• 제목/요약/키워드: TrueBeam

검색결과 109건 처리시간 0.025초

집속 전자 빔 장치에서 스캔 주파수에 따른 실시간 디지털 필터 설계에 관한 연구 (Study on Real-Time Digital Filter Design as Function of Scanning Frequency of Focused Electron Beam)

  • 김승재;오세규;양경선;정광오;김동환
    • 대한기계학회논문집A
    • /
    • 제35권5호
    • /
    • pp.479-485
    • /
    • 2011
  • 열 전자 방출 형 전자 빔 장치에서 영상을 획득하기 위해서는 텅스텐 필라멘트에서 발생한 전자빔을 스캔 할 장치가 필요하다. 이때, 스캔 되는 주파수에 따라서 시료 표면에서 튀어 나오는 2 차 전자신호에 대하여 잡음 성분의 발생이 다르게 나타난다. 본 연구에서는 잡음 성분 제거를 위한 필터 설계를 위해서 2 차 전자신호에 대한 실시간 주파수 분석을 통해 신호와 잡음 성분을 구분했다. 그리고 부동 소수점 연산이 가능한 DSP 에서 디지털 필터 설계를 통하여 신호대비 잡음 성분 제거를 통하여 고배율로 획득한 전자현미경의 영상의 질을 향상 시켰다.

용적변조회전 방사선치료에서 Portal Dosimetry를 이용한 선량평가의 재현성 분석 (Evaluate the implementation of Volumetric Modulated Arc Therapy QA in the radiation therapy treatment according to Various factors by using the Portal Dosimetry)

  • 김세현;배선명;서동린;강태영;백금문
    • 대한방사선치료학회지
    • /
    • 제27권2호
    • /
    • pp.167-174
    • /
    • 2015
  • 목 적 : 복잡하고 정교하게 계획된 용적변조회전 방사선치료(Volumetric Arc Therapy, VMAT)의 Portal Dosimetry를 이용한 치료 전 선량평가가 다양한 인자에 따라 재현성을 유지하는지 분석하고자 하였다. 대상 및 방법 : 실험에는 TrueBeam STx$^{TM}$(Ver.1.5, Varian, USA), Portal dosimetry application(Ver.10, Varian)과 Portal Vision aS1000 Imager(Varian, USA)을 사용하였다. 두경부암 환자 2명, 전립샘암 환자 3명, 폐암 환자 1명, 자궁경부암 환자 1명, 총 7명의 환자에 대하여 Portal Dosimetry용 VMAT 전산화치료계획(Eclipse, Ver.10.0, Varian, USA)을 수립하였다. 오전 치료 전과 후 오후 치료 종료 후 각 4시간 간격을 두고 3회씩 5일에 걸쳐 선량평가를 시행하였다. Gamma pass rate(GPR 3%, 3mm 95%신뢰구간)와 Beam 출력의 상관관계를 확인하기 위하여 선량평가 시행 전 Beam 출력 을 물등가모형과 이온전리함(IBA dosimetry, Germany)을 이용하여 측정하였다. Electronic Portal Imaging Device(EPID) 상태에 따른 GPR 의 변화를 확인하기 위하여 EPID의 영상 교정 (Dark field correction, Flood field correction) 전과 후로 나누어 선량평가를 시행하였다. 또한 다엽콜리메이터(Multi Leaf Collimator) 상태에 따른 GPR의 변화를 확인하기 위해 다엽콜리메이터 Initialize 전과 후로 나누어 선량평가를 시행하였다. 결 과 : Portal Dosimetry를 시행하여 얻은 모든 환자들의 각 시간대 별 GPR의 평균값은 97.11%, 96.09%, 95.37% 였고 최대 차이를 보인 환자의 경우 각 시간대 별 GPR의 평균값은 95.73%, 94.20% 93.23% 였다. 선량평가 시점의 Beam 출력을 측정한 결과 각 시간대별 평균값은 100.45%, 100.46%, 100.59% 였다. EPID의 영상 교정(Dark field correction, Flood field correction)을 시행하기 전과 후의 대상 환자들의 GPR의 평균값은 95.94 %, 96.01% 였다. 또한 다엽콜리메이터 의 Initialize 를 시행하기 전과 후의 대상 환자들의 GPR 의 평균값은 95.83%, 96.40%였다. 결 론 : 치료기 사용시간이 경과됨에 따라 대상 환자들의 GPR 평균값이 0.8% 감소함을 확인할 수 있었다. Beam 출력은 각 측정시점에 0.1% 오차범위 안에서 일정한 상태를 유지하였다. EPID의 영상 교정 전, 후 의 선량평가 결과 GPR은 평균 0.1% 차이를 나타내었다. 다엽콜리메이터의 Initialize 전, 후의 선량평과 결과 Initialize 시행 후 GPR이 평균 0.6% 상승하였고 다엽콜리메이터 상태에 따라 GPR이 변화할 수 있다는 것을 확인할 수 있었다. 복잡하고 정교하게 계획된 VMAT의 치료 전 선량평가 도구로서 재현성을 유지하며 Portal Dosimetry를 이용하기 위해서는 주기적인 장비의 점검뿐만 아니라, 선량평가에 영향을 미칠 수 있는 다양한 인자들에 대한 관리가 이뤄져야 할 것으로 판단된다.

