• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.80-86
• /
• 2004

With the increasing demand of environmentally clean machining in recent years, the use of coolants has been restricted extensively. In this paper, a multiple comparison method(Tukey's HSD method) is proposed to choose the optimum level of coolant necessary for an efficient and environmentally clean machining. The cutting temperature, specific cutting energy, and surface roughness in turning process are analysed by ANOVA(Analysis Of Variance) and Tukey's HSD method. From the experimental results and statistical analysis, it is found that the optimum condition of coolant level is 10 ml/min with 6% mix ratio, which is almost half of the commonly used level.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.933-942
• /
• 2017

Purpose: The purpose of this paper is to evaluate the performance quality of the open source DBMSs. Performance quality is defined as processing time for Join queries. Query processing time is measured and compared in the most widely used open source DBMSs and commercial DBMS. Methods: By varying the number of tuples of two relations to be joined, the average processing time(seconds) of a Join query in each DBMS was obtained experimentally. ANOVA and Tukey HSD test were used in order to compare the performance quality of DBMSs. Results: There was a significant difference between the performance qualities of the three DBMSs at all experimental levels where the number of tuples was 100, 1,000, 2,000, 10,000, and 50,000. As a result of the Tukey HSD test, two open source DBMSs (MariaDB, MySQL) were classified in the same group only at the tuple level of 100. The commercial DBMS (MS-SQL Server) belonged to another group. At level of more than 1,000 tuples, all three DBMSs belonged to different groups. Conclusion: Within the open source DBMS group, MariaDB showed the better performance quality except for a small number of tuples. Thus the results show that MariaDB can be the alternative to MySQL which is currently most widely used. Between open source DBMS and commercial DBMS groups, MS-SQL Server always shows the best performance quality, but the less number of tuples, the less the difference.

• Communications for Statistical Applications and Methods
• /
• v.16 no.1
• /
• pp.75-83
• /
• 2009

Parallelism tests are proposed for slope in the simple linear regression models. In this paper, we suggest the parametric test using HSD testing method (Tukey,1953) and distribution-free test using Kruskal-wallis (1952) for more than three slopes. Monte Carlo simulation study is adapted to compare the power of the proposed methods with Wilks' Lambda multivariate procedure.

• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2182-2189
• /
• 2004

In the recent years, environmentally conscious design and manufacturing technologies have attracted considerable attention. The coolants, lubricants, solvents, metallic chips and discarded tools from manufacturing operations will harm our environment and the earth's ecosystem. In the present work, the Tukey method of multiple comparisons is used to select the minimum level of coolant required in a turning process. The amount of coolant is varied in 270 designed experiments and the parameters cutting temperature, surface roughness, and specific cutting energy are carefully evaluated. The effects of coolant mix ratio as well as the amount of coolant on the turning process are studied in the present work. The cutting temperature and surface roughness for different quantity of coolant are investigated by analysis of variance (ANOVA) - test and a multiple comparison method. ANOVA-test results signify that the average tool temperature and surface roughness depend on the amount of coolant. Based on Tukey's Honestly Significant Difference (HSD) method, one of the multiple comparison methods, the minimum level of coolant is 1.0 L/min with 2% mix ratio in the aspect of controlling tool temperature. F-test concludes that the amount of coolant used does not have any significant effect on specific cutting energy. Finally, Tukey method ascertains that 0.5 L/min with 6% mix ratio is the minimum level of coolant required in turning process without any serious degradation of the surface finish. Considering all aspects of cutting, the minimum coolant required is 1.0 L/min with 6% mix ratio. It is merely half the coolant currently used i.e. 2.0 L/min with 10% mix ratio. Minimal use of coolant not only economically desirable for reducing manufacturing cost but also it imparts fewer hazards to human health. Also, sparing use of coolant will eventually transform the turning process into a more environment-conscious manufacturing process.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.154-166
• /
• 2016

