• Structural Engineering and Mechanics
• /
• v.69 no.3
• /
• pp.347-359
• /
• 2019

This paper aims to evaluate the behavior of Dorim-Goh bridge in Seoul, Korea, under static and dynamic loads effects by ambient trucks. The prestressed concrete (PSC) girders and reinforcement concrete (RC) slab of the bridge are evaluated and assessed. A short period monitoring system is designed which comprises displacement, strain and accelerometer sensors to measure the bridge performance under static and dynamic trucks loads. The statistical analysis is used to assess the static behavior of the bridge and the wavelet analysis and probabilistic using Weibull distribution are used to evaluate the frequency and reliability of the dynamic behavior of the bridge. The results show that the bridge is safe under static and dynamic loading cases. In the static evaluation, the measured neutral axis position of the girders is deviated within 5% from its theoretical position. The dynamic amplification factor of the bridge girder and slab are lower than the design value of that factor. The Weibull shape parameters are decreased, it which means that the bridge performance decreases under dynamic loads effect. The bridge girder and slab's frequencies are higher than the design values and constant under different truck speeds.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.222-224
• /
• 2022

Korea has more than 2,000 fires and more than 2,000 casualties every year. This study takes measures to facilitate the incorporation of 119 fire trucks by judging vehicles or standing signs using real-time image reading YOLO5 before the fire trucks arrive at the fire site. It is possible to shorten the time to extinguish a fire by photographing a fire site, transmitting the situation of the site, and analyzing the components of smoke to determine the type of fire. As a result, it is expected that it will be able to minimize casualties by keeping the golden time.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.17-28
• /
• 2010

A climbing lane is installed to separate low-speed traffic from high-speed traffic if drastic traffic capacity reduction is expected due to a large number of vehicles that slow down in the upward section. Existing studies on climbing lanes have focused on the designation, location of starting and ending points, and installation method of climbing lane with regard to road design standards. However, in terms of traffic operation, it was known that the climbing lanes cause traffic congestion due to the increase of traffic volumes. In this regard, this study aims to establish traffic operational guidance as to how much effects temporary closure of climbing lanes can have on traffic improvement according to the volume-capacity ratio, grade, and composition of trucks. A test section of simulated climbing lane was selected in Nakdong JC bound for Masan(136.9K~133.3K, 3.6km, 3.7%) on Jungbunaeryuk expressway to conduct VISSIM analyses, microscopic traffic simulation based on such control variables as traffic volume(v/c), grade and the trucks ratio. As a result of the analyses, it has been found that v/c and the ratio of trucks are the key variables for efficient traffic management of climbing lanes in order to relieve traffic congestion via climbing lane. If ratio of trucks are more than 50% and when v/c would be 0.8, both climbing lane would be closed and non-operated regardless of grade and ratio of trucks when v/c is 1.0. With the increased traffic due to a five-day work week system, continued peak hours during the weekday, increased and various patterns of congestion on expressway, this study would be expected to contribute to facilitating researches on flexible operational standards for road facilities.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.1
• /
• pp.76-82
• /
• 2019

This study was investigate the characteristics of GHGs ($CO_2$, $CH_4$, and $N_2O$) emissions of diesel medium duty trucks according to their various driving modes. GHGs emissions decreased as vehicle speed increased, and emissions increased after 64.7 km/h. The 4.5 ton trucks show higher values of $CO_2$, $CH_4$, $N_2O$, 35%, 25%, and 57%, respectively, comparing of the 2.5 ton trucks. Also, $CO_2$ emissions under WHVC mode were 20% lower than those under the NEDC mode. In the case of cold start condition, $CO_2$ emissions were 12-13% higher than those for hot start condition. In the future, the result of present study will provide basic data to set up GHGs emission standards for medium and heavy duty vehicles.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.187-193
• /
• 2008

Cross docking is a warehouse management concept in which items delivered to a distribution facility by inbound trucks are immediately sorted out and reorganized based on customer demands and are routed and loaded into outbound trucks for delivery to customers without actually being held in inventory in the distribution facility. In this research, the design of distribution facility for cross docking systems was studied. The objective of this research is to find the minimum number of receiving docks and shipping docks, respectively, in order to meet the daily demand of the distribution center. Two solution approaches are employed in modeling and solving the problem The first approach is mathematical modeling and the second approach is a simulation. The logic developed in the simulation model is expected to apply to the real world situation.

