• Biotechnology and Bioprocess Engineering:BBE
• /
• v.4 no.1
• /
• pp.51-58
• /
• 1999

A mathematical model for a three phase fluidized bed bioreactor (TFBBR) was proposed to describe oxygen utilization rate, biomass concentration and the removal efficiency of Chemical Oxygen Demand (COD) in wastewater treatment. The model consisted of the biofilm model to describe the oxygen uptake rate and the hydraulic model to describe flow characteristics to cause the oxygen distribution in the reactor. The biofilm model represented the oxygen uptake rate by individual bioparticle and the hydrodynamics of fluids presented an axial dispersion flow with back mixing in the liquid phase and a plug flow in the gas phase. The difference of setting velocity along the column height due to the distributions of size and number of bioparticle was considered. The proposed model was able to predict the biomass concentration and the dissolved oxygen concentration along the column height. The removal efficiency of COD was calculated based on the oxygen consumption amounts that were obtained from the dissolved oxygen concentration. The predicted oxygen concentration by the proposed model agreed reasonably well with experimental measurement in a TFBBR. The effects of various operating parameters on the oxygen concentration were simulated based on the proposed model. The media size and media density affected the performance of a TFBBR. The dissolved oxygen concentration was significantly affected by the superficial liquid velocity but the removal efficiency of COD was significantly affected by the superficial gas velocity.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.204-214
• /
• 2013

This research was performed to evaluate Vibrio fischeri toxicity for TNT-contaminated soils treated by composting and slurry phase bioreactor, which were operated for 45 and 200 days, respectively. In case of composting, the GL value of acetone-added soil was 40, which was lower than th at of glucose-added soil after treatment. In case of slurry phase bioreactors under anaerobic, anaerobic/aerobic, and aerobic regimes, they showed the GL values of 6, 8, and 4 after treatment, respectively. It was evaluated that the toxicity of all slurry phase bioreactors was reduced significantly to detoxification. The relationships between GL value and the number of S. typhimurium in both composting and slurry phase bioreactor were developed as the first order equations with high correlation coefficient (r > 0.8890).

• Journal of Animal Environmental Science
• /
• v.6 no.2
• /
• pp.73-81
• /
• 2000

A two-phase anaerobic digestion system for the treatment of swine waste was constructed in a commercial hog farm. The digester system was composed of 4 major units; slurry storage pit, acidogenic digester, methanogenic digester and sedimentation pit. A biogas boiler unit was also attached to maintain the digester temperature of 37$^{\circ}C$. Substrate lading was made with 2hr-interval by pumping about 2.1$m^3$ of slurry type swine waste from the slurry pit into the acidogenic digester, which corresponds to hydraulic retention time of 4 days for the acidogenic digester and of 11 days for the methanogenic digester. Digester temperature were well maintained as the set temperature of 37$^{\circ}C$ in the methanogenic digester, while the temperature in the acidogenic digester showed around 34$^{\circ}C$. pH also showed a steady-state results of 7.3 in the acidogenic digester and of 7.6 in the methanogenic digester during the operation period. Average biogas production rate was 0.66$m^3$/$m^3$ digester volume. Reduction rate of total solid and volatile solid were 42.8% and 5.8%, respectively. Total nitrogen and ammonia nitrogen were not reduced during the anaerobic fermentation, however, most of VFAs seemed to be converted to the biogas,. These fermentation performance data may suggest that he newly developed a two-phase anaerobic digester for the swine waste treatment worked so successfully.

• Composites Research
• /
• v.26 no.2
• /
• pp.123-128
• /
• 2013

The PVDF (polyvinylidene fluoride) fibers were prepared using the wet spinning processing. To improve ${\beta}$-phase crystalline which closely related piezoelectric property PVDF wet spun fibers conducted post treatment. Post treatment is consisted of heat stretching and annealing process. The heat stretching and annealing conditions were controlled by changing temperature between glass transition temperature and melting temperature. From these experimental data, the resulting crystal structure of the ${\beta}$-phase crystalline was confirmed by FT-IR and XRD experiments. From these analysis results, optimum stretching and annealing conditions of the wet spun PVDF fibers were founded to increase high ${\beta}$-phase crystalline. Furthermore results showed that thermal processing had a direct effect on modifying the crystalline microstructure and also confirmed that heat stretching and annealing could increase the degree of crystallinity and ${\beta}$-phase crystalline. Finally, piezoelectric constant ($d_{11}$) of the post heat treated PVDF fibers reinforced composite were measured to investigate the feasibility for the sensing materials.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.21-24
• /
• 2002

