• International Journal of Aerospace System Engineering
• /
• v.9 no.1
• /
• pp.1-15
• /
• 2022

Pyrotechnic initiators provide a source of pyrotechnic energy used to initiate a variety of space mechanisms. Pyrotechnic systems build in electromagnetic environment that may lead to critical or catastrophic hazards. Special precautions are need to prevent a pulse large enough to trigger the initiator from appearing in the pyrotechnic firing circuits at any but the desired time. The EMC verification shall be shown by analysis or test that the pyrotechnic systems meets the requirements of inadvertent activation. The MIL-STD-1576 and two range safeties, AFSPC and CSG, require the safety margin for electromagnetic potential hazards to pyrotechnic systems to a level at least 20 dB below the maximum no-fire power of the EED. The PC23 is equivalent to NASA standard initiator and the 1EPWH100 squib is ESA standard initiator. This paper verifies the two safety margins for electromagnetic potential hazards. The first is verified by analyzing against a RF power. The second is verified by testing against a DC current. The EMC safety margin requirement against RF power has been demonstrated through the electric field coupling analysis in differential mode with 21 dB both PC23 and 1EPWH100, and in common mode with 58 dB for PC23 and 48 dB for 1EPWH100 against the maximum no-fire power of the EED. Also, the EMC safety margin requirement against DC current has been demonstrated through the electrical isolation test for the pyrotechnic firing circuits with greater than 20 dB below the maximum no-fire current of the EED.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.537-544
• /
• 2022

This paper analyzes the occurrence and cause of bond wires fusing used in the manufacture of pulsed high power amplifiers. Recently GaN HEMT has been spotlight in the fields of electronic warfare, radar, base station and satellite communication. In order to produce the maximum output power, which is the main performance of the high-power amplifier, optimal impedance matching is required. And the material, diameter and number of bond wires must be determined in consideration of not only the rated current but also the heat generated by the transient current. In particular, it was confirmed that compound semiconductor with a wide energy band gap such as GaN trigger fusing of the bond wire due to an increase in thermal resistance when the design efficiency is low or the heat dissipation is insufficient. This data has been simulated for exothermic conditions, and it is expected to be used as a reference for applications using GaN devices as verified through IR microscope.

• International Journal of Oral Biology
• /
• v.31 no.4
• /
• pp.113-118
• /
• 2006

In the primary sensory neuron of the mesencephalic trigeminal nucleus (MTN), the peripheral axon supplies a large number of annulospiral endings surrounding intrafusal fibers encapsulated in single muscle spindles while the central axon sends only a few number of synapses onto single ${\alpha}-motoneurons({\alpha}-MNs)$. Therefore, the ${\alpha}-{\gamma}$ linkage is thought to be very crucial in the jaw-closing movement. Spike activity in a ${\gamma}-motoneuron\;({\gamma}-MN)$ would induce a large number of impulses in single peripheral axons by activating many intrafusal fibers simultaneously, subsequently causing an activation of ${\alpha}-MNs$ in spite of the small number of synapses. Thus, the activity of ${\gamma}-MNs$ may be vital for modulation of jaw-closing movements. Independently of such a spindle activity modulated by ${\gamma}-MNs$, somatic depolarization in MTN neurons is known to trigger the oscillatory spike activity. Nevertheless, the trafficking of these spikes arising from the two distinct sources of MTN neurons is not well understood. In this short review, switching among multiple functional modes of MTN neurons is discussed. Subsequently, it will be discussed which mode can support the ${\alpha}-{\gamma}$ linkage. In our most recent study, simultaneous patch-clamp recordings from the soma and axon hillock revealed a spike-back-propagation from the spike-initiation site in the stem axon to the soma in response to a somatic current pulse. The persistent $Na^+$ current was found to be responsible for the spike-initiation in the stem axon, the activation threshold of which was lower than those of soma spikes. Somatic inputs or impulses arising from the sensory ending, whichever trigger spikes in the stem axon first, would be forwarded through the central axon to the target synapse. We also demonstrated that at hyperpolarized membrane potentials, 4-AP-sensitive $K^+$ current ($IK_{4-AP}$) exerts two opposing effects on spikes depending on their origins; the suppression of spike initiation by increasing the apparent electrotonic distance between the soma and the spike-initiation site, and the facilitation of axonal spike invasion at higher frequencies by decreasing the spike duration and the refractory period. Through this mechanism, the spindle activity caused by ${\gamma}-MNs$ would be safely forwarded to ${\alpha}-MNs$. Thus, soma spikes shaped differentially by this $IK_{4-AP}$ depending on their origins would reflect which one of the two inputs was forwarded to the target synapses.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.158-170
• /
• 2004

Mobile IP is a base protocol to support host mobility in IP-based wireless network. It is well known that the protocol contains two main delay factors on a handoff process; one is to detect a host movement, and the other is to register the host's current location to its home network. This paper examines Layer 2(L2) handoff procedure in the IEEE 802.11 Wireless LAN, and identifies these L2 triggers that can be usefully applied to Layer 3(L3) handoff. Then, the MCAA(Multiple-Casting using Anchor Agent) mechanism is proposed. It makes use of the L2 trigger and the network topology to construct an anchor agent dynamically, and the multiple-casting scheme to prevent an ongoing packet to be lost. Using a network simulator, the proposed mechanism has been evaluated the handoff delay and the packet lost point of view, in comparison with the regional registration protocol which is the most well known micro mobility support mechanism.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.35-38
• /
• 2018

