• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1376-1381
• /
• 2010

In this study, we dealt with an analysis and development of measurement systems for tunnel and slope structures under a high velocity. Deterioration of tunnel and slope structures becomes a critical issue in regard to both safety and economic concerns. Deterioration itself is inevitable, but condition assessment technology and nondestructive evaluation techniques could provide solutions to ensure public safety by means of detecting damage before serious and expensive degradation consequences occur. We reviewed the existing monitoring and maintenance systems of slopes and tunnels and more advanced directions, especially for highways under high-speed vehicles.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.745-750
• /
• 2005

The demand of tunnels has been increased for the linear improvement of general national highway, and road construction and/or enlargement in Korea. Also, the collapses of tunnel portal slope have been increased in recent due to heavy rain caused by global warming. Therefore, it has been risen the requirement of system for the stability of tunnel portal slope in Korea as well as all over the world. The objective of this research is to develop an effective maintenance system for supervising the tunnel portal slope. This paper is a basic proposal to execute a survey on the current status and state of the tunnel portal slopes that were already installed along general national highways.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.191-198
• /
• 2001

Present status of railroad slopes through the field investigation in 26 selected slopes and/or rockfall at risk was grasped. From the evaluation of field data, main characteristics of railroad slopes are that 1) the possibility of failure by rockfall is high, 2) the Possibility of failure by slope itself is low and 3) rockfall's risk at the in and out part of tunnel is especially high. To maintain the railroad slopes systematically and reasonably, it is necessary to make and to use the database of slopes information along the railroad. Furthermore, through the construction of basic slopes' information, maintenance system of railroad slopes was developed in connection with IR-DiPS(Intelligent Railroad - Disaster Prevention System) in the future.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2007년도 특별심포지엄 논문집
• /
• pp.63-79
• /
• 2007

Several remedial works were attempted to stabilize the collapsed area of the inlet slopes of diversion tunnel, but prevention of any further movement was being only carried out at beginning stage by filling the area with aggregates and rock debris, after several cracks had been initiated and developed around the area. The extra specialty developed folding zone is consisted with highly weathered Greywacke and Black shale. The suggested solution is to improve the properties of the rock mass of failed area by choosing the optimum level of reinforcement through the increment of slope rock support design so as to control the movement of slopes during the re-excavation. The Bakun hydroelectric project includes the construction of a hydroelectric power plant with an installed capacity of 2,520MW and a power transmission system connecting to the existing transmission networks in Sarawak and Western Malaysia. The power station will consist of a 210m height Concrete Faced Rockfill Dam. During the construction of the dam and the power facilities the Balui River has to be diverted of the tunnels is 12m and the tunnel width is 16m at the portal area. This paper describes the stability analysis and design methods for the open cut rock slopes in the inlet area of the diversion tunnels. The geotechnical parameters employed in stability calculations were given as a function of four defined Rock Mass Type (RMT) which were based on RMR system from Bieniawski. The stability calculations procedure of the rock slopes are divided into two stages. In the first stage, it is calculated for the stability of each "global" slope without any rock support and shotcrete system. In the second stage, it is calculated for each "local" slope stability with berms and supported with rock bolts and shotcrete. The monitoring instrumentation was performed continuously and some of the design modification was carried out in order to increase the safety of failed area based on the unforeseen geological risks during the open cut excavation.

• 터널과지하공간
• /
• 제7권2호
• /
• pp.150-157
• /
• 1997

Various analytical, empirical and theoretical methods for slope stability assessment were applied on slopes to develop aggregate quarry optimally. Among them are block theory, stereographic analysis, RMR, SMR, limit equilibrium method and maximum likelihood. Test site was estimated that slopes were apt to fail although rock quality was good. Modified direction and dip angle was suggested for stability. To reduce the overbreak and to improve the stability, the vertical blasting was recommended for new subground level.