  • PDF

외팔 보를 이용한 Location Template Matching 방법을 적용함에 있어서 격자간격의 영향 분석 (Analysis of the Effect of the Grid Spacing on the Application of the Location Template Matching Method Using a Cantilever Beam)

  • 신기홍
    • 한국소음진동공학회논문집
    • /
    • 제26권5호
    • /
    • pp.609-615
    • /
    • 2016
  • Measuring similarity between two signals is a key element of the location template matching (LTM) method which is one of impact source localization technique. As a measure of similarity, the correlation coefficient is most widely used, and the group delay based method is recently proposed to improve the accuracy of finding the impact source. In practice, the LTM method assumes that the similarity between two signals decreases as the distance between two corresponding impact points increases, where the distance between two neighboring impact points defines the grid spacing. In this paper, it is shown that this assumption is not always true but the correlation coefficients fluctuate forming a main robe and many side robes as the distance between two neighboring impact points increases. On the other hand, the standard deviation of group delay sharply increases with a small increase of the grid spacing. These are demonstrated by using a simple cantilever beam. Based on these findings, an optimal way of implementing the LTM method may be suggested by combining the correlation coefficient and the group delay based approaches.

Recent Advances in Advanced Oxidation Processes

  • Huang, Chin-Pao
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 1998년도 가을 학술발표회 프로그램
    • /
    • pp.1-1
    • /
    • 1998
  • Advanced (Chemical) oxidation processes (AOP) differ from most conventional ones in that hydroxyl radical(OH.) is considered to be the primary oxidant. Hydroxyl radicalcan react non-selectively with a great number of organic and inorganic chemicals. The typical rate constants of true hydroxyl radical reactions are in the range of between 109 to 1012 sec-1. Many processes are possible to generate hydroxyl radical. These include physical and chemical methods and their combinations. Physical means involves the use of high energy radiation such as gamma ray, electron beam, and acoustic wave. Under an applied high energy radiation, water molecules can be decomposed to yield hydroxyl radicals or aqueous electrons. Chemical means include the use of conventional oxidants such as hydrogen peroxide and ozone, two of the most efficient oxidants in the presence of promoter or catalyst. Hydrogen peroxide in the presence of a catalyst such as divalent iron ions can readily produce hydroxyl radicals. Ozone in the presence of specific chemical species such as OH- or hydrogen peroxide, can also generate hydroxyl radicals. Finally the combination of chemical and physical means can also yield hydroxyl radicals. Hydrogen peroxide in the presence of acoustic wave or ultra violet beam can generate hydroxyl radicals. The principles for hydroxyl radical generation will be discussed. Recent case studied of AOP for water treatment and other environmental of applications will be presented. These include the treatment of contaminated soils using electro-Fenton, lechate treatment with conventional Ponton, treatment of coal for sulfur removal using sonochemical and the treatment of groundwater with enhanced sonochemical processes.

