• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.438-441
• /
• 2000

Ozone has the advantages for the strong oxidant agents. Ozone is widely used as a disinfectant and deodorant in water treatment and biosafety cabinets. We attempted deodorization and disinfection in the piggery using ozone treatment. It was found that ozone affects deodorization of ammonia and decrease of microbial organism in the air. Concentration of ammonia decreased 50 percents and microbial organisms in the air were decreased below 10 percents. It will be useful for the application of the ozone to environmental treatment in the piggery.

• 임산에너지
• /
• 제20권2호
• /
• pp.34-40
• /
• 2001

본 연구는 IBA(indole-butyric acid) 처리가 7년생 분재 소재용 곰솔의 공중취목 부위의 뿌리 발달과 생장에 어떠한 영향을 미치는 가를 탐구하고자 2000년 4월 13일 및 6월 11일의 2회에 걸쳐 상대습도 조절이 가능한 비닐온실 내에서 실시되었다. 처리 IBA 농도는 대조구, 1000ppm 및 5000ppm의 3 수준이었다. 환상박피 부위에 대한 IBA 처리에 따른 발근 소요일을 보면, 4월 실시 5000ppm에서는 80일로 나타나 대조구 및 1000pprn에 비하여 약 20여일 정도 빠른 것으로 조사되었다. 6월 실시의 경우에는 처리농도에 관계없이 4월 보다 빨라 약 60∼66일이 소요되는 것으로 측정되었다. 4월에 실시된 IBA 처리는 박피 부위에서 발생된 뿌리 수 및 건중량에 영향을 주지 못했으나, 6월에서의 IBA 처리는 대조구에 비하여 장근과 세근의 발생 수 및 뿌리 건중량을 증가시켰다.

• 한국전기전자재료학회논문지
• /
• 제23권1호
• /
• pp.65-69
• /
• 2010

In this study, we compared two methods(an acid treatment in strong acid reflux and a heat treatment in air atmosphere) for hydrophilic surface treatment of multi-walled carbon nanotubes(MWNT) to enhance the capcity of $RuO_2$/MWNT composite electrode materials for ultracapacitor. Both treatments generated a number of defects on the surface of MWNT by the breakage of $\pi$ bond in graphene layer at which carboxyl groups were introduced. However, the degree of hydrophilicity generated by strong acid treatment was higher than that by heat treatment in air, which was revealed by the quantitative measurement of surface carboxyl groups by using Boehm titration. The increased hydrophilicity save rise to an improved dispersity of $RuO_2$ nanoparticles on MWNT. Finally, the improved dispersity resulted in the capacity enhancement of composite electrode materials for ultracapacitor.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.597-604
• /
• 2014

Laboratory-scale landfills (simulated landfills) were designed to determine the formaldehyde released into air and leachate from medium density fiberboard (MDF). Simulated landfills were constructed using cylindrical plastic containers containing alternating layers of soil and MDF for a total of five layers. The highest concentration of formaldehyde was found in the air and leachate from the MDF only treatment compared to treatments containing MDF and soil. At the end of the study (28 days), formaldehyde concentrations in air and leachate from treatments containing MDF and soil decreased by 70 percent and 99 percent, respectively, while the treatment containing MDF only still released formaldehyde into the air and leachate. Therefore, waste MDF after storing 4 weeks in water may be recycled as compost or mulch based on formaldehyde leaching. Also, these data indicate soil restricts formaldehyde release into air and leachate and provides new information about the fate of wood-based composite waste containing UF resin disposed in landfills.

• 동력기계공학회지
• /
• 제7권3호
• /
• pp.12-17
• /
• 2003

The purpose of this study is to observe the purification characteristics of NOx, CO and HC in various catalysts and excess air ratio conditions. For this purpose, we installed various catalysts on the back stream of the coaxial diffusion burner with swirler. As the result, in the case of NOx, Pt-Rh catalyst shows very high value that is more than 90%-conversion efficiency without the relation with the excess air ratio. After excess air ratio of ${\alpha}=1.14$, it shows that the conversion efficiencies were more than 80% in the every Pt catalyst in the view of conversion of every exhaust with changing of the excess air ratio.