• Geomechanics and Engineering
• /
• 제13권3호
• /
• pp.517-533
• /
• 2017

In this paper, with a graphical approach, a series of stability charts for homogeneous slopes with benches are presented based on the upper bound limit analysis theory and strength reduction technique. The objective function of the slope safety factor $F_s$ is optimized by the nonlinear sequential quadratic programming, and a substantial number of examples are illustrated to use the stability charts for homogeneous slopes with benches driven by only the action of the soil weight. These charts can be applied to quick and accurate estimations of the stability status of homogeneous slopes with benches. Moreover, the failure modes and the formula for safety factor Fs of homogeneous slopes with benches are provided to illustrate the stability analysis of slopes with benches, which is validated by samples.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.634-643
• /
• 2006

This study was intended to develop a high reliable technique by statistically processing on-site data with a general linear model, providing the basic data for construction, analysis of stability and establishment of maintenance measures for tunnel portal slopes in the future. This study evaluated the stability of a tunnel portal slope using a quantified technique, which is based on a general linear model. The important scores of each independent variable were allocated by using the ranges of the quantified values, based on the predicted coefficient of regression and the scores for categories of each independent variable were allocated so that those are equally spaced. The quantification model obtained from the results of evaluating the total data used for the quantification process provided precise results. In addition, it is expected that a more detail subdivision of response variables and sufficient data would produce a better stability evaluation standard.

• 한국터널지하공간학회 논문집
• /
• 제6권3호
• /
• pp.213-225
• /
• 2004

일반 국도의 선형개량사업 및 도로 확포장 사업의 일환으로 터널의 수가 증가하고 있는 실정이다. 최근들어 집중호우 및 이상기후로 인하여 국지적인 강우가 발생하여 갱구사면의 붕괴도 적지 않게 발생하고 있다. 따라서, 국내의 터널 갱구사면 피해 및 유지관리를 효율적으로 대처할 필요성이 대두되었다. 본 연구는 일반국도변에 기설치 운영되고 있는 터널 갱구사면의 현황 및 상태에 대한 조사를 실시하고 수집된 데이터의 효율적인 관리를 위한 데이터베이스 시스템을 개발, 향후 유지관리를 위한 상태평가 기법을 개발하는 것이다. 연구방법으로는 국도변의 터널 갱구사면의 형태를 분석하기 위하여 현장 조사를 통하여 국내의 터널을 진입형태, 갱문형식, 터널 유형 등 기하학적인 형태에 따른 분석을 실시하였다. 수집된 자료의 효율적인 관리를 위해서 그래픽 사용자 인터페이스를 사용하여 입력, 수정 및 조회가 가능한 데이터베이스 관리 시스템을 개발하였고, 조사된 갱구사면의 위험상태에 대한 등급을 분류하기 위한 상태평가 기준표를 제시하고 이에 따른 등급을 분류하였다. 본 상태평가를 이용하여 국도변의 터널 갱구사면을 분류하여 위험 등급에 따라 향후 지속적으로 유지 관리를 실시할 수 있도록 기초자료로 활용하고자 하는 것이 주 목적이다.

• 한국터널지하공간학회 논문집
• /
• 제14권6호
• /
• pp.561-573
• /
• 2012

최근들어 터널건설이 증가하고 있다. 이러한 터널건설 증가와 더불어 터널시공중 붕락발생 빈도도 증가하고 있다. 이와 비례하여 터널 입 출구부 사면부 변상 발생후 터널내부까지 과다변위를 발생시키는 사례 또한 자주 발생하고 있다. 따라서 본 연구에서는 터널시공 사례를 분석하여 갱구부 사면변상과 터널내부 변위를 발생시키는 요인들을 조사하였고 그중 특히 국부적인 단층파쇄대와 강우가 직접적인 붕락을 발생시키는 요인으로 분석되었다.

• 터널과지하공간
• /
• 제4권3호
• /
• pp.215-227
• /
• 1994

Rock Mass classifications have been developed in many European countries. The most widely used classification methods are the Rock Mass Rating (RMR) system proposed by Bieniawski(1973) and the Q-system developed By Barton et al. (1974). These methods are also adopted at many mountain tunnels and subway sites in our country. Here, a geomechanical classification for slopeds in rock, the "Slope Mass Rating"(SMR) is presented for the preliminary assessment of slope stabiliyt. This method can be applied to excavation and support design in the front part of tunnel and cutting area as a guide line and recommendation on support methods which allow a systemmetic use of geomechanical classification for rock slopes.