• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.4
• /
• pp.391-400
• /
• 2016

The purpose of this study was to evaluate the difference of remineralization effects of various anti-cariogenic toothpastes on artificial carious lesions in primary and permanent teeth using quantitative light-induced fluorescence-digital (QLF-D) system. Sound human primary (n = 48) and permanent teeth (n = 48) were randomly divided into following groups : control group (Group 1), fluoride toothpaste (Group 2), functionalized tricalcium phosphate (fTCP) + fluoride toothpaste (Group 3), and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) toothpaste (Group 4). Specimens were prepared by exposure in a demineralizing solution and then treated using the different toothpastes twice daily during 14 days. All specimens were analyzed with the QLF-D system. QLF data analysis indicated three different toothpastes showed significant remineralizing effects compared to Group 1 in both primary and permanent teeth. Also, the remineralizing effects in Group 3 and 4 were significantly higher than in Group 2. This study suggested that the toothpastes containing fTCP + fluoride and CPP-ACP have the significant anti-cariogenic effects on enamel demineralization in both primary and permanent teeth, and QLF-D is an useful device to assess the incipient carious lesion and remineralization effects of the anti-cariogenic materials quantitatively. Therefore, clinicians can consider the QLF-D system for the evaluation of demineralization and remineralization in primary and permanent teeth.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.921-928
• /
• 2004

Calcium phosphate powders have been prepared by using $Ca(OH)_2\;and\;H_{3}PO_4$ solution under various conditions such as pH, calcination temperature, and reaction time. ${\beta}-TCP({\beta}-tricalcium phosphate)$and HAp(hydroxyapatite) were synthesized at pH=5.21 and pH > 7.62, respectively. From XRD results, $Ca(OH)_2\;and\;H_{3}PO_4$ solution reacted quickly to form HAp, which was structurally stable up to 16h. Calcination temperature having good crystallinity is revealed to be at $1200^{\circ}C$. SEM analysis showed that ${\beta}-TCP$ and HAp with needle type were synthesized at pH 5.21 and pH 7.62, respectively. However, at pH 9.16, tiny and homogeneous HAp having sphere was prepared and rearranged to show needle morphology. HAp synthesized at pH 9.16 was utilized as bonechina body and calcined. The sample was analyzed its crystallinity, water absorbtion, color, and shape to check physical properties.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.10-14
• /
• 2003

Coatings of hydroxyapatite (HA) and tricalcium phosphate/HA (TCP/HA) on titanium were fabricated by ion beam assisted deposition (IBAD). Significant effect of the Ca-P coatings on human Gingival Fibroblasts (HGFs) attachment and formation of type I collagen were found by using immunofluorescence microscope. TCP/HA and HA coatings exerted more HGFs attachment and collagen I formation. Comparing with HA coating, TCP/HA coating exhibited better responses during the late period of the tests. This investigation indicated that this surface modification method may enhance the biological seal at the cervical level of the titanium dental implants.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1237-1242
• /
• 2011

Calcium phosphates are very interesting materials for use as scaffolds for bone tissue engineering. These materials include hydroxyapatite (HA) and tricalcium phosphate (TCP), which are inorganic components of human bone tissue and are both biocompatible and osteoconductive. Although these materials have excellent properties for use as bone scaffolds, many researchers have used these materials as additives to synthetic polymer scaffolds for bone tissue regeneration, because they are difficult to manufacture three-dimensional (3D) scaffolds. In this study, we fabricated 3D calcium phosphate scaffolds with the desired inner and outer architectures using solid freeform fabrication technology. To fabricate the scaffold, the sintering behavior was evaluated for various sintering temperatures and slurry concentrations. After the fabrication of the calcium phosphate scaffolds, in-vitro cell proliferation and osteogenic differentiation tests were carried out.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.5
• /
• pp.237-242
• /
• 2010

