• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.189-195
• /
• 2016

Logging equipment and method have a major influence on harvesting productivity and cost. This study investigated the productivity and operational costs of tree-length cable yarding system using HAM300, a domestically developed tower yarder. We tested HAM300 for thinning operation in Pinus densiflora stands at Gangreung, Gangwon-do on April, 2014. To assess the productivity we conducted time study for each stage of the operation. When the average time/cycle was examined for each stage of the operation, the longest was for yarding (241 sec), followed by delimbing (237 sec), felling (153 sec), and processing (103 sec). Furthermore, productivity for felling was $8.6m^3/hr$, followed by delimbing ($5.1m^3/hr$), yarding ($3.5m^3/hr$), and processing ($8.1m^3/hr$). The total cost for the tree-length logging system was $58,446won/m^3$, of which the majority was incurred by the yarding cost at $46,217won/m^3$ (79.3%), whereas the lowest cost was for felling at $2,359won/m^3$ (4.1%). We suggest that it is necessary to foster specialized operators and provide training in operating the tower yarder thereby implementing efficient harvesting system resulting from low-cost yarding.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.19-23
• /
• 1998

Water tree degradations have been considered as one of the most important causes of failure in underground distribution cables with polymeric insulation. Water tree growth is a preliminary step in the sequence of electrical tree initiation and electrical breakdown of the insulation. In this paper, needle electrode is made use of the etching methods and the pellet type specimen is made to observe the water tree in succession. In previous methods are able to observe the tree degradations without cutting and dyeing. The water tree image is recorded on VTR with CCD camera. The tree length of X, Y axis direction and aging area(treeing area) are calculated with image measurement. As a result of this study, water tree is observed by non-destructive method. Electrical tree is initiated from needle electrode tip only but water tree is initiated from total area of water electrode. Electrical tree owing to water treeing is initiated at low electric field and grown with discontinuously. Namely, water tree is shown up a different characteristics of tree growth.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1218-1224
• /
• 2016

This paper presents the results of a study on the effect of surface modified alumina nanocomposites on electrical tree growth in epoxy insulation. Treeing experiments were conducted at a fixde AC voltage (500kV/mm, 10kV/60Hz)on unfilled epoxy sample as well as epoxy nanocomposites of 4 types with different loading and surface modified GDE gram. Time for tree growth as well as tree propagation length were studied. The results show that there is a significant improvement tree propagation time compare unfilled epoxy to epoxy nano alumina composites. Different tree propagation shapes as well as slower tree growth with 4 types nano alumina composites were observed.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.795-800
• /
• 2010

Embedding a large vocabulary speech recognition system in mobile devices requires a reduced acoustic model obtained by eliminating redundant model parameters. In conventional optimization methods based on the minimum description length (MDL) criterion, a binary Gaussian tree is built at each state of a hidden Markov model by iteratively finding and merging similar mixture components. An optimal subset of the tree nodes is then selected to generate a downsized acoustic model. To obtain a better binary Gaussian tree by improving the process of finding the most similar Gaussian components, this paper proposes a new distance measure that exploits the difference in likelihood values for cases before and after two components are combined. The mixture weight of Gaussian components is also introduced in the component merging step. Experimental results show that the proposed method outperforms MDL-based optimization using either a Kullback-Leibler (KL) divergence or weighted KL divergence measure. The proposed method could also reduce the acoustic model size by 50% with less than a 1.5% increase in error rate compared to a baseline system.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1707-1718
• /
• 1996

Given a signal net N=s, 1,...,n to be the set of nodes, with s the source and the remaining nodes sinks, an MRDPT (minimum-cost rectilinear Steiner distance -preserving tree) has the property that the length of every source to sink path is equal to the rectilinear distance between the source and sink. The minimum- cost rectilinear Steiner distance-preserving tree minimizes the total wore length while maintaining minimal source to sink length. Recently, some heuristic algorithms have been proposed for the problem offending the MRDPT. In this paper, we investigate an optimal structure on the MRDPT and present a theoretical breakthrough which shows that the min-cost flow formulation leads to an efficient O(n2logm)2) time algorithm. A more practical extension is also in vestigated along with interesting open problems.

• Journal of Forest and Environmental Science
• /
• v.40 no.2
• /
• pp.111-117
• /
• 2024

An evaluation was carried out on variability in morphology of fruits and seeds (number and weight) of Tetrapleura tetraptera (Schumach. and Thonn.) Taub. from different populations across its distribution range in Nigeria. Bulk fruit samples were collected and examined for variations in morphological characters. Differences in morphological character of fruits and seeds among the populations were determined using analysis of variance at 5% level of probability. The relationships among morphological characters were determined using Pearson correlation coefficient (r). Significant variations (p<0.05) existed among T. tetraptera populations for all the evaluated characters: fruit length, fruit width, number of seeds per fruit and seed weight. A positive significant strong correlation (r=0.96) was found between seed weight and number of seeds per fruit, while no correlation existed between fruit length, width and number of seeds. Seed weight was positively correlated with minimum altitude (r=0.97) and maximum altitude (r=0.99) of seed populations. Number of seeds was also significantly correlated with maximum altitude (r=0.965). There was no significant correlation between geo-climatic variables and fruit dimensions (length and width). Observed variations in morphological traits within and across populations of T. tetraptera may be used as proxy to estimate genetic diversity and selection of superior trees for improved productivity.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.168-172
• /
• 2016

