• 한국연소학회지
• /
• 제23권1호
• /
• pp.36-43
• /
• 2018

Numerical simulations and experiments are performed to investigate the flame development inside tubes with different diameters at the same burst pressure. It is shown that generation of a stable flame play a role in self-ignition. In the smaller tube, multi-dimensional shock interaction is occurred near the diaphragm. After flame of a cross-section is developed, stable flame remains for a moment then it grows having enough energy to overcome the sudden release at the exit. Whereas shock interaction generate complex flow further downstream for a larger tube, it results in stretched flame. This dispersed flame has lower average temperature which makes it easily extinguished.

• 설비공학논문집
• /
• 제4권4호
• /
• pp.289-298
• /
• 1992

Fouling is "a major unsolved" area in heat transfer research. Currently, fouling researches are performed in every directions-fundamental aspects, modeling and cumulating experimental data. In this study, an attempt was made to extend the knowledge in enhanced tube fouling. The Kern-Seaton fouling model which was originally proposed for smooth tube fouling was extended to repeated rib tubes. Key parameters-mass transfer coefficient and wall shear stress-were modeled for repeated rib tubes. Some critical points related with the enhanced tube fouling-uncertainties in the mass transfer rate, wall shear stress modeling, deformation of roughness shape during fouling-were discussed, and some quantitative evaluations were made.

• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.63-68
• /
• 2009

Microminiature heat exchanger has been applied to the gas turbine in order to increase energy efficiency. During the production of microminiature heat exchanger, however, it is very difficult to weld tube to tubesheet. In this study, therefore, welding process of resistance ring projection was used, and weld tensile tests were performed. Sound weld joint was obtained as a result of applying resistance ring projection welding to microminiature heat exchanger to tubesheet. Cold weld occurred at under 1600A. Even though tensile strength was increased with increasing current, splash occurred and tensile strength decreased at 2000A due to the excessive current. Therefore it was determine that the optimal current is 1900A. As result of tensile tests based on ASME code for tube to tubesheet weldment, rupture position was weldment due to Fs(Fractured section) of nugget, which was smaller than tube thickness (t), and it was proven as a partial strength welding because of the average joint efficiency fr = 0.90.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.221-228
• /
• 1989

본 연구에서는 가상균열진전법과 수정 J-적분식을 연계하여 사용할 수 있는 유한요소 프로그램을 개발하고, 이 프로그램을 기존 결과가 있는 2상재료에 적응하여 타당성을 검토한 후, 다상재료의 경우에도 확장하였고, 실제 상변태가 발생하는 중수(heavy water)형 원자로 압력관(pressure tube)의 균열해석에 적용하여 보았다.

• 생물환경조절학회지
• /
• 제25권3호
• /
• pp.184-192
• /
• 2016

본 시험은 만개기 기온($15{\sim}40^{\circ}C$) 및 생장조절제($GA_{4+7}+BA$와 prohexadione-calcium) 살포가 국내 주요 사과 품종('후지', '쓰가루')과 국내에서 육성한 품종들('추광', '감홍', '홍안', '홍금', '홍로', '홍소', '화홍', '섬머드림', '선홍')의 화분 발아율 및 화분관 신장에 미치는 영향을 조사하고자 실시하였다. $15^{\circ}C$부터 $25^{\circ}C$까지 온도가 올라갈수록 화분 발아율과 화분관 신장 길이는 증가되었으나, $30^{\circ}C$ 이상의 고온은 화분 발아율과 화분관 신장 길이를 억제시켰다. $30^{\circ}C$ 이상의 고온에서 화분 발아율과 화분관 신장 길이가 가장 높았던 국내 육성 사과품종은 '선홍'이었다. $GA_{4+7}+BA$ 살포는 무처리구에 비해 화분 발아율 및 화분관 신장 길이를 증진시켰으나, 이러한 효과는 $40^{\circ}C$에서 발생하지 않았다. prohexadione-calcium 살포는 화분 발아율과 화분관 신장 길이에 영향을 주지 않았다. 결론적으로, 사과나무 만개기 기온이 $30{\sim}35^{\circ}C$ 정도로 높아지면, 인공수분 후 $GA_{4+7}+BA$를 살포하는 것이 착과 증진에 좋을 것으로 판단되었다.

• 오토저널
• /
• 제13권3호
• /
• pp.32-42
• /
• 1991

In SI engine research the pressure data in cylinder is the most important fundamental ones leading to engine efficiencies and performances. It is, therefore, necessary to obtain accurate pressure data and yet it is often impossible to install a reliable data producing, flush-mounted type pressure transducer in a cylinder of small and medium size multicylinder SI engines. When flush mounting the transducer is not possible, the spark-plug type pressure transducer is commonly used as an alternative. In this case, the transmission tube of spark-plug type pressure transducer introduces distortions in the pressure signal. Efforts were made to understand the dynamic characteristics of spark-plug pressure transducer by shock tube tests and real engine experiments. In engine experiment the cylinder pressure data were simultaneously obtained by both flush mounted and spark-plug type pressure transducers of certain transmission tube geometry. Those pressure data collected by spark-plug type pressure transducer were tested for correction to flush mounted ones by the application of transfer function. As a result of the calibration the IMEP difference between F/M data and improved S/P data was shown to be corrected about 75-98% from the original ones.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.178-183
• /
• 2004

This paper presents phenomena of vibration and noise due to acoustic resonance in tube bank of a large fossil power plant. The phenomena of acoustic resonance may arise when the vortex shedding frequency coincides with the acoustic natural frequency. In this system dominant frequency of vibration and noise was 37.5Hz. The $3^{rd}$ acoustic natural frequency calculated was 37.2 Hz. When the difference of vortex shedding frequency and acoustic natural frequency is within ${\pm}20%$, acoustic resonance could occur. If system is the state of acoustic resonance, vibration and noise become large. In order to prevent acoustic resonance, anti-noise baffle should be installed in the tube bank. In the case of installing baffle, we should consider the number of baffle and the effect of acoustic mode due to baffle extension length. To do this, we did acoustic mode analysis. After installing anti-noise baffle, acoustic resonance was disappeared and vibration magnitude and noise level was reduced dramatically.