• Tribology and Lubricants
• /
• v.29 no.5
• /
• pp.310-317
• /
• 2013

To reduce vehicle fuel consumption due to not only driving but also air conditioning, battery-operated non-starting conditioning systems with thermoelectric modules and without mechanical elements like compressors are being manufactured for use by hybrid heavy trucks in the near future. In this study, the voltage and current consumed by a thermoelectric module were measured to determine the required battery power, and the performance of the conditioning system with air temperature, and humidity of the inlet/outlet modules and inside/outside the cabin for a truck, was evaluated using experimental apparatus under actual conditions. The results showed that, the thermoelectric module can be continously operated for about 1.5 h using existing 24 V batteries. The coefficent of performance(COP) of the cooling and heating modes was calculated to be an average 0.8-1.32. As expected, the heating performance was 30% more efficient than the cooling performance, which is general characteristic of thermoelectric modules.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.107-113
• /
• 2018

Air quality and pollution have recently become a major concern; vehicle emissions significantly pollute the air, especially in large and crowded cities. There are various factors that affect vehicle emissions; this research aims to find the most influential factors affecting $CO_2$ and $NO_x$ emissions using Adaptive Neural Fuzzy Inference System (ANFIS) as well as a systematic approach. The modified ANFIS (MANFIS) was developed to enhance modelling and Root Mean Square Error was used to evaluate the model performance. The results show that percentages of $CO_2$ from trucks represent the best input combination to model. While for $NO_x$ modelling, the best pair combination is the vehicle delay and percentage of heavy trucks. However, the final MANFIS structure involves two inputs, three membership functions and nine rules. For $CO_2$ modelling the triangular membership function is the best, while for $NO_x$ the membership function is two-sided Gaussian.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.1
• /
• pp.73-86
• /
• 2009

This paper discusses a method of determining the optimal design of a block. A horizontal layout of blocks is assumed in which transfer points are located at a side of the block. Each block has several transfer points (TPs) each of which is assigned to a group of adjacent bays and located at the center of the assigned group. The goal is to find the optimal size of a block and the optimal number of TPs while minimizing the total cost consisting of the fixed and operational cost of yard cranes (YCs), the operational cost of internal trucks, and the installation cost of TPs. Constraints on the maximum expected system time of trucks are imposed for the optimization. Formulas for estimating handling operation cycle times of a YC are derived analytically. Numerical experiments are conducted to illustrate optimal block designs for a given set of data.

• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.35-42
• /
• 2005

The purpose of this paper is to clarify analytically the relation between the characteristics and the pricing of the products of individual manufacturers, so we can offer beneficial information for designing and developing products. Light trucks of 1 ton to 4 ton have been taken up as examples. We carried out analyses based on the information on the evaluations of the functional characteristics by surveying the specifications obtained from light truck catalogues.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.725-727
• /
• 2017

In this study, a function that informs the trash can users about daily collectable trash types and the visiting schedule of collection trucks with an application-based push alarms is proposed along with other function that lets the user to receive the information regarding the volume of trash cans located near his/her residence and monthly average trash volume once the user registers his/her personal information online. This functions are used for the UX design between smart trash can and users. The proposed system allows trash collection trucks to find the most efficient path from their current positions by finding out users' trash can volumes in advance. The UX design and the smart trash can system proposed in this study aim to improve the trash processing efficiency by allowing users to check the volume of their trash.