This study aims to contribute to better understanding the effects of the changes in the parameter values of GroundFilter algorithm(GF), which performs filtering process, and of GridsurfaceCreate algorithm(GC), which creates regular grid, provided in Fusion software on the accuracy of elevation of the final LiDAR-DEM products through comparative analysis. In order to test whether there are significant effects on the accuracy of the final LiDAR-DEM products due to the changes of GF(1, 3, 5, 7, 9) parameter levels and GC(1, 3, 5, 7, 9) parameter levels, two-way ANOVA is conducted based on residuals. The residuals are calculated using the differences between each sample plot's paired field-measured and DEM-derived elevation values given each individual GF and GC level. After that, Tukey HSD test is conducted as a post hoc test for grouping the levels. As a result of two-way ANOVA test, it is found that the change in the GF levels significantly affects the accuracy of LiDAR-DEM elevations(F-value : 27.340, p < 0.01), while the change in the GC levels does not significantly affect the accuracy of LiDAR-DEM elevations(F-value : 0.457). It is also found that the interaction effect between GF and GC levels is not likely to exist(F-value : 0.247). From the results of the Tukey HSD test in the GF levels, GF levels can be divided into two groups('7', '5', '9', '3' vs '1') by the differences of means of residuals. Given the current conditions, LiDAR-DEM can achieve the best accuracy when the level '7' and '3' are given as GF and GC level, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.110-115
• /
• 2001

In this paper, a multiple comparison was proposed to minimize the amount of coolant. And new coolant level, called "low level", was suggested to show usefulness of multiple comparison for experiments. The amount of this levee is about 1/4 of conventional coolant amount-called "high level", and dry cutting is called "none level". Using these coolant levels, the cutting temperatures of each coolant level in turning process were analyzed by analysis of variance(ANOYA)-test and a multiple comparison. As the result of ANOVA-test, we have just known that the average of temperature of each coolant level is not equal. However by Tukey's HSD, one of multiple comparison. it was analyzed that the average of temperature of low level is similar to that of high levee and different from that of none level.erent from that of none level.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.3
• /
• pp.170-175
• /
• 2017

PURPOSE. The aim of the present study was to evaluate the fracture resistances of zirconia, cast nickel-chromium alloy (Ni-Cr), and fiber-composite post systems under all-ceramic crowns in endodontically treated mandibular first premolars. MATERIALS AND METHODS. A total of 36 extracted human mandibular premolars were selected, subjected to standard endodontic treatment, and divided into three groups (n=12) as follows: cast Ni-Cr post-and-core, one-piece custom-milled zirconia post-and-core, and prefabricated fiber-glass post with composite resin core. Each specimen had an all-ceramic crown with zirconia coping and was then loaded to failure using a universal testing machine at a cross-head speed of 0.5 mm/min, at an angle of 45 degrees to the long axis of the roots. Fracture resistance and modes of failure were analyzed. The significance of the results was assessed using analysis of variance (ANOVA) and Tukey honest significance difference (HSD) tests (${\alpha}=.05$). RESULTS. Fiber-glass posts with composite cores showed the highest fracture resistance values ($915.70{\pm}323N$), and the zirconia post system showed the lowest resistance ($435.34{\pm}220N$). The corresponding mean value for the Ni-Cr casting post and cores was reported as $780.59{\pm}270N$. The differences among the groups were statistically significant (P<.05) for the zirconia group, as tested by ANOVA and Tukey HSD tests. CONCLUSION. The fracture resistance of zirconia post-and-core systems was found to be significantly lower than those of fiber-glass and cast Ni-Cr post systems. Moreover, catastrophic and non-restorable fractures were more prevalent in teeth restored by zirconia posts.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.32 no.1
• /
• pp.1-11
• /
• 2016