  • PDF

평면 뼈대구조물의 큰 변형에 대한 비선형 유한요소의 정식화 (A Finite Element Nonlinear Formulation for Large Deformations of Plane Frames)

  • 윤영묵;박문호
    • 전산구조공학
    • /
    • 제7권4호
    • /
    • pp.69-83
    • /
    • 1994
  • 평면 뼈대구조물의 매우 큰 변형에 대하여 정확한 비선형 유한요소의 정식화 과정을 나타내었다. 유한요소의 구성은 변화되는 재료의 기준 물성치에 근거를 두고 형성하였으며 매우 큰 변형을 받는 재료의 성질을 명확하게 특정지어 진응력-변형율 관계식을 직접 적용할 수 있도록 하였다. 큰회전과 작은 변형율을 받는 문제들을 형성하기 위하여 Co-rotation 접근 방법을 사용하였다. 큰 변형을 일으키는 요소의 문제를 해결하기 위하여 직선보 형태의 유한요소를 사용하였으며 개개의 유한요소의 정식화는 축방향력의 영향을 고려하여 미소 처짐보이론을 바탕으로 형성하였다. 본 연구에서 형성된 큰 변형에 대한 비선형 유한요소의 타당성을 확인하기 위해 몇몇 수치해들을 해석하고 검토하였다.

  • PDF

Determination of Absorbed Dose for Gafchromic EBT3 Film Using Texture Analysis of Scanning Electron Microscopy Images: A Feasibility Study

  • So-Yeon Park
    • 한국의학물리학회지:의학물리
    • /
    • 제33권4호
    • /
    • pp.158-163
    • /
    • 2022
  • Purpose: We subjected scanning electron microscopic (SEM) images of the active layer of EBT3 film to texture analysis to determine the dose-response curve. Methods: Uncoated Gafchromic EBT3 films were prepared for direct surface SEM scanning. Absorbed doses of 0-20 Gy were delivered to the film's surface using a 6 MV TrueBeam STx photon beam. The film's surface was scanned using a SEM under 100× and 3,000× magnification. Four textural features (Homogeneity, Correlation, Contrast, and Energy) were calculated based on the gray level co-occurrence matrix (GLCM) using the SEM images corresponding to each dose. We used R-square to evaluate the linear relationship between delivered doses and textural features of the film's surface. Results: Correlation resulted in higher linearity and dose-response curve sensitivity than Homogeneity, Contrast, or Energy. The R-square value was 0.964 for correlation using 3,000× magnified SEM images with 9-pixel offsets. Dose verification was used to determine the difference between the prescribed and measured doses for 0, 5, 10, 15, and 20 Gy as 0.09, 1.96, -2.29, 0.17, and 0.08 Gy, respectively. Conclusions: Texture analysis can be used to accurately convert microscopic structural changes to the EBT3 film's surface into absorbed doses. Our proposed method is feasible and may improve the accuracy of film dosimetry used to protect patients from excess radiation exposure.

