• 제목/요약/키워드: Turbulent effect

검색결과 928건 처리시간 0.033초

난류박리기포에 대한 비정상 후류의 영향 (Influence of Unsteady Wake on a Turbulent Separation Bubble)

  • 전세종;성형진
    • 대한기계학회논문집B
    • /
    • 제26권2호
    • /
    • pp.353-361
    • /
    • 2002
  • An experimental study was made of turbulent separated and reattaching flow over a blunt body, where unsteady wake was generated by a spoke wheel-type wake generator with cylindrical rods. The influence of unsteady wake was scrutinized by altering the rotating direction (CW and CCW) and the normalized passing frequency (0 St$\_$H/ 0.20). The Reynolds number based on the cylindrical rod was Re$\_$d/=375. A phase-averaging technique was employed to characterize the unsteady wake. The effect of different rotating directions was examined in detail, which gave a significant reduction of x$\_$R/. The wall pressure fluctuations on the blunt body were analysed in terms of the spectrum and the coherence.

이중연소 램제트 엔진의 난류 연소 현상과 화염 안정성 (Numerical Study of Flame Stability of Turbulent Combustion in a Dual Combustion Ramjet)

  • 최정열;한상훈;김규홍
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.371-374
    • /
    • 2011
  • 이중연소 램제트 엔진의 초음속 난류 연소의 화염 안정성을 살펴보기 위하여 다차원 외삽을 이용한 고해상도 전산 유체해석을 수행하였다. 높은 엔탈피 조건의 수소/일산화탄소 합성 가스와 초음속 공기의 전단층 내 자발 점화를 살펴보았으며, 일정 단면적 연소기와 작은 확산각이 있는 초음속 동축 연소기에 대한 비교를 통하여 초음속 연소는 부상 화염의 특징을 보이며 화염 안정성이 압축성 효과에 크게 영향 받음을 알 수 있었다.

  • PDF

주기적인 원주형 장애물이 있는 덕트유동 및 열전달의 비직교좌표변환에 의한 해석 (Numerical Analysis of Flow and Heat Transfer in Duct with Repeated Cylindrical Blockages by Non-orthogonal Coordinate Transformation)

  • 최영돈;이건휘
    • 대한설비공학회지:설비저널
    • /
    • 제17권4호
    • /
    • pp.473-488
    • /
    • 1988
  • This paper is concerned with the prediction of two dimensional turbulent flows in the parallel plate with the repeated cylindrical blockages. The purpose of this paper is to find the effect of the eccentricity and the pitch of the repeated cylindrical blockages on the flow field, heat transfer coefficients and friction factors. A special technique is developed for the solution of the fully developed turbulent recirculating flow, in which the flow field varies periodically. A non-othogonal coordinate transformation is employed to solve the momentum and the energy equations. The results show that the pitch ratio or the eccentricity of the repeated blockages become smaller, or the Reynolds number of the flow larger, friction factors and heat transfer coefficients increase.

  • PDF

Properties of polarised emission in radio relics

  • Fernandez, Paola Dominguez
    • 천문학회보
    • /
    • 제46권2호
    • /
    • pp.64.2-64.2
    • /
    • 2021
  • Radio relics track cosmological shocks propagating through the intracluster medium. They are among the largest and most polarised sources in the radio sky reaching polarisation fractions up to ~60%. High-resolution observations in total intensity and in polarisation show complex structures on kiloparsec scales. Nevertheless, the relation between the observed features and the underlying morphology of the magnetic field is not clear. In this work we three dimensional MHD-Lagrangian simulations to study the polarised emission produced by a shock wave that propagates through a turbulent medium that resembles the intracluster medium. We find that the synchrotron emission produced in a shocked turbulent medium can reproduce some of the observed features in radio relics. Our work confirms that radio relics can also be formed in an environment with a tangled magnetic field. We also study the effect of intrinsic Faraday Rotation and the depolarisation of the source. Finally, we show how our results depend on the angular resolution of observations.

  • PDF

축대칭 하향단흐름에서 자유흐름 난류강도의 영향 (Effects of the free Stream Turbulence Intensity on the Flow Over an Axisymmetric Backward-Facing Step)

  • 양종필;김경천;부정숙
    • 대한기계학회논문집
    • /
    • 제19권9호
    • /
    • pp.2328-2341
    • /
    • 1995
  • An experimental study on the flow over the axisymmetric backward-facing step was carried out. The purposes of the present study are to investigate the effect of the free stream turbulence intensity on the reattachment length and to understand the turbulence structure of the recirculating flows. Local mean and fluctuating velocity components were measured in the separated and reattaching axisymmetric turbulent boundary layer over the wall of convex cylinder placed in a water tunnel by using 2-color 4-beam fiber optics laser Doppler velocimetry. As the free stream turbulence intensity increased, the reattachment length became shorter due to the enhanced mixing in the separated shear layer. It was also observed that the reverse flow velocity and turbulent kinetic energy increase with increasing free stream turbulence intensity. Spectral data and flow visualization showed that low-frequency motions occur in the separated flow behind a backward-facing step. These motions have a significant effect on the time-averaged turbulence data.

