• 보존과학회지
• /
• 제38권4호
• /
• pp.265-276
• /
• 2022

A long-term monitoring investigation at Sarushima Battery (Kanagawa, Japan), which is one of the modernization heritages was conducted from 2017.06 to 2020.12. The investigation of the temperature and relative humidity (RH), measurement of the amount of brick decay, and X-ray diffraction analysis of the brick decay was conducted to understand in detail the environment in which the historical brick structure, the state of deterioration, identify the factors of deterioration. Furthermore, it was discussed whether the suitability of these investigation methods for assessing the status, identifying the level of deterioration and the factors that led to deterioration at the historical brick heritages. It was found that the brick deterioration at the site progressed especially in two periods: in April, and from June to August. These periods coincided with the period when the RH inside the structure decreased, and the Toyo-gumi bricks were in the process of absorbing moisture. Several different types of salts were detected in brick decay, especially thenardite, which is considered highly hazardous and destructive during periods when the amount of brick decay increased. Therefore, the RH in the structure and the salts present in the bricks were identified as one of the factors in the deterioration of the bricks at the site. The methods used in this study are appropriate as the initial survey methods for investigating the current conditions and identifying the causes of deterioration because it is possible to understand the environment within the modernization heritages, grasp the details of deterioration progression, and identify the characteristics of deterioration progression and its factors through long-term investigation using the simple methods.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.23-32
• /
• 2008

국내산 목재의 신용도개발을 위한 기초연구로서, 국내에서 생장한 밤나무 7품종(단택, 이취, 이평, 만성, 은기, 유마, 축파)의 목재의 해부 및 물리적 특성을 조사하였다. 밤나무재의 관공은 환공성 문양공재 형태였고 주로 고립관공이 관찰되었다. 방사유세포는 평복, 직립, 방형이 모두 존재하였으나 주로 평복세포였다. 방사조직은 단열, 복열, 다열의 형태가 모두 관찰되었으나 수심부에서는 거의 단열방사조직이었고 수피부에서는 복열이나 다열방사조직의 출현빈도가 높았다. 수심부는 수피부보다 도관직경이 작았고, 단위면적 당 도관의 분포수가 많았으며 방사조직의 수가 적고 방사조직의 세포고가 높았다. 복열 및 다열방사조직의 출현비율은 단택, 이취, 만성, 축파에서 높은 반면, 유마, 은기, 이평에서 낮았다. 연륜폭은 수심부가 수피부에 비해 비교적 더 넓었고, 수심부 연륜폭은 만성과 유마가, 수피부 연륜폭은 이취가 넓었다. 만재율은 수심부와 수피부 간에 큰 차이가 없었으나 대체적으로 수피부가 다소 높았고, 품종 중에서는 만성과 축파가 높았다. 생재함수율은 모든 품종에서 심재부가 변재부보다 다소 높게 나타났다. 밀도는 심재부와 변재부, 품종에 따른 큰 차이는 없었으나 대체적으로 심재가 변재보다 높게 나타났으며 특히 이평과 이취의 밀도가 컸다.

• 한국산림과학회지
• /
• 제105권1호
• /
• pp.93-102
• /
• 2016

본 연구는 우리나라 밤 주요재배 품종을 대상으로 저장온도($4^{\circ}C$, $-1^{\circ}C$) 및 품종에 따른 밤 과실의 저장 중 품질변화를 분석하였다. 저장기간(16주) 동안 밤 과실의 외피색, 경도, 당도, 부패율, 관능평가 등을 조사하여 품질변화 양상을 비교하였다. 저장기간 동안 외피색의 변화는 '축파(Tsukuba)'와 '석추(Ishizuchi)'가 적었던 반면 '이평(Riheiguri)'과 '대보(Daebo)'에서는 유의적으로 크게 나타났다. 저장 온도에 따른 밤 품종들의 외피색의 변화는 $4^{\circ}C$ 처리구보다 $-1^{\circ}C$ 처리구에서 적게 나타났다. 저장온도 $-1^{\circ}C$에서 품종에 따른 경도를 비교시 '유마(Arima)'와 '단택(Tanzawa)' 품종은 감소하는 경향을 보였고 가장 낮게 나타났다. 저장온도에 따른 밤 품종들의 경도를 비교하면 $4^{\circ}C$에 보관한 밤들의 경도가 $-1^{\circ}C$에 보관한 밤에서 보다 높게 나타났다. 저장기간 동안 당도가 가장 많이 증가한 품종은 '이평(Riheiguri)'이었고, '유마(Arima)'는 가장 적게 증가하였다. 저장기간 동안 당도는 저장온도 $4^{\circ}C$와 $-1^{\circ}C$ 모두 처리구에서 증가하였고, 저장온도 $-1^{\circ}C$처리구에서 더 많이 증가하였다. 부패율은 저장온도 $4^{\circ}C$ 처리구보다 $-1^{\circ}C$ 처리구에서 더 낮았으며, '석추(Ishizuchi)'와 '이평(Riheiguri)'의 부패율이 높았으나, '대보(Daebo)', '옥광(Okkwang)', '단택(Tanzawa)'은 낮게 나타났다. 관능평가의 경우, 식감과 단맛을 조사한 결과, '이평(Riheiguri)', '대보(Daebo)', '축파(Tsukuba)'는 단단한 식감과 강한 단맛을 나타낸 반면, '단택(Tanzawa)'은 다른 품종에 비해 상대적으로 식감이 물렀다. 저장기간 동안 '유마(Arima)'와 '옥광(Okkwang)'은 약한 단맛을 나타냈다. 식감은 저장온도 $4^{\circ}C$의 과실이 더 단단했으며, 단맛은 저장온도 $-1^{\circ}C$의 과실에서 더 높았다. 저장온도 $4^{\circ}C$에 저장한 밤의 식감이 우수하고 단단하여 $4^{\circ}C$는 1개월 이내 단기저장에 좋은 온도인 것으로 보이며, 4개월 이상 장기저장 시에는 $-1^{\circ}C$가 적합할 것으로 판단된다. 본 연구 결과는 우리나라 밤 주요재배 품종의 수확 후 관리에 대한 기초자료를 제시하고 고부가가치 향상 및 임업 소득 증대에 기여될 것으로 전망된다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.173-182
• /
• 2005