간의 단일선원 Twin Beam과 이중선원 이중에너지 전산화단층촬영의 비조영증강 영상과 가상 비조영증강 영상의 비교 연구 (Comparison of True and Virtual Non-Contrast Images of Liver Obtained with Single-Source Twin Beam and Dual-Source Dual-Energy CT)

  • 이정섭;최국명;김봉수;고수연;이경렬;김정재;김두리
    • 대한영상의학회지
    • /
    • 제84권1호
    • /
    • pp.170-184
    • /
    • 2023
  • 목적 Twin beam dual-energy CT (이하 tbDECT)와 dual source DECT (이하 dsDECT)를 통해 얻은 true non-contrast image (이하 TNC)와 virtual non-contrast image (이하 VNC)의 attenuation values 차이를 평가해 보고자 한다. 대상과 방법 간 DECT를 촬영한 62명의 환자를 대상으로 하였다(tbDECT, 32명; dsDECT, 30명). TNC와 재구성한 arterial VNC (이하 AVNC), portal VNC (이하 PVNC), delayed VNC (이하 DVNC)에서 복부내 11개 장기에 대해 attenuation values를 측정하여 비교하였다. 또한 TNC와 VNC attenuation values의 절대오차가 10 Hounsfield units (이하 HU) 이하인 비율을 구하였다. 결과 TNC와 VNC의 평균 attenuation values 비교에서 각 DECT별 33개의 항목(3시기 VNC, 11개 장기) 중 tbDECT는 17개, dsDECT 19개 항목에서 유의한 차이를 보였다(Bonferroni correction p < 0.0167). 절대오차 10 HU이하인 비율은 tbDECT의 AVNC, PVNC, DVNC에서 각각 56.7%, 69.2%, 78.6%, dsDECT는 각각 70.5%, 78%, 78%이었고, 두 DECT모두 AVNC에서 가장 낮았다. 결론 두 DECT의 VNC는 적지 않은 attenuation values 차이로 TNC를 대체하기에는 충분하지 않다.

갑상선암 수술 전 진단목적의 $^{18}F$-FDG PET/CT Dual Time Point영상에서 SUV값과 방사능 농도 측정법의 유용성 평가 (The Preoperative Diagnosis of Thyroid Cancer in $^{18}F$-FDG PET/CT Dual Time Imaging of SUV and Evaluation of Radioactivity Measurement)

  • 이현국;강현수;양승오;한만석
    • 핵의학기술
    • /
    • 제16권2호
    • /
    • pp.99-105
    • /
    • 2012
  • Purpose : This study is designed to compare two parameters reflecting $^{18}F$-FDG uptake, SUV and radioactivity, for diagnosis of thyroid cancer in dual time $^{18}F$-FDG PET/CT imaging and to find which parameter is more useful to decide whether the tumor is malignant or not. Materials and Methods : We performed retrospective study for 40 patients. All patients are diagnosed as primary thyroid cancer and examined $^{18}F$-FDG PET/CT. First, we got the dispersion of scattering beam of neck and lung apex to set a background and compared each dispersion, mean value, standard deviation of maxSUV and radioactivity. Also, mean maxSUV, ${\Delta}maxSUV$, ${\Delta}maxBq$/ml(%) and radioactivity between groups according to lesion's size based on biopsy are compared with independent-sample t-test. Results : the values that were from maxSUV and radioactivity measurement technique were compensated and calculated to practical values for mean comparison and patients were divided to two groups based on tumor size, Group1 ($size{\leq}1$ cm, n=21), Group2 (size>1 cm, n=19) for accurate comparison. In Group1, maxSUV (semi-quantitative analysis) was increased from $5.64{\pm}5.85$ (1.89~17.84) at first image to $5.90{\pm}5.01$ (1.95~18.22) at second image and radioactivity (Bq/ml) (quantitative analysis) showed similar increase from $5.93{\pm}6.38$ (2.50~16.75) at first image to $6.01{\pm}5.25$ (2.66~16.58) at second image. In Group2, TFmaxSUV was $10.54{\pm}14.36$ (2.54~33.89) in true first image, TSmaxSUV was $9.85{\pm}12.88$ (2.62~26.20) in true second image separately. The maxSUV showed a significant difference in the mean comparison between the two groups (p=0.035) But, mean radioactivity (Bq/ml) was $5.93{\pm}6.38$ (4.81~40.99) in true first image, $6.01{\pm}5.25$ (4.51~36.93) in true second image and didn't show a significant difference statistically (p=0.126) Conclusion : In diagnosis of thyroid tumor, SUV and radioactivity depending on $^{18}F$-FDG uptake showed high similarity with coefficient of determination (R2=0.939) and malignant evaluation results using dual time also showed similar aspect. Radioactivity for evaluation of malignant tumor didn't show better specificity or sensitivity than maxSUV.