Tropical tasar silkworm, Antheraea mylitta is a commercial forest silkworm in India that produces tasar silk, but never experimented in Uttarakhand, a Himalayan state of India. A. mylitta express divergent phenotypic characters under different ecological conditions; so, we studied the effect of seven forest tree species in two rearing seasons on variability in silk gland weight of Daba (bivoltine) ecorace of A. mylitta at Forest Research Institute in Dehra Dun, Uttarakhand during 2012 and 2013. We used two-way completely randomized block factorial design and Post HOC Tukey's HSD test to analyse the collected data and there after carried out multiple regression analysis. Results indicated that silk gland weight differed significantly between rearing seasons (DF=1, F=2333.98, p <0.05), host plants (DF 6, F= 1516.25, p <0.05) and their interactions (DF=6, F=7.10, p <0.05). Higher silk gland weight was found in second rearing season than the first on all the host tree species. Terminalia alata fed A. mylitta larvae showed the highest silk gland weight of 8.03 and 9.47 g in first and second rearing seasons, followed by T. tomentosa (7.19 & 9.01g), T. arjuna (6.8 & 8.08 g) and L. speciosa (6.57 & 7.83 g) fed larvae, respectively. Post HOC Tukey's HSD test indicated that silk gland weight of L. speciosa and T. arjuna fed larvae in both the rearing seasons did not differ significantly. E.I. analysis also confirmed that T. alata, T. tomentosa, T. arjuna and L. speciosa are better in their order of merit than T. bellirica , T. chebula and L. tomentosa. Multiple regression analysis indicates that larval weight gain is a strong predictor (β=1.002, t=346.777, p = <0.05) for the silk gland weight of A. mylitta ; however, larval duration had significant negative regression weight (β=-0.270, t=-8.436, p = <0.05) on mean weight of silk gland.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.462-467
• /
• 2014

PURPOSE. This study investigated the influence of surface conditioning procedures and repeated firings on monoclinic content and strength of zirconia before cementation. MATERIALS AND METHODS. Sintered bar-shaped zirconia specimens were subjected to no surface treatment (control), air abrasion, or grinding (n=21). Their roughness was evaluated using a profilometer, and microscope analysis was performed on one specimen of each group. Then, 2 or 10 repeated firings (n=10) were executed, the monoclinic content of specimens was analyzed by X-ray diffraction, and a three-point flexural strength test was performed. Surface roughness values were compared using one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests, the monoclinic content values were tested using Kruskal-Wallis and Mann-Whitney U tests, and the flexural strength values were tested using two-way ANOVA and Tukey HSD tests (P=.05). Spearman's correlation test was performed to define relationships among measured parameters. RESULTS. Surface-treated specimens were rougher than untreated specimens and had a higher monoclinic content (P<.005), and the relationship between roughness and monoclinic content was significant (P<.000). Neither surface treatment nor firing significantly affected the flexural strength, but Weibull analysis showed that for the air-abraded samples the characteristic strength was significantly lower after the $10^{th}$ firing than after the $2^{nd}$ firing. CONCLUSION. After firing, a negligible amount of monoclinic content remained on the zirconia surfaces, and rougher surfaces had higher monoclinic contents than untreated surfaces. Multiple firings could be performed if necessary, but the fracture probability could increase after multiple firings for rougher surfaces.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.1
• /
• pp.16-22
• /
• 2021

Purpose: The purpose of this study is to investigate the effect of surface polishing and fabrication method on the flexural strength of temporary restorative resin. Materials and Methods: Each of four fabrication methods was used to make 30 temporary restorative resin specimens and the specimens were divided into two groups depending on whether they were polished by mechanical polishing. Specimens were stored in 37℃ thermostat for 24 hours. Flexural strength was measured using a universal testing machine (UTM). The data obtained through the experiment were analyzed with Two-way ANOVA, Tukey's HSD test and Paired t-test. Results: CAD/CAM milling group showed the highest flexural strength regardless of surface polishing. In decreasing order, the flexural strength of the other fabrication method group was as follows SLA 3D printing, DLP 3D printing, and Conventional method group. Conclusion: Surface polishing did not affect flexural strength of the temporary restorative resin (P > 0.05). However, there were statistically significant differences in flexural strength depending on fabrication method (P < 0.05).