• 열처리공학회지
• /
• 제7권3호
• /
• pp.206-218
• /
• 1994

In 50%$NH_3+Air+N_2$ atmospheres, the effect of air additions on the growth characteristics of the compound layer during oxynitriding at $570^{\circ}C$ for 2hr in carbon and alloy steels has been investigated. The ammount of apparent residual ammonia during oxynitriding has shown to be increased with air additions(9~36 Vol. %) and X-ray diffraction analysis of case oxynitreded has shown that the compound layer consist of ${\varepsilon}-Fe_{2-3}$(N, C) phase and ${\gamma}^{\prime}-Fe_4$(N,C) phase. In the case of carbon steels, the thickness of oxide layer, compound layer and porous layer and the amount of ${\varepsilon}-Fe_{2-3}$(N,C) phase in the compound layer were increased with additions of air in 50%$NH_3+N_2$ atmospheres. At the same gas composition, the thickenss of oxide layer, compound layer and porous layer in alloy steels showed slightly thin layer thickness compared to those of carbon steels and the ${\gamma}^{\prime}-Fe_4$(N,C) phase in the compound layer of alloy steels was found barely. Therefore, the most obvious effect of air addition in the gas nitriding atmosphere has been found to in crease further kinetics of nitriding reaction.

• 도시과학
• /
• 제8권2호
• /
• pp.47-52
• /
• 2019

China's rapid economic growth has also caused serious air pollution, endangering the health of the people and the good operation of the surrounding ecological environment.In this paper, the current situation of air pollution in China is briefly described, and the sources and changing trends of major air pollutants (including PM10, PM2.5, SO2, NO2, CO and O₃)are analyzed. Meanwhile, the treatment technologies and measures for atmospheric pollutants under the current situation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.315-320
• /
• 2004

Cutting fluid usually has been used in order to improve machinability, tool life, surface quality. However, problems such as pollution, costs of chip and fluid treatment caused. In this paper, compressed chilly air was used to machine aircraft parts and investigate possibility and advantage of that. The experiments were carried out in various cutting environments, such as wet and compressed chilly air. With respect to the cutting environment, compressed chilly air gave advantages such as decrease of pollution and easy chip treatment.

• 청정기술
• /
• 제13권1호
• /
• pp.1-15
• /
• 2007

미생물을 이용하여 생물분해 가능한 휘발성유기물질과 악취물질을 처리하는 생물학적 대기오염처리 기술은 기존의 일반적으로 사용되고 있는 방법에 비해 상대적으로 최근에 개발된 방법이다. 생물학적 방법에 의한 대기오염물질 처리는 기존의 처리방법을 대체할 수 있는 방법으로 각광을 받고 있다. 생물학적 처리방법은 유기화합물 또는 악취가 포함된 저농도 고유량의 공기를 처리하는데 효과적이다. 생물학적 처리방법은 기존의 소각 또는 흡착 방법에 비해 여러 장점을 가지고 있다. 주요 장점으로 처리비용이 저렴하고, 2차 오염물질이 발생되지 않으며, 화학물질이 사용되지 않고, 에너지 사용이 적으며, 상온에서의 운전 등이다. 생물학적 방법중 생물여과법, 생물살수여과법, 생물세정법 세가지 방법이 널리 이용되고 있다. 이들 방법중 생물여과법이 가장 많이 이용되고 있으나 실제 적용에 있어 여러 제약이 있어 이를 해결하기 위한 생물학적 방법들에 대한 연구가 수년 전부터 수행되어 왔다. 생물살수여과법은 생물여과법에 비해 다소 복잡하나 난분해성 물질이나 분해과정에서 산이 생성되는 경우 효과적으로 이용될 수 있다. 본 연구에서는 대기오염제어를 위한 생물여과법, 생물살수여과법, 생물세정법의 기본원리와 이론 및 실용적 내용을 다루었다. 특히 생물학적 방법들의 운전 인자와 성능에 미치는 영향인자 및 비용평가 등에 대해 조사 분석하였으며, 생물살수여과법에 대해서는 좀 더 집중적으로 고찰하였다.

• 한국염색가공학회지
• /
• 제34권3호
• /
• pp.173-184
• /
• 2022

In this study, the TPU film was laminated on an aramid fabric or circular knits in order to implement an air cushion material that can respond to high impact forces in case of a fall and is easy to expand. To increase the bonding strength between the fabric layer and the film layer, a primer layer was formed in two ways: one for thermally bonding and laminating PET film and two for coating and aging hot melt type PUR adhesive. The tensile strength of the aramid air cushion was 2.5 times higher than that of the circular knits, but the tensile elongation of the aramid air cushion was very low compared to that of the circular knits. The tear strength of the aramid air cushion was about twice or more superior to that of the circular knits, the primer treatment method was good at A, and the peel strength was excellent at method A. The aramid air cushion was the lightest in weight. Summarizing the above results, it was best to combine the air cushion material with aramid woven fabric and primer treatment method A to cope with the high impact force applied when falling.