  • PDF

2차원 X-밴드 위상 배열 안테나용 광 실시간 지연선로 (An Optical True Time-Delay for Two-Dimensional X-Band Phased Array Antennas)

  • 정병민;김성철;신종덕;김부균
    • 한국광학회지
    • /
    • 제16권3호
    • /
    • pp.287-294
    • /
    • 2005
  • 본 논문에서는 크로스(CROSS) 포트에 광섬유 지연선로가 연결된 $2\times2$ 광 스위치들로 구성된 광섬유 지연선로 행렬과 다파장 광원을 이용한 2차원 위상 배열 안테나(Phased Array Antenna; PAA)용 광 실시간 지연선로(True Time-Delay ; TTD)의 구조를 제안하였고, 파장 의존형 광 TTD와 파장 비의존형 광 TTD를 결합하여 10-GHz 2차원 PAA용 2-비트$\times$4-비트 광 TTD를 제작하였다. 단위 시간 지연 차이가 각각 ${\Delta}T=12ps$$\Delta\tau=6ps$인 파장 의존형 광 TTD와 파장 비의존형 광 TTD의 모든 주사각에 대해서 시간지연을 측정하였다. 파장 의존형 광 TTD의 시간 지연 오차는 지터에 의해 최대 2.8 ps가 발생하였으며, 파장 비의존형 광 TTD의 경우에는 ${\pm}0.8ps$이하의 오차가 나타났다. 제안된 2차원 PAA용 광 TTD의 구조는 1차원 선형 PAA보다 높은 이득을 얻을 수 있고, 다파장 광원을 사용하므로 광 파워 및 파장의 안정성을 확보할 수 있으며, 전기적 스위치 제어기를 이용하여 $2\times2$ 광 스위치 행렬을 열(column) 단위로 절체하기 때문에 주사 빔 제어 속도가 빠르고 구동이 간단한 장점을 갖고 있다.

Comparison of high-resolution and standard zoom imaging modes in cone beam computed tomography for detection of longitudinal root fracture: An in vitro study

  • Taramsari, Mehran;Kajan, Zahra Dalili;Bashirzadeh, Parinaz;Salamat, Fatemeh
    • Imaging Science in Dentistry
    • /
    • 제43권3호
    • /
    • pp.171-177
    • /
    • 2013
  • Purpose: The purpose of this study was to compare the efficacy of two imaging modes in a cone beam computed tomography (CBCT) system in detecting root fracture in endodontically-treated teeth with fiber posts or screw posts by selecting two fields of view. Materials and Methods: In this study, 78 endodontically-treated single canal premolars were included. A post space was created in all of them. Then the teeth were randomly set in one of 6 artificial dental arches. In 39 of the 78 teeth set in the 6 dental arches, a root fracture was intentionally created. Next, a fiber post and a screw post were cemented into 26 teeth having equal the root fractures. High resolution (HiRes) and standard zoom images were provided by a CBCT device. Upon considering the reconstructed images, two observers in agreement with each other confirmed the presence or absence of root fracture. A McNemar test was used for comparing the results of the two modes. Results: The frequency of making a correct diagnosis using the HiRes zoom imaging mode was 71.8% and in standard zoom was 59%. The overall sensitivity and specificity in diagnosing root fracture in the HiRes mode were 71.79% and 46.15% and in the standard zoom modes were 58.97% and 33.33%, respectively. Conclusion: There were no significant differences between the diagnostic values of the two imaging modes used in the diagnosis of root fracture or in the presence of root canal restorations. In both modes, the most true-positive results were reported in the post space group.