Magnesium-substituted BCP (biphasic calcium phosphate) powders were prepared by incorporating small amounts of magnesium into the structure of different hydroxyapatite (HAp)/${\beta}$-tricalcium phosphate (${\beta}$-TCP) ratios through coprecipitation method. A series of magnesium substitutions ranging from 0, 0.5, and 1.0 wt%, which are comparable to the measured magnesium contents, were performed. The obtained powders were characterized by the following analytical techniques: X-ray diffraction analysis (XRD), Thermo Gravimetric Analyzer (TGA) and Fourier transform infrared spectroscopy (FT-IR). The results have shown that substitution of magnesium in the calcium-deficient apatites resulted in the formation of biphasic mixtures of different HAP/${\beta}$-TCP ratios after heating above $1000^{\circ}C$. The 1.0 wt% magnesiumsubstituted-BCP were soaked in Hank's solutions after 2 weeks to observe the morphology of the biocement, especially needle-like hydroxyapatite crystals and to estimate the length and diameter of nanoneedle crystals.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.4
• /
• pp.360-373
• /
• 2006

The purpose of this research was to investigate whether pulsed electromagnetic field (PEMF) stimulation applied to the rabbit cranial defects grafted with ${\beta}$-tricalcium phosphate (${\beta}$-TCP) could affect the new bone formation. With 16 New Zealand white rabbits under the same condition, bilateral calvarial bone defects were formed around the sagittal suture line. The defect on the left side was grafted with ${\beta}$-TCP, while on the right side was grafted by harvested autogenous bone. PEMF was applied to 8 rabbits for 8 hours per day. The bony specimen were divided into 3 groups, the group 1 was autogenous bone grafted specimen, the group 2 was ${\beta}$-TCP grafted with PEMF, and the group 3 was ${\beta}$-TCP grafted without PEMF. We investigated the bone regeneration & growth factor expression at 2, 4, 6, and 8 weeks. As a result, BMP 2 was expressed in the group 1 from 2 weeks, the group 2 from 4 weeks, and the group 3 from 6 weeks. BMP 4 was expressed in the group 1 from 2 weeks, in the group 2 and the group 3 from 4 weeks. 4. There was no significant difference in expression pattern of BMP 7, PDGF, VEGF, and TGF-${\beta}$1 during grafted bone regeneration in group 1, 2, and 3. According to our results, PEMF stimulation could be effective on the new bome formation in animal study, and have a feasibility of clinical use.

• Journal of the Korean Ceramic Society
• /
• v.55 no.6
• /
• pp.590-596
• /
• 2018

To improve the injection behavior of brushite cement, dense ${\beta}-Ca_3(PO_4)_2$ (${\beta}-TCP$) granules were added to the starting material. The spherical ${\beta}-TCP$ granules prepared by spray-drying and subsequent sintering at $1000{\sim}1200^{\circ}C$ accounted for fractions of from 0.5 to 0.7 of the total ${\beta}-TCP$. The injection behavior was evaluated by measuring the injected mass divided by the loaded mass of paste in the syringe pump. The injected amount was increased with the increase in the fraction and sintering temperature of ${\beta}-TCP$ granules, except at $1200^{\circ}C$. The increase in the fraction of ${\beta}-TCP$ and its sintering temperature resulted in a decrease in the plastic limit, which is the volume of water required to liquefy the compact. The rest water could be utilized in the cement with the reduced plastic limit for improved injectability. The amounts of rest water assigned for powdery phase were estimated, and correlated with the injectability of paste.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.979-985
• /
• 2001

