• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.49-55
• /
• 2018

Under the era of energy crisis, hydrogen energy is considered as one of the most potential alternative energies. Liquid hydrogen has much higher energy density per unit volume than gas hydrogen and is counted as the excellent energy storage method. In this study, Navier-Stokes equations based on 2-phase model were solved by using a computational fluid dynamics program and the liquefaction process of gaseous hydrogen passing through a cryogenic cooling tube was analyzed. The copper with high thermal conductivity was assumed as the material for cryogenic cooling tube. For different inlet velocities of 5 m/s, 10 m/s and 20 m/s for hydrogen gas, the distributions of fluid temperature, axial and radial velocities, and volume fractions of gas and liquid hydrogens were compared. These research results are expected to be used as basic data for the future design and fabrication of cryogenic cooling tube to transform the hydrogen gas into liquid hydrogen.

• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.440-452
• /
• 1994

Nuclear fuel bundles are designed such that the heat flux at a-fuel pin surface should not exceed the critical heat flux (CHF) during normal operation and anticipated transient. Therefore, evaluation of the CHF for fuel bundle is demanded in an exact and reliable manner. One of the major concerns with the current application of CHF correlations is that the CHF based on circular tubes is applied to the fuel bundle subchannel analysis, mainly in terms of the hydraulic diameter with correction factors which may result in a source of possibly large uncertainties in CHF prediction. The hydraulic diameter does not recognize the local properties of fluid nor such effect as the surface curvature; the turbulence action on the convex surface is much more pronounced than that on the concave surface. Even for the tube having concave curvature, the effect of tube diameter on CHF becomes important with decreasing diameter. These facts imply that the convex curvature effect is significant and crucial to the reliable CHF prediction. This paper reviews and discusses analytical and experimental aspects of effect of transverse convex curvature in incompressible turbulent flow and heat transfer, and on CHF. Flow models to quantify this effect are briefly mentioned and future works are recommended.

• Solar Energy
• /
• v.15 no.2
• /
• pp.77-90
• /
• 1995

An effective heat transfer during freezing process was proposed in the vertical cylinder to improve the effectiveness of the heat storage. Vertical cylinder was filled with pure water in order to investigate ice-shape, temperature distribution of the liquid, temperature distribution of the cylinder tube wall, total heat storage per unit mass in the test section under the two experimental conditions; inlet temperature of working fluid is constant($-10^{\circ}C$) and inlet direction of working fluid is either upward flow or downward. Both the mean temperature of the liquid and temperature difference of cylinder tube wall in the upward were lower than those in the downward. In case that the initial temperature of water was $7^{\circ}C$ and $4^{\circ}C$, the shape of ice layer in the upward was more uniform than that in the downward. In case of $1^{\circ}C$, the shape of ice layer is formed by inlet direction of working fluid. Finally, time-varying total heat energy stored in the water in the upward was higher than that in the downward.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.34-36
• /
• 1990

The flow direction in a glass tube is measured by using a forward scatering dual beam laser Doppler velocimeter with an acousto-optic modulator. We can determine the flow direction by measuring the shifted Doppler frequency which is dependent on the order of modulation of the laser frequency shifting moves only the Doppler signal, enabling complete separation of the Pedestal and Doppler singal.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.115-120
• /
• 2001

본 논문에서는 비닐 튜브의 결함검사에 이용하기 위한 이진화 임계치의 자동 결정방법과 패턴매칭에 이용되는 패턴 모델의 자동 친정방법에 대하여 기술한다. 256 Gray 영상을 받아 들여 이진화 임계치를 결성하기 위해서, 휘도치 분포 곡선에서 2개의 극대값을 찾고, 두 극대 위치의 중간위치를 이진화 임계치로 결정하는 방법을 이용하였다. 그리고 패턴 모델을 생성하기 위하여는 수직, 수평 방향의 누적함(Profile)을 이용하였다. 이 방법은 인쇄물 검사 시스템뿐 아니라 비슷한 휘도치 분포를 같는 반도체 자동 검사 시스템을 비롯한 일반적인 건사 시스템에 적용이 가능하다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.227-228
• /
• 2000

가상 임팩터(virtual impactor)는 가속노즐(acceleration nozzle)아래에 충돌판(impaction plate) 대신 가상의 공간을 가진 수집관(receiving tube)이 설치되어 유선의 방향이 $90^{\circ}$로 바뀔 때, 큰 입자는 유선에서 벗어나 수집노즐에 포집된다(Hounam and Sherwood, 1965). 가상 임팩터에는 관성 임팩터(inertial impactor)와는 다르게, 절단입경(cut-size)보다 큰 입자를 분리할 수 있는 부 유동(minor flow)과 절단입경보다 작은 입자를 분리할 수 있는 주 유동(major flow)으로 나눈다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.216-216
• /
• 2004

본 논문은 우리가 일상 생활에서 접하는 에어컨의 핵심 부품인 열 교환기의 제작과정 중에서 확관 공정에서의 확관속도 최적화에 관한 것이다 여기서 열 교환기는 구멍 뚫린 박판형태의 방열핀과 이 구멍을 통과하는 구리재질의 관인 헤어핀의 2가지 주요 부품으로 구성되어있다 그리고 확관기(Fig. 1)에 있어서의 확관공정은 Fig. 2에서 보는 바와 같이 소성변형을 통한 관의 반지름 방향의 팽창으로 방열핀과 헤어핀을 결합시켜주는 높은 정밀도를 요구하는 작업이다.(중략)

• KSBB Journal
• /
• v.16 no.2
• /
• pp.107-114
• /
• 2001

The dynamic evolution process has resulted in the myriad shapes, functions, and systems evident in every living organism. For centuries, people have been harnessing the power of evolution to produce new varieties of plants and animals, such as producing tomatoes from berries and Chihuahuas from wolves. Now scientists are using it to produce better molecules, ranging from drugs to industrial chemicals, and doing it in days or weeks rather than eons. The ingenious process, which creates genetic diversity and selects those with desired features in the laboratory, is called directed evolution or test tube evolution. In this paper, concepts of directed molecular evolution and some examples will be discussed.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2108-2112
• /
• 2007

The air and water flow distribution are experimentally studied for a round header-ten microchannel tube configuration. Three different inlet orientations (parallel, side, normal) were investigated. Tests were conducted with downward flow configuration for the mass flux from 70 to 130 kg/$m^2s$, quality from 0.2 to 0.6, non-dimensional protrusion depth (h/D) from 0.0 to 0.5. It is shown that, for almost all the test conditions, normal inlet yielded the best flow distribution, followed by side and parallel inlet. Possible reasoning is provided using flow visualization results.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.10 no.1
• /
• pp.56-63
• /
• 2014

In this research, burst tests for axial notched steam generator tubes were conducted. To measure the burst pressure of notched tubes, a burst testing system was manufactured. The tests were conducted under internal pressure at room temperature. Part-through-wall and through-wall notches which have various geometries with different depths and lengths were machined by electro-discharged-machined(EDM) method. The burst pressure decreased exponentially with increasing notch length and decreased almost linearly with increasing notch depth. A comparison of the burst pressure with existing burst pressure solutions for cracked tube show that the existing solution agree well with the test results.