In this paper, a target tracking algorithm for tracking maneuvering vehicles is presented. The overall algorithm belongs to the category of an interacting multiple-model (IMM) algorithm used to detect multiple targets using fused information from multiple sensors. First, two kinematic models are derived: a constant velocity model for linear motions, and a constant-speed turn model for curvilinear motions. Fpr the constant-speed turn model, a nonlinear information filter is used in place of the extended Kalman filter. Being equivalent to the Kalman filter (KF) algebraically, the information filter is extended to N-sensor distributed dynamic systems. The model-matched filter used in multi-sensor environments takes the form of a federated nonlinear information filter. In multi-sensor environments, the information-based filter is easier to decentralize, initialize, and fuse than a KF-based filter. In this paper, the structural features and information sharing principle of the federated information filter are discussed. The performance of the suggested algorithm using a Monte Carlo simulation under the two patterns is evaluated.

• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.105-111
• /
• 2005

This paper presents the basic characteristics of a cutoff cavity-backed aperture antenna with a feed post and a parasitic post inserted parallel to the aperture. It is shown that this type of antenna forcibly resonates the cutoff cavity by adding a single external reactance to the parasitic post. The Galerkin's method of moments is used to analyze integral equations for the unknown electric current on each post and the aperture electric field on the aperture. The value of an external reactance for forced resonance is analytically obtained by deriving a determining equation. Also the current distribution on each post, aperture electric field distributions, and the radiation patterns are discussed. The theoretical analysis is verified by the measured return loss and radiation patterns.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.17-17
• /
• 1996

An experimental research is a useful approach for realizing autonomous mobile robots to work in real environment. We are developing an autonomous mobile robot platform named "Yamabico" as a tool for experimental real world robotics research. The architecture of Yamabico is based on the concept of centralized decision making and functionally modularization. Yamabico robot has two level structure with behavior and function levels, and its hardware and software are functionally distributed for providing incremental development and good maintenancibility. We are using many Yamabico robots in our laboratory to realize the robust navigation technology for autonomous robots. The methodology for experimental and task-oriented approach of mobile robotics will be presented. And some experimental results of real world navigation in indoor and outdoor environment will be shown. be shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.579-581
• /
• 2004

We wish to develop micro-total analysis system (TAS) on a chip, and to make a trial approach to solve the important problem that is to detect ions separated by the electric field. We propose an idea, which is as for rotational motions of dipolar ions, which are affected by the ion atmosphere in outer regions. This is a new kind of the ion-sensitive field effect transistor (ISFET). We wish to develop the ISFET chips, and give more effective, fast and sensitive, capillary electrophoresis is designed in near future.

• Journal of Contemporary Eastern Asia
• /
• 제12권2호
• /
• pp.19-34
• /
• 2013

Previous research assessed media reporting on nuclear accidents and risks, whilst studies about the Fukushima accident focused on the impact of the Internet on coverage of the incident. However, little research has addressed news framing or comparisons of the perceptions of journalists in relation to reporting nuclear accidents. The aim of this study is to apply framing analysis to news content in The New York Times, the Los Angeles Times, and USA Today about the Fukushima accident. It explores the question of how journalists view reporting on complex events. Content analysis of these three newspapers shows that conflict, responsibility, and economic consequences were the most frequently used frames. According to the journalists interviewed, the biggest problem was the inability to assess information due to contrary positions held by experts. It is argued that the Fukushima accident was framed as a conflict of experts and officials' opinions, utility and government officials' responsibility, and economic consequences for the United States. Adherence to professional norms of objectivity and impartiality was signified as the best approaches to risk reporting.

• 천문학회지
• /
• 제38권2호
• /
• pp.311-314
• /
• 2005

We report the current status of Japanese lunar exploration SELENE (SELenological and ENgineering Explorer). As of the end of 2004, scientific instruments onboard the Main Orbiter are under final checkout before they are provided to the proto-flight-model (PFM) integration test. Also, we present the future perspectives of the lunar based instruments and facilities. 'In-situ Lunar Orientation Mea-surement (ILOM)' experiment measures the lunar rotation with high accuracy by tracking stars on the Moon with a small photo-zenith-tube type optical telescope. A basic idea of a radio telescope array of very low frequency range on the lunar far-side is also mentioned.