Two kinds of $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$, the sintering samples and zone melting samples, were heat-treated under pure Ar at 950$^{circ}C$. The substitution of Nd ion for Ba ion in the $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$ before and after the heat treatment was investigated by XRD. In order to confirm the effects of the heat treatment, the Tc and Jc of samples with/without the heat treatment under Ar were comparatively studied. $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$ samples were oxygenated under pure oxygen at $300^{circ}C$. From the XRD pattern it was found that the sample with x<0.4 was transferred from tetragonal phase to orthorhombic phase after the oxygenation, while the sample with x>0.4 did not show the phase transition even after a long time oxygenation. Therefore, the low oxygen partial pressure (Ar+1 % O$_2$) was used for the ambient atmosphere of the zone-melting samples, which could reduce the melting temperature and depress the substitution of Nd for Ba. After the improvement in the zone-melting process, the Jc value was increased to 2 x $10^4$A/$cm^2$ (0 T, 78 K). The particle orientation and the structure of zone-melted NdBaCuO were studied by the XRD and SEM analysis.

• Journal of Surface Science and Engineering
• /
• v.52 no.4
• /
• pp.194-202
• /
• 2019

A systematic investigation was made on the influence of processing parameters such as gas composition and treatment temperature on the surface characteristics of hardened layers of low temperature plasma nitrided 316L Austenitic Stainless Steel. Various nitriding processes were conducted by changing temperature ($370^{\circ}C$ to $430^{\circ}C$) and changing $N_2$ percentage (10% to 25%) for 15 hours in the glow discharge environment of a gas mixture of $N_2$ and $H_2$ in a plasma nitriding system. In this process a constant pressure of 4 Torr was maintained. Increasing nitriding temperature from $370^{\circ}C$ to $430^{\circ}C$, increases the thickness of S phase layer and the surface hardness, and also makes an improvement in corrosion resistance, irrespective of nitrogen percent. On the other hand, increasing nitrogen percent from 10% to 25% at $430^{\circ}C$ decreases corrosion resistance although it increases the surface hardness and the thickness of S phase layer. Therefore, optimized condition was selected as nitriding temperature of $430^{\circ}C$ with 10% nitrogen, as at this condition, the treated sample showed better corrosion resistance. Moreover to further increase the thickness of S phase layer and surface hardness without compromising the corrosion behavior, further research was conducted by fixing the $N_2$ content at 10% with introducing various amount of $CH_4$ content from 0% to 5% in the nitriding atmosphere. The best treatment condition was determined as 10% $N_2$ and 5% $CH_4$ content at $430^{\circ}C$, where the thickness of S phase layer of about $17{\mu}m$ and a surface hardness of $980HV_{0.1}$ were obtained (before treatment $250HV_{0.1}$ hardness). This specimen also showed much higher pitting potential, i.e. better corrosion resistance, than specimens treated at different process conditions and the untreated one.

• The Journal of Korean Medicine
• /
• v.42 no.1
• /
• pp.59-74
• /
• 2021

Objectives: This study is to analyze Acupuncture Methods(鍼法) using Five Transport Points(五輸穴) and to consider the direction of development. Methods: This study focuses on Acupuncture Methods(鍼法) using Five Transport Points(五輸穴) that Five Phase Theory(五行學說) has been applied as a compound and it is designated Five Phase-Five Transport Points-Acupuncture Method(FPT Acupuncture Method, 五行五輸穴鍼法). Principles, Acupuncture Points(經穴), standards of diagnosis and treatment subjects of FPT Acupuncture Methods used in practices of Korean Medicine (韓醫學) were analyzed through updated literature. Next, the theoretical issues of FPT Acupuncture Methods regarding the composition of selecting exclusively on Five Transport Points(五輸穴) and targeted treatment subjects were investigated. Based upon the investigation, the future direction of development was studied. Results & Conclusions: Firstly, pattern identification and treatment of FPT Acupuncture Methods targeted mostly on Viscera and Bowels(臟腑). However, some showed the tendency to Five Phases Reductionism(五行 還元主義) which attempts to apply Five Phase Theory(五行學說) to symptoms that were not related to Viscera and Bowels(臟腑). Secondly, Five Transport Points(五輸穴) are theoretically related to 'Viscera and Bowels in Concept of Visceral Manifestation(臟象臟腑)'. Thirdly, when the cause of the symptoms exceeds the main therapeutic range of FPT Acupuncture Methods, it is effective to add Acupuncture Points(經穴) excluding Five Transport Points(五輸穴). And also, it is efficient to use Acupuncture Methods(鍼法) that is not based on principles of Five Phase Theory(五行學說). For the accomplishment, further researches on the approaches to apply basic Korean Medical principles such as Three Yin and Three Yang(三陰三陽) into Acupuncture Methods(鍼法) and Acupuncture Points(經穴) are necessary.