Two experiments on commercial broiler chickens (3-37 d) and WL layers (252-364 d) were conducted to study the relative bioavailability of phosphorus (P) from different P supplements in comparison to tricalcium phosphate (TCP), at constant dietary calcium (Ca):P ratio. The P sources tested were dicalcium phosphate (DCP), steam sterilized bone meal (SSBM), commercial mineral mixture (CMM), phosphoric acid (PA) and a combination of CMM + PA. Fluorine (F) content in CMM and SSBM was 13.12 and 0.14 g/kg, respectively. In commercial broiler diets, DCP, SSBM or PA could be used as supplemental P sources without affecting (p<0.05) weight gain, feed intake, tibia ash and, P and Ca contents in tibia ash when compared to TCP. Severity of leg abnormality and deposition of F in bone were higher (p<0.05) in group fed CMM. P retention and serum inorganic P content was significantly reduced (p<0.05) in CMM fed birds compared to those fed TCP, SSBM, PA or CMM+PA. Among other P sources (TCP, SSBM, PA and CMM+PA) the serum inorganic P levels did not vary significantly (p<0.05). The P retention also significantly reduced in CMM fed groups compared to those fed DCP or PA. The P retention significantly increased from 0.183 to 0.216 units by supplementation of PA to CMM diet. In layers, egg production was not affected by replacing TCP with DCP, SSBM, PA or CMM+PA, but significantly (p<0.05) reduced with CMM. Feed (kg)/kg egg mass, egg weight, shell quality (shell weight and shell thickness) and serum Ca levels were not influenced by dietary variation in P source. The poor performance of both broilers and layers fed on CMM based diets could be attributed to the presence of hlgher levels of F (647.8 and 630.1 mg/kg, respectively) and low P utilization. Based on growth, bone mineralization and P retention it is concluded that DCP, SSBM or PA can be used as alternatives to TCP in broiler diets. In WL layer diets, in addition to above P sources, CMM can also be used as supplemental P source by replacing one half of P from CMM with PA without affecting egg production and shell quality.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.53.2-53.2
• /
• 2011

Ti metal has superior mechanical properties along with biocompatibility, but it still has the problem of bio-inertness thus forming weaker bond in bone/implant interface and long term clinical performance as orthopaedic and dental devices are restricted for stress shielding effect. On the other hand, despite the excellent biodegradable behavior as being an integral constituent of the natural bone, the mechanical properties of ${\beta}$-tricalcium phosphate $(Ca_3(PO_4)_2;\;{\beta}-TCP)$ ceramics are not reliable enough for post operative load bearing application in human hard tissue defect site. One reasonable approach would be to mediate the features of the two by making a composite. In this study, ${\beta}$-TCP/Ti ceramic-metal composites were fabricated by spark plasma sintering in inert atmosphere to inhibit the formation of $TiO_2$. Composites of 30 vol%, 50 vol% and 70 vol% ${\beta}$-TCP with Ti were fabricated. Detailed microstructural and phase characteristics were investigated by FE-SEM, EDS and XRD. Material properties like relative density, hardness, compressive strength, elastic modulus etc. were characterized. Cell viability and biocompatibility were investigated using the MTT assay and by examining cell proliferation behavior.

• Clinics in Shoulder and Elbow
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2018

Background: This study is performed to evaluate anchor-related outcomes and complications after arthroscopic rotator cuff repair using 30% ${\beta}$-tricalcium phosphate (${\beta}$-TCP) with 70% poly lactic-co-glycolic acid (PLGA) biocomposite suture anchors. Methods: A total of 78 patients (mean age, $61.3{\pm}6.9years$) who underwent arthroscopic medium-to-large full-thickness rotator cuff tear repair were enrolled. The technique employed 30% ${\beta}$-TCP with 70% PLGA biocomposite suture anchors at the medial row (38 patients, Healix $BR^{TM}$ anchor [Healix group]; 40 patients, Fixone anchor B [Fixone group]). The radiologic outcomes (including perianchor cyst formation or bone substitution) and anatomical outcomes of the healing failure rate were evaluated using magnetic resonance imaging at least 6 months after surgery, the pain visual analogue scale at 3, 6 months, and final follow-up visit, and American Shoulder and Elbow Surgeons scores at least 1 year postoperatively. Anchor-related complications were also evaluated. Results: The perianchor cyst formation incidence was similar for both groups (60.5%, Healix group; 60.0%, Fixone group; p=0.967), although severe perianchor cyst incidence was slightly lower in the Fixone group (15.0%) than in the Healix group (21.1%). There was no occurrence of anchor absorption and bone substitution. No differences were observed in the healing failure rate (13.2%, Healix group; 15.0%, Fixone group; p=0.815) and functional outcome between groups (all p>0.05). Anchor breakage occurred in 5 patients (2 Healix anchors and 3 Fixone anchors); however, there were no major anchor-related complications in either group. Conclusions: No differences were observed in the clinical outcomes of the Healix and Fixone groups, neither were there any accompanying major anchor-related complications.