• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.225-229
• /
• 2003

When hot strip is trimmed in the side trimming process at the entry side of tandem cold rolling mill, due to bad quality of trimming face and burr, product quality(saw ear)becomes so bad that it causes drop of yield and claim from customers. Therefore, it was examined that applying ultrasonic vibration is an effective method to improve quality of strip trimming face and decrease burr magnitude by decreasing shear force acting between strip trimming face and knife in side trimming process of cold rolling.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.101-108
• /
• 2004

It is very important to diagnose state of knife and strip cutting face in real time in the side trimming process due to improvement of quality of trimming face. In this study, diagnosis system for knife and strip cutting face was developed. CCD camera was installed at the both side of strip in the entry of burr masher roll. This system offer to operator the diagnosis result that was analyzed image obtained from CCD camera. As a result, bad quality of trimming face is decreased below 1/10 and knife breakage is detected $100\%$.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.29-34
• /
• 2006

In this paper, the mechanical characteristics of ultrasonic cold forged technology (UCFT) used for the trimming knife and the effects of ultrasonic vibration energy (UVE) into the trimming process on the state of the strip cutting face were studied. And a diagnosis system to quality control for trimming knife and strip cutting face was developed and installed in plant. By the plant application of UCFT, service life of knife was more increased over 100% than that of conventional knife. And using the developed diagnosis system, the knife breakage and saw ear have been perfectly detected and quality control of trimming face is obtained effectively.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.675-681
• /
• 2002

Parametric modeling and configuration design method are a important methods for rapid design in manufacturing. This paper proposes a relation rules which parametrically models a bonnet trimming tool based on Pro/Engineer. The concept of desogn is applied a trimming die of the bonnet outer panel. Trimming die have a many parameters. Each a parameter is related the die face and punch profile. A design system consists of a Pro/Engineer, a Pro/program.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.131-141
• /
• 2004

In this study a 3-D automatic die design supporting system for a bonnet panel has been developed using Pro/ROGRAM of the widespread CAD software Pro/ENGINEER A standard drawing die was defined in terms of the punch profile, the die face geometry, and the blank sheet size. The strip layout of a trimming die was defined, in addition, in terms of the trimming line and the locations of scrap cutters. Necessary relations for each design step are formulated and rules for bottom-up type 3-D die design were set up for the automatic design of drawing and trimming dies of a bonnet. With the input geometric data of punch profile, die face, and blank sheet, this 3-D design supporting system could complete the basic design process, in case of the bonnet drawing die, in a time 78% shorter than that required by a typical 2-D CAD system. The new design system showed remarkable design efficiency also when it was applied to the case of redesign and modification of the previous standard output for a different car type.

• 복식
• /
• 제44권
• /
• pp.104-116
• /
• 1999

This study was intended to make an inquiry into the effect of lines, shapes and colors (achromatic colors) as apparel design elements on the perceptions of facial size, brightness and shape through an empirical research based on the theories of visual perception and optical illusion that have been studied in Gestalt Psychology, which becomes the basis of apparel design principles. It was shown that the facial size was influenced by the collar size, the degree of neckline cut, and the thickness of the trimming line. The white scarf with the white jacket made the face look darkest while the black scarf with the black jacket made the face look brightest. When the neckline had the characteristic of the line contrasted with the facial shape, the oval-shaped face was perceived to be the most ideal. When the facial shape and the neckline shape were similar, the facial shape was perceived to be more highlighted.

• 산업공학
• /
• 제13권4호
• /
• pp.591-598
• /
• 2000

In this paper, an efficient algorithm is proposed to find parting lines(PL) and generate parting surfaces(PS) for an injection mold design. We used a Face-Edge Graph which can be made by B-rep information of solid model. The graph is useful for finding the peripheral-loop edges for PL and the inner-loop edges for hole-patch. The PS can be generated automatically by selecting pre-defined direction lines. We can create a core and cavity molds by trimming the raw stock block with the PS and the upper/lower faces of a product model. We implemented proposed method with Unigraphics API functions and C language, and tesed on Unigraphics V15.

• 패션비즈니스
• /
• 제18권2호
• /
• pp.14-28
• /
• 2014

This study analyzed the group of experts who were related to cubism, selected among the works of 2010~2013 Paris Collection based on F.G.R.(Focus Group Research). According to the results of this study, there were appeared first, 'a one-piece dress' second, 'H silhouette' third, 'cotton', in case of item distribution and frequency. The analysis was done by using the manner of expression, cubical expression, exaggeration, distortion, dismantlement, geometrical division of face, mix-match look, wraparound repetition, asymmetric structure, etc. Based on the outcomes of the analysis on figurative design elements, this study adjusted three manners appearing on cubism fashion style. First, it was 'avant garde manner' of constitution or 'dismantlement' which was compiled into multi-view representations of overlaps and viewpoints by repetitive use of color tone trimming detail. Second, it was 'geomagnetic block placement' which expresses cubism with geometric partitioning of surface and separation of panel by cutting disintegration. Finally, it was 'distortion and simplification of silhouette' which is a distortion created by constitution-line pressed thin with silhouette. It maximizes the beauty of human body outline, which was distorted by three-dimensional-manipulation, and simplified by ellipsis for another shape for the extension or expansion of detail trimming.

• 한국표면공학회지
• /
• 제37권1호
• /
• pp.22-27
• /
• 2004

Copper electroforming process has been applied to duplicate Koryo Tripitaka (Taejang'kyong), wooden printing block. Thin copper replica printing plates of 1 mm thickness was successfully manufactured from the printing face (54.5${\times}$25.5 cm) of wooden printing plate. Major processes are (1) silicon rubber replication of the master (2) silvering on silicon rubber (3) copper electroforming (4) separation of copper from the silicon mandrel (5) final coloring by brass plating and trimming. This process has various Potential applications in making thin metallic objects such as plaques, statues, bust and hollow metal objects for jewelry.

• 한국의류산업학회지
• /
• 제26권1호
• /
• pp.99-109
• /
• 2024

This study aimed to assess the satisfaction levels of adolescents with beauty programs, investigate the factors influencing them, and present foundational insights for designing cosmetics and beauty education initiatives tailored to adolescents. Specifically focusing on the "Safety and Use Education for Youth Cosmetics" program implemented in Gwangju Metropolitan City, it examined the satisfaction of participants, including students, instructors, and school teachers involved in the education. The study was based on action research, a qualitative methodology. The conclusions are as follows: First, participants gained knowledge and information encompassing various aspects of cosmetics, such as types, expiration dates and usage span, face wash and skin types, shampooing methods, scalp care, role and significance of sunscreen, skin trouble management, and identification of skin type, through cosmetic education programs. Second, participants learned about techniques such as eyebrow trimming, eyebrow shape correction, facial contour correction, skin blush supplementation, color makeup, personal color, and tattooing. Third, there is an urgent need to develop different educational teaching resources suitable for implementation across elementary, middle, and high schools. Fourth, it is necessary to cultivate higher-quality instructors in this digital age. Fifth, it is crucial to explore new methods of delivering beauty education to adolescents. We hope the insights gleaned from this study will serve as useful foundational data, albeit modest, fostering new beauty trends amidst the challenging landscape of youth education.