• Journal of Animal Science and Technology
• /
• v.66 no.3
• /
• pp.493-503
• /
• 2024

The aim of this experiment was to evaluate the effects of low crude protein (CP) level with essential amino acids (AA) addition on growth performance, nutrient digestibility, microbiota, and volatile fatty acid composition in growing pigs. A total of 160 growing pigs (Landrace × Yorkshire × Duroc [LYD]; average initial body weight 16.68 ± 0.12 kg) were randomly allotted to one of the four treatments on the basis of initial body weight. A randomized complete block design was used to conduct this experiment in the Research Center of Animal Life Sciences at Kangwon National University. There were ten pigs/replicate with four replicates in each treatment. The treatments include; CON (Control, 17.2% dietary CP level), low protein (LP)-1.10 (15.7% dietary CP level + 1.10% lysine level), LP-1.15 (15.7% dietary CP level + 1.15% lysine level), LP1.2 (15.7% dietary CP level + 1.20% lysine level). The pigs fed CON and LP-1.2 diet showed greater final body weight than that of LP-1.1 diet (p < 0.05). Although average daily gain, average daily feed intake, and feed efficiency did not show any difference in phase 2 and 3, average daily gain and feed efficiency was significantly greater in CON and LP-1.20 in phase 1. However, the average daily feed intake did not show any difference during the experimental period. Isobutyric acid and isovaleric acid composition of LP treatments were lower than CON treatment in phase 2. Total branched chain fatty acid composition was significantly lower in LP treatment in phases 1 and 2. However, there was no significant difference among treatments in phase 3. The results of this study underscore the importance of AA supplementation when implementing a low-protein diet during the early growth phase (16-50 kg) in pigs.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.4
• /
• pp.253-261
• /
• 1994

Transformation behavior and superelastic behavior of Ti-Ni-Cu alloys with various Cu content has been investigated by means of electrical resistivity measurement, X-ray diffraction, tensile test and transmission electron microscopy. Two types of heat treatment are given to the specimens: i) Solutions treatment. ii) thermo-mechanical treatment. The transformation sequence in solution treated Ti-Ni-Cu Alloys substituted by Cu for Ni up to 5at.% occurs to $B2{\rightleftarrows}B19^{\prime}$ and it proceeds in two stages by addition of 10at.%Cu, i. e, $B2{\rightleftarrows}B19{\rightleftarrows}B19^{\prime}$. Also, it has been found that Ti-30Ni-20Cu alloy transformed in one stage : $B2{\rightleftarrows}B19$. The thermo-mechanically treated Ti-47Ni-3Cu alloy transformed in two stages: B2${\rightleftarrows}$rhomboheral phase${\rightleftarrows}B19^{\prime}$, while transformation sequence in Ti-45Ni-5Cu and Ti-40Ni-10Cu alloy transformed as same as solution treated specimens. The critical stress for inducing slip deformation in solution treated and thermo-mechanically treated Ti-40Ni-10Cu alloy is about 90MPa and 320Mpa respectively.

• Korean Journal of Metals and Materials
• /
• v.49 no.3
• /
• pp.197-202
• /
• 2011

This study was carried out to investigate the precipitation behavior of ${\chi}$ phase and effect of ${\chi}-phase$ which precipitated at the initial stage of aging on mechanical properties of 25%Cr-7%Ni-4%Mo-0.2%N super duplex stainless steel. ${\chi}-phase$ was precipitated mainly at the interface of ferrite / austenite phases and inside of the ferrite phase at the initial stage of aging, and it was transformed into ${\sigma}-phase$ with an increase of aging time. The ferrite phase was decomposed into new $austenite({\gamma}_2)phase$ and ${\sigma}-phase$ by aging treatment. The hardness and tensile strength of the initial stage of aging when ${\chi}-phase$ was precipitated did not changed considerably, while elongation rapidly decreased. Accordingly, it is considered that ${\chi}-phase$ didn't affect the hardness and strength significantly, but it affected the elongation.