The effect of different exposed length of M.9 rootstock on growth and yield was tested in the new apple cultivars. The 'Seohong', 'Summer Dream', and 'Hongguem' grafted on M.9 rootstock were planted in March 2010. The trees were planted in such a way that the exposed length of the rootstock to be 10, 20 and 30 cm. The result showed that as decreasing exposure length, TCA of 'Seohong', 'Summer Dream', and 'Hongguem' was increased between $3^{rd}$ and $6^{th}$ year after planting. The TCA of 20 cm and 30 cm exposure length showed respectively 70% and 60% in 'Seohong', 88% and 66% in 'Summer Dream', and 55% and 41% in 'Hongguem' of the TCA with 10 cm exposure length on 6-year-old trees. Tree height, canopy width, shoot length and terminal shoot length were also increased according to decreased exposure length in 6-year-old trees. The cumulative yield of three cultivars was higher in the tree with a lower exposure length between $4^{th}$ and $6^{th}$ year after planting. The cumulative yield of 20 cm and 30 cm exposure length showed respectively 77% and 63% in 'Seohong', 85% and 76% in 'Summer Dream', and 73% and 58% in 'Hongguem' of the cumulative yield with 10 cm exposure length in 6-year-old trees. Considering tree growth and yield, the optimum exposure length of M.9 was 10 cm for 'Seohong', 'Summer Dream' and 'Hongguem'.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.71-80
• /
• 2014

Employing PTAS to building minimum spanning tree for a large number of equal distribution input terminal nodes can be a effective way in execution time. But applying PTAS to building minimum spanning tree for tremendous unequal distribution node may lead to performance degradation. In this paper, a partial PTAS reflecting the scheme into specific node dense area is presented. In the environment where 90% of 50,000 input terminal nodes stand close together in specific area, approximate minimum spanning tree by our proposed scheme can show about 88.49% execution time less and 0.86%tree length less than by existing PTAS, and about 87.57%execution time less and 1.18% tree length more than by Prim's naive scheme. Therefore our scheme can go well to many useful applications where a multitude of nodes gathered around specific area should be connected efficiently as soon as possible.

• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.441-448
• /
• 2016

The purpose of this study was to broaden our knowledge on the productivity and costs of felling operation in three different harvesting methods(whole tree, tree-length and cut-to-length). Felling was conducted in three different harvesting methods with two workers who have different work experiences. Worker A and B have had felling experiences for about 5 years and 15 years, respectively. Felling productivity in whole tree method was $10.3m^3/SMH$ for worker A and $12.7m^3/SMH$ for worker B. Felling costs for worker A and B were $2,066won/m^3$ and $2,201won/m^3$, respectively. Although felling productivity of worker B in whole tree method was higher than worker A, felling costs of worker A were similar to worker B because the wage of worker B was more expensive than the wage of worker A (p>0.05). In tree-length method, felling cost of worker B were cheaper than that of worker A. Felling productivity and cost in tree-length method were $2.2m^3/SMH$ and $9,890won/m^3$ for worker A and $3.3m^3/SMH$ and $8,459won/m^3$ for worker B, respectively (p<0.05). In cut-to-length method, felling productivity and cost were $2.3m^3/SMH$ and $9,584won/m^3$ for worker A and $3.0m^3/SMH$ and $9,395won/m^3$ for worker B, respectively. Felling productivity of worker B was higher than that of worker A(p>0.05). Our preliminary results found that harvesting methods and worker's experiences highly affect on the productivity and costs of felling operations. These results should be useful for forest managers when planning cost-effective harvesting operations.

• Journal of the Korean Society of Safety
• /
• v.6 no.2
• /
• pp.15-20
• /
• 1991

In this paper, we have investigated the effect of organic additives and prestressed D C. voltage on the impulse tree initiation in low density polyethylene. The five klnds of organic compounds was selected for the purpose of inhibiting tree initiation and 10 wt % of each additive was mixed in low density polyethylene. The positive or negative impulse voltage was applied after prestressed D.C. voltage was applied in order to investigate the effect of the space charge influenced on tree initiation. The lengths of tree initiation in case of belng same polarity between prestressed D.C. voltage and impulse voltage were longer than those in case of being different polarity between prestressed D.C. voltage and impulse voltage. When the polarity prestressed D.C. voltage was the different plarity of impulse voltage, the length of tree initiation increased with increasing the prestressed D.C. voltage and decreasing the rest time Among the organic additives used in this paper, the m-cresol can be shown to be the most effective inhibiter to tree initiation.