This paper describes a low-power MPPT interface for DC-type energy harvesting sources. The proposed circuit consists of an MPPT controller, a bias generator, and a voltage detector. The MPPT controller consists of an MPG (MPPT Pulse Generator) with a schmitt trigger, a logic gate operating according to energy type (light, heat), and a sample/hold circuit. The bias generator is designed by employing a beta multiplier structure, and the voltage detector is implemented using a bulk-driven comparator and a two-stage buffer. The proposed circuit is designed with $0.35{\mu}m$ CMOS process. The simulation results show that the designed circuit consumes less than 100nA of current at an input voltage of less than 3V and the maximum power efficiency is 99.7%. The chip area of the designed circuit is $1151{\mu}m{\times}940{\mu}m$.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.5
• /
• pp.47-58
• /
• 2021

Purpose - Current research aimed at exploring the effect differences between the two types of processing product information such as the imagining and the considering on psychological product ownership which could influence the intent to purchase or use the product, and focused on identifying the interaction effects of activated memory information type and advertising information type on each of the information processing types. Research design, data, and methodology - This study divided the information processing types into imagining and considering, and the consumer's memories were divided into autobiographical or episodic and semantic memory. The advertising information was approached in each of event information being together with the product and product feature information. At empirical study, 2(two types of memory activation: episodic and semantic memory activation) ∗ 2(two types of advertising information: event-focused and product feature-focused advertising information) between-subjects design was used to make four types of questionnaire according to the type of experimental groups. Through the survey platform, 'questionnaire stars' of 'WeChat' in China, 219 questionnaire data were collected for empirical study. The structural equation model in AMOS 26 and Anova were used to verify hypotheses. Results - First, the ownership affected the usage intent positively. Second, the imagining did not affect the psychological ownership but did directly affect the usage intention, and the considering affected the ownership positively. Third, the episodic memory activation positively influenced the imagining and negatively affected the considering, whereas the semantic memory activation positively influenced the considering and negatively affected the imagining. Fourth, event-advertising information increased the effects of the activated episodic memory on the imagining, and feature-advertising information increased the effects of the activated semantic memory on the considering. Conclusions - marketers should develop and advertise their product-related event message to trigger the imaging that directly increase the intent to purchase or use their product, when consumers are under the activation of their episodic memory. And marketers should advertise their product feature-related message to trigger the considering that could induce consumers' ownership for their product to increase the intent to purchase or use their product, when they are under the activation of their semantic memory.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.12
• /
• pp.511-517
• /
• 2006

The key issues in high power, high energy applications such as electromagnetic launchers include safety, reliability, flexibility, efficiency, compactness, and cost. To explore some of the issues, a control scheme for a large current wave-forming was designed, built and experimentally verified using a 2.4MJ pulse power system (PPS). The PPS was made up of eight capacitors bank unit, each containing six capacitors connected in parallel. Therefore there were 48 capacitors in total, with ratings of 22kV and 50kJ each. Each unit is charged through a charging switch that is operated by air pressure. For discharging each unit has a triggered vacuum switch (TVS) with ratings of 200kA and 250kV. Hence, flexibility of a large current wave-forming can be obtained by controlling the charging voltage and the discharging times. The whole control system includes a personal computer(PC), RS232 and RS485 pseudo converter, electric/optical signal converters and eight 80C196KC micro-controller based capacitor-bank module(CBM) controllers. Hence, the PC based controller can set the capacitor charging voltages and the TVS trigger timings of each CBM controller for the current wave-forming. It also monitors and records the system status data. We illustrated that our control scheme was able to generate the large current pulse flexibly and safely by experiments. The our control scheme minimize the use of optical cables without reducing EMI noise immunity and reliability, this is resulting in cost reduction. Also, the reliability was increased by isolating ground doubly, it reduced drastically the interference of the large voltage pulse induced by the large current pulse. This paper contains the complete control scheme and details of each subsystem unit.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.26 no.4
• /
• pp.105-121
• /
• 2015

PDA model is new collection development method not only corresponding user's demand, but also expensing acquisition budget effectively. In the PDA model, when the trigger that indicates user's demand reaches up to treshold, e-book is automatically purchased without librarian's interrogation. This study examines concept, basic principles, and current condition of operation about PDA and finds a way that could applicate to Korean university library foreign E-book consortium. Current model of university library e-book acquisition pursuit reduction of budget and utility value, but the selected collection is not based on user's demand. Therefore, it could be considerable to apply PDA or evidence based purchase model to foreign e-book acquisition consortium.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.54-61
• /
• 1998

A new Triple well structure is proposed for improved latch-up immunity at deep submicron CMOS device. Optimum latch-up immunity process condition is established and analyzed with varying ion implantation energy and amount of dose and also compared conventional twin well structure. Doping profile and structure are investigated using ATHENA which is process simulator, and then latch-up current is calculated using ATLAS which is device simulator. Two types of different process are affected by latch-up characteristics and shape of doping profiles. Finally, we obtained the best latch-up immunity with 2.5[mA/${\mu}{m}$] trigger current using 2.5 MeV implantation energy and 1$\times$10$^{14}$ [cm$^{-2}$ ] dose at p-well

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.161-169
• /
• 2005

This paper presents the new structural Low voltage LVTSCR and TWSCR ESD protection circuit. The proposed ESD protection circuit has lower triggering voltage than conventional circuits. And the LVTSCR has the triggering voltage of 9V, current of 7mA and can pass below 0.8KV (150mA/um). The triggering voltage of the Triple-well SCR measured to 6V and the current is 40mA. By the substrate and gate bias, the triggering voltage is lowered down to $4{\sim}5.5V$.