수평평판위 의 혼합대류 열전말 계산 을 위한 4-방정식 모델 의 개발 (Development of four-equation turbulence model for prediction of mixed convective heat transfer on a flat plate)

  • 성형진;정명균
    • 대한기계학회논문집
    • /
    • 제7권2호
    • /
    • pp.193-203
    • /
    • 1983
  • The mixed convective heat transfer problems are characterized by the relatively significant contribution of buoyancy force to the transport processes of momentum and heat. Past analytical studies on this kind of problems have been carried out by employing either the conventional R-.epsilon. turbulence model which includes constant turbulent Prandtl number .sigma.$_{+}$ 1 or an extended R-.epsilon. turbulence model which takes account of the buoyancy effect in appropriate length scale equations. But in the latter case, the temperature variance .the+a.$^{2}$ over bar is approximated by a model under local equilibrium condition and the time scale ratio between velocity and temperature is assumed to be constant. These approximation is known to break down when the buoyancy effect is dominant. The present study is aimed at development of new computational turbulence closure level which can be applied to this rather complex turbulent process. The temperature variance is obtained directly by solving its dynamic transport equation and the time scale ratio which is variable in space is computed by a solution of a dynamic equation for the rate of scalar dissipation .epsilon.$_{\thetod}$ It was found that the computational results are in good agreement with available experimental data of wide range of unstable conditions.

확대유로내의 Bluff-Body 후류확산화염의 구조 및 특성 (1) (Structure and Characteristics of Diffusion Flame behind a Bluff-Body in a Divergent Flow(I))

  • 최병륜;이중성
    • 대한기계학회논문집
    • /
    • 제19권5호
    • /
    • pp.1269-1279
    • /
    • 1995
  • An experimental study is carried out on turbulent diffusion flames stabilized by a circular cylinder in a divergent duct flow. A commercial grade gaseous propane is injected from two slits on the rod as fuel. Flame stability limits, as well as size and temperrature of recirculation zone, are measured by direct and schlieren photographs to clarify the characteristics and structure of diffusion flames and to assess the effect of various divergent angle of duct. The results of the present study are as follows. Temperature in the recirculation zone decreases with increasing divergent angle. The blow-off velocity in parallel duct is higher than that in divergent duct. Critical blow-off velocity is expected to be about 8-12 degree through blow-off velocity pattern. Regardless of divergent angles, the length of recirculation zone is nearly constant, and this length becomes longer with rod diameter. Pressure gradient has an effect on the eddy structure in shear layer behind the rod. With the increase of divergent angle, large scale eddies by dissipated energy in shear layer are split into small scale eddies, and the flame becomes a typical distributedreacting flame.

축류송풍기의 스윕각이 소음에 미치는 영향에 대한 연구 (A Study on the Effect of Sweep Angle of Axial Fan on Its Noise)

  • 최재호;김광용
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.365-370
    • /
    • 2000
  • A computational study on the effect of sweep angle of axial fan on its noise is performed in the present paper. The forward swept axial fan was designed by numerical optimization method incorporated with three dimensional flow analysis. The objective function was defined by the ratio of generation rate of turbulent kinetic energy to pressure head. And, two variables related with sweep angle distribution are used for design variables. The swept fan has better performance characteristics and noise level. The experimental result shows that spectrums of no-sweet and swept fans have differences in the blade passage frequency, especially in the broadband. And the overall noise level of swept fan is lower 10dB(A) than that of no-sweep fan. For the comparison of flow fields between no-sweep fan and swept fan, CFX-TASCflow computational fluid dynamics software is used. Standard k-${\varepsilon}$ model is used for the turbulence model. Distributions of pressure and turbulent kinetic energy distributions are compared in order to find what happen in the low-noise swept fan.

  • PDF

충돌면과 노즐의 형상이 원형충돌제트에 의한 충돌순음 발생에 미치는 영향 (Effect of Nozzle Configuration and Impinging Surface on the Impinging Tone Generation by Circular Jets)

  • 임정빈;권영필
    • 대한기계학회논문집B
    • /
    • 제27권6호
    • /
    • pp.693-700
    • /
    • 2003
  • The effect of the configuration of the nozzle and the impinging surface on the characteristics of the hole-tones has been experimentally investigated. It is found that the plate-tone is a special case of hole-tones, where the hole diameter is zero. The jet velocity range for hole-tones is divided into the low velocity region associated with laminar jet and the high velocity region with turbulent jet. The frequency of the tone is that for the shear layer instability at the nozzle exit or that attainable by a cascade of vortex pairing process with increase of the impinging distance. When the distance is longer than one diameter the frequency decreases to the terminal value near the preferred frequency of the column mode instability, in the range 0.23< $St_d$<0.53, where $St_d$ is the Strouhal number defined by $fd/U_J$, f the frequency, d the nozzle diameter, and $U_J$ the exit velocity. While the convection speed of the downstream vortex, in the present study, is almost constant at low-speed laminar jet, it increases with distance at high-speed turbulent jet. As the frequency increases, the convection speed decreases in the low frequency range corresponding to the preferred mode, in agreement with the existing experimental data for a free jet.

하부요로증상 진단을 위한 요속 및 요류음 분석 시스템 구현 (Implementation of Uroflow and Urophonography Analysis System for LUTS Diagnosis)

  • 전계록;정도운
    • 대한의용생체공학회:의공학회지
    • /
    • 제31권4호
    • /
    • pp.302-309
    • /
    • 2010
  • The present study proposed a method of measuring uroflow and urophonography at the same time for more accurate diagnosis in case uroflow looks normal due to compensatory function hypertrophy in the expression of early obstruction. In case of early obstruction, there happens turbulent uroflow by the obstruction even if the uroflow looks normal and thus obstruction can be detected by measuring and analyzing signal caused by turbulent flow. We implemented a system that can measure both uroflow and urophonography, and evaluated its performance. In the experiment, we observed changes in uroflow and urophonography according to artificial pressure and the degree of obstruction, and confirmed that it is possible to determine the effect of compensatory function hypertrophy by analyzing urophonographyic parameter under the same uroflow. The results of our experiment show that the effect of compensatory function hypertrophy in the early-stage obstruction of lower urinary tract, which is not detectible with uroflowmetry alone, can be assessed through urophonographic analysis.