• Clinical and Experimental Pediatrics
• /
• 제49권11호
• /
• pp.1194-1201
• /
• 2006

목 적 : 혼수 환자는 원인에 상관없이 혼수 상태가 오래 지속되었을 경우 회복불능의 상태로 될 수 있기 때문에 원인을 신속하게 발견하여 치료하는 것이 중요하다. 그 중 MRI 검사는 혼수 환자의 원인을 감별하는데 중요하나 자발호흡이 없는 환자에게 MRI 검사 시 여러 가지 제한점으로 인해 그 시행이 어려웠다. 저자들은 변형된 수동식 인공호흡기를 이용하여 일정 거리에서 환자에게 전달되는 환기량을 유지하면서 MRI 검사가 가능한지 알아보고 안정성을 확인하고자 본 연구를 실시하였다. 방 법 : 특별히 고안한 장치는 self-inflating bag type의 수동식 인공호흡기에 PVC 관을 연결하고 그 끝을 환자의 기도와 연결하여 만든 비교적 간단한 장치이다. 또한 안정성을 확인하기 위하여 기계식 인공호흡기를 이용하여 PVC 연결 관의 길이와 직경 및 일회호흡량(tidal volume)을 변화시켰을 경우 TVe, MVe, PIP를 측정하여 환기에 미치는 영향에 대해 알아보았다. 결 과 : 15 mm, 25 mm 직경의 2가지 종류의 PVC 연결 관을 이용하여 TVi를 변화시킴과 동시에 관의 길이를 1, 2, 3 m로 증가시킴에 따라 TVe, MVe, PIP 값을 측정하였으며, 그 결과 TVe, MVe 값은 대조군과 비교해 차이가 없었고 PIP 값은 TVi가 증가함에 따라, 관의 길이가 늘어남에 따라 의미 있는 증가를 보였다(P<0.05). 또한 관의 길이, TVi에 관계없이 PIP 값은 PVC 연결 관의 직경과 음의 상관관계를 보였다. 즉 관의 직경이 작을수록, 관의 길이가 길어질수록, 일회호흡량이 증가할수록, 환기량을 유지하기 위한 PIP값은 증가하였다. 5명의 환자들을 대상으로 이러한 방법을 이용하여 MRI 검사를 시행하였으며 성공적으로 검사를 실시하였다. 결 론 : 저자들이 고안한 수동식 인공호흡기를 이용한다면 자발호흡이 불안정하여 MRI 검사를 시행하지 못했던 많은 환자들에게 더 많은 검사의 기회가 주어질 것이며 환자의 질환을 진단하는데 많은 도움을 줄 것이다.

• Korea-Australia Rheology Journal
• /
• 제21권4호
• /
• pp.203-211
• /
• 2009

In flows with deformation rates larger than the inverse Rouse time of the polymer chain, chains are stretched and their confining tubes become increasingly anisotropic. The pressures exerted by a polymer chain on the walls of an anisotropic confinement are anisotropic and limit chain stretch. In the Molecular Stress Function (MSF) model, chain stretch is balanced by an interchain pressure term, which is inverse proportional to the $3^{rd}$ power of the tube diameter and is characterized by a tube diameter relaxation time. We show that the tube diameter relaxation time is equal to 3 times the Rouse time in the limit of small chain stretch. At larger deformations, we argue that chain stretch is balanced by two restoring tensions with weights of 1/3 in the longitudinal direction of the tube (due to a linear spring force) and 2/3 in the lateral direction (due to the nonlinear interchain pressure), both of which are characterized by the Rouse time. This approach is shown to be in quantitative agreement with transient and steady-state elongational viscosity data of two monodisperse polystyrene melts without using any nonlinear parameter, i.e. solely based on the linear-viscoelastic characterization of the melts. The same approach is extended to model experimental data of four styrene-butadiene random copolymer melts in shear flow. Thus for monodisperse linear polymer melts, for the first time a constitutive equation is presented which allows quantitative modeling of nonlinear extension and shear rheology on the basis of linear-viscoelastic data alone.

• 대한치과마취과학회지
• /
• 제13권4호
• /
• pp.189-193
• /
• 2013

We experienced dfficult airway management in a patient who had Ludwig angina with morbid obesity, dfficulty with mouth opening and neck extension. We planned to perform awake-nasotracheal intubation with fiberoptic bronchoscopy but the patient's condition was not suitable to do this procedure. Thus, we tried fiberoptic nasotracheal intubation under general anesthesia but we experienced difficult airway management due to epistaxis. We tried to use video laryngoscope instead of fiberpotic bronchoscopy but also failed to guide the tube into trachea due to limited mouth opening. We used video laryngoscope to make a view of vocal cord and used fiberoptic bronchoscope as an intubation guide of endotrachedal tube and successfully intubated the patient.