때, 공기의 유속 증가에 따른 변화를 측정하였다. 아음속 화염의 길이는 급격히 감소한 반면, 초음속 화염의 길이는 완만하게 증가하였다. 또한 연료 노즐 립의 두께 변화에 따른 화염의 소염 특성을 관찰하였다. 노즐 립의 두께에 따라 화염 안정성이 증가하였는데 이는 초음속 화염의 안정화를 위한 최소 두께 값이 존재함을 나타낸다. 유동장 구조를 분석한 결과, 연료 제트가 고압영역에 가로 막혀서 축방향 모멘텀을 잃고, 저산란 영역이 만들어지는 것을 확인하였다. 또한, 모멘텀을 잃은 연료가 재순환 영역을 따라 순환하면서 긴 체류시간을 갖기 때문에 예혼합 영역이 만들어 졌음이 밝혀졌다.

• Steel and Composite Structures
• /
• 제30권3호
• /
• pp.281-292
• /
• 2019

In this paper, analysis of critical fluid velocity and heat transfer in the nanocomposite pipes conveying nanofluid is presented. The pipe is reinforced by carbon nanotubes (CNTs) and the fluid is mixed by $AL_2O_3$ nanoparticles. The material properties of the nanocomposite pipe and nanofluid are considered temperature-dependent and the structure is subjected to magnetic field. The forces of fluid viscosity and turbulent pressure are obtained using momentum equations of fluid. Based on energy balance, the convection of inner and outer fluids, conduction of pipe and heat generation are considered. For mathematical modeling of the nanocomposite pipes, the first order shear deformation theory (FSDT) and energy method are used. Utilizing the Lagrange method, the coupled pipe-nanofluid motion equations are derived. Applying a semi-analytical method, the motion equations are solved for obtaining the critical fluid velocity and critical Reynolds and Nusselt numbers. The effects of CNTs volume percent, $AL_2O_3$ nanoparticles volume percent, length to radius ratio of the pipe and shell surface roughness were shown on the critical fluid velocity, critical Reynolds and Nusselt numbers. The results are validated with other published work which shows the accuracy of obtained results of this work. Numerical results indicate that for heat generation of $Q=10MW/m^3$, adding 6% $AL_2O_3$ nanoparticles to the fluid increases 20% the critical fluid velocity and 15% the Nusselt number which can be useful for heat exchangers.

• 항공우주시스템공학회지
• /
• 제13권1호
• /
• pp.1-10
• /
• 2019

교반기에서의 유동 특성은 광범위한 산업 분야에서 매우 유용하다. 일반적으로 교반되는 용기에서의 유동 패턴, 전력 소비 및 혼합 시간은 임펠러의 설계뿐만 아니라 용기 형상 및 내부 구조에 달려 있다. 본 연구에서는 베플 형상과 임펠러의 상호 작용에 의해 생성되는 불안정하고 비정상상태의 복잡한 유동 특성 분석을 ANSYS FLUENT LES 난류 모델을 사용하여 수행하였다. Axial Flow 와 Radial Flow 두 가지 타입의 회전 임펠러와 3가지 베플의 형상 사이의 상호 작용과 영향을 전산유체역학(CFD)으로 예측 비교함으로써 교반 시 임펠러와 베플 주변에서의 유동 특성과 혼합 유동장에서 상대적으로 효율적인 경향을 보이는 설계 모델을 검증할 수 있었다.

• 대한건축학회논문집:구조계
• /
• 제34권4호
• /
• pp.51-58
• /
• 2018

Various types of pilotis frames are used on the ground level of high-rise buildings. In some cases, their interior finishing is destroyed by strong winds or typhoons. In the case of a corner pilotis, the peak wind pressure coefficients were greater on the ceiling than they were on the wall for all wind angles. Specifically, on the ceiling portion of a pilotis, the coefficient increased gradually from the outside to the inside in a symmetrical form that centered on the corner edge. However, the minimum peak wind pressure coefficient was greater at the center of the ceiling than it was on the edge of the pilotis' interior. Additionally, the higher the height of the pilotis, the greater the peak wind pressure coefficient was due to the turbulent flow that occurs within a pilotis. In this study, we evaluated peak wind pressures to design an interior finishing for the end edge of a pilotis and for corner piloti. In terms of specific wind angles, the maximum and minimum peak wind pressure coefficients were each observed. They were a maximum of $320^{\circ}$ and a minimum of $270^{\circ}$ for corner piloti and $0^{\circ}$ and $270^{\circ}$, respectively, for the end edge piloti.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.207-219
• /
• 2022

The suppression of high-intensity blob structures in the scrape-off layer (SOL) by ion-cyclotron range of frequencies (ICRF) power, leading to a decrease in the turbulent fluctuation level, is observed first in the Experimental Advanced Superconducting Tokamak (EAST) experiment. This suppression effect from ICRF power injection is global in the whole SOL at EAST, i.e. blob structures both in the regions that are magnetically connected to the active ICRF launcher and in the regions that are not connected to the active ICRF launcher could be suppressed by ICRF power. However, more ICRF power is required to reach the full blob structure suppression effect in the regions that are magnetically unconnected to the active launcher than in the regions that are magnetically connected to the active launcher. Studies show that a possible reason for the blob suppression could be the enhanced E_r × B shear flow in the SOL, which is supported by the shaper radial gradient in the floating potential profiles sensed by the divertor probe arrays with increasing ICRF power. The local RF wave power unabsorbed by the core plasma is responsible for the modification of potential profiles in the SOL regions.

• 천문학회보
• /
• 제46권2호
• /
• pp.50.1-50.1
• /
• 2021

The Gaia mission opens a new window to study the kinematics and dynamics of young stellar systems in detail. The kinematic properties of young stars provide vital constraints on the formation process of their host systems. Here, we present a kinematic study of the two associations Monoceros OB1 (Mon OB1) and R1 (Mon R1). Member candidates are first selected from the published list of member candidates, a compilation of OB star catalogues, and the classification of young stellar objects with the AllWISE data. According to the conventional wisdom, we selected a total of 728 members with similar proper motions at almost the same distance. Mon OB1 and Mon R1 have high levels of substructures that are also kinematically distinct. We identify six stellar groups in these associations, of which five show a pattern of expansion. In addition, the signature of rotation is found in two stellar groups of Mon OB1. Star formation history is inferred from a color-magnitude diagram. As a result, star formation in Mon OB1 has been sustained for several million years, while Mon R1 formed at almost the same epoch as the recent star formation in Mon OB1. Some old members in the outskirt of Mon OB1 have outward motions, which rules out the previously proposed outside-in star formation scenario. Star-forming regions including Mon OB1 and Mon R1 are found along a large arc-like gas structure. Hence, the formation of these two associations may originate from the hierarchical star formation along filaments in a turbulent molecular cloud.

• 천문학회보
• /
• 제46권2호
• /
• pp.47.3-48
• /
• 2021

We studied the large scale dynamo process in a system forced by helical magnetic field. The dynamo process is basically nonlinear, but can be linearized with 𝛼&𝛽 coefficients and large scale magnetic field $\bar{B}$. This is very useful to the investigation of solar (stellar) dynamo. A coupled semi-analytic equations based on statistical mechanics are used to investigate the exact evolution of 𝛼&𝛽. This equation set needs only magnetic helicity ${\bar{H}}_M({\equiv}{\langle}{\bar{A}}{\cdot}{\bar{B}}{\rangle},\;{\bar{B}}={\nabla}{\times}{\bar{A}})$ and magnetic energy ${\bar{E}}_M({\equiv}{\langle}{\bar{B}}^2{\rangle}/2)$. They are fundamental physics quantities that can be obtained from the dynamo simulation or observation without any artificial modification or assumption. 𝛼 effect is thought to be related to magnetic field amplification. However, in reality the averaged 𝛼 effect decreases very quickly without a significant contribution to ${\bar{B}}$ field amplification. Conversely, 𝛽 effect contributing to the magnetic diffusion maintains a negative value, which plays a key role in the amplification with Laplacian ∇²(= - k²) for the large scale regime. In addition, negative magnetic diffusion accounts for the attenuation of plasma kinetic energy E_V(= 〈 U² 〉/2) (U: plasma velocity) when the system is saturated. The negative magnetic diffusion is from the interaction of advective term - U • ∇ B from magnetic induction equation and the helical velocity field. In more detail, when 'U' is divided into the poloidal component U_pol and toroidal one U_tor in the absence of reflection symmetry, they interact with - B • ∇ U and - U • ∇ B from ∇ × 〈 U × B 〉 leading to 𝛼 effect and (negative) 𝛽 effect, respectively. We discussed this process using the theoretical method and intuitive field structure model supported by the simulation result.

• 대한토목학회논문집
• /
• 제28권2B호
• /
• pp.249-259
• /
• 2008

본 연구에서는 투과성잠제의 비탈면경사가 주변 파동장에 미치는 영향을 검토하기 위해 투과성구조물에 의한 유체저항(관성저항, 층류저항 및 난류저항)을 고려할 수 있는, 즉 파-구조물-지반의 상호작용을 해석할 수 있는 수치모델에 LES 난류모델을 도입한 새로운 수치해석기법(LES-WASS-2D)을 제안하여 기존에 수행되었던 수리모형실험과의 비교를 통하여 검증하였다. 이러한 수치해석기법을 이용하여 투과성잠제의 비탈면경사의 변화에 대한 수치모의를 수행한 결과, 비탈면경사가 완만해질수록 반사율 및 투과율이 감소함과 동시에 에너지손실(Energy loss)이 커지는 것을 알 수 있었다. 또한, 잠제의 비탈면경사의 변화에 따른 마루에서 쇄파점의 위치 및 잠제 배후에서의 순환류와 평균와도의 규모에 대해서도 논의하였다.