• 복식문화연구
• /
• 제11권3호
• /
• pp.423-430
• /
• 2003

Cotton fabric md nylon fabric were chosen as base fabric specimens for dyeing using Japanese pagoda tree colorants through chitosan, treatment. With the chitosan treatment, the dye-uptake of the treated fabric increased. This treatment is also expected to be effective in terms of environment-friendliness. The effect of the dyeing methods, mordanting or non-mordanting, and chitosan treatment on the dye-uptake and air permeability of the treated fabrics was investigated. In case of cotton fabric, Al mordanted dyeing resulted in higher dye-uptake through the chitosan treatment. Therefore, the chitosan treatment is effective in this case. Japanese pagoda tree seems to have direct affinity for nylon fabric without the mordanting treatment. In case of cotton fabric, it seems that the cellulose molecules, colorants, and the chitosan make a complex, thereby reducing the air permeability. In case of nylon fabric, due to the fact the Japanese pagoda tree colorant molecules form direct physical bonding with the nylon molecules, it seems that there is not much of air permeability reduction.

• 설비공학논문집
• /
• 제25권7호
• /
• pp.386-391
• /
• 2013

The dynamic characteristics of both raw-water source and air source heat pump utilized in water treatment facilities were investigated by using TRNSYS simulator. The modeling of the raw water source heat pump was verified by the measured data at the Cheongju water treatment facility, and the modeling at the air source heat pump was verified by the data from the Siheung water treatment facility. The average heating and cooling COPs from the raw-water source heat pump were higher than those of the air source heat pump by 19% and 18%, respectively. The power consumptions of the air source heat pump for the cooling and the heating were higher than those of the raw water source heat pump by 28% and 26%, respectively.

• 한국대기환경학회지
• /
• 제19권1호
• /
• pp.101-112
• /
• 2003

Biological methods are frequently used for treatment of contaminated air, containing volatile organic compounds and odor compounds in low concentrations and high flow rate of air streams. For more than 20 years. biofilter has been recognized as a cost effective technology for the purification of contaminated air. Most commercial applications before 1990 were for control of odors. In the past decades major progress has been accomplished in the development of vapor phase bioreactor. in particular biotrickling filers. Biotrickling filters are more complex than biofilters. but are usually more effective, especially for the treatment of compounds which are difficult to degrade or compounds that generate acidic by-products. While the level of understanding of biotrickling filtration process for VOCs still remains limited. the evidence success of biotreatment of VOC in air resulted in pursuing active research. This paper presents fundamental and practical aspert of VOCs treatment from air in biotrickling filter. Special emphasis is given to the operating parameters and the factors influencing performance for biotrickling filter.

• 한국기계가공학회지
• /
• 제7권1호
• /
• pp.9-16
• /
• 2008

It is important not only to reduce the casting defects of piston but also to improvement in the mechanical properties(hardness) of piston for the air compressor. The blow hole is typical casting defects in the conventional cast of aluminium alloy(AC8A-T6) piston. Because of the heat treatment method, mechanical properties of the aluminium alloy for piston was decided on the heat treatment method and cycle. Therefore, we tested on the development of mechanical properties and on the casting defects of piston for the air compressor in accordance with the heat treatment and casting condition. After the heat treatment and casting was carried out as several times, and was compared with the imported piston. As a result of several investigations; microstructure, hardness and casting defects of piston was changed under the influence of the heat treatment and casting method. When the cooling rate was controlled and the uni-cast method used, it bas the same mechanical properties and microstructure.

• International Journal of Oral Biology
• /
• 제40권2호
• /
• pp.93-101
• /
• 2015

The efficacy of air-polishing on subgingival debridement, as compared to scaling and root planning (SRP), was evaluated clinically and microbiologically. Fifteen patients diagnosed as chronic periodontitis, and having single-root tooth over 5 mm of pocket depth symmetrically in the left and right quadrant, were investigated. Subgingival debridement was performed by SRP and air-polishing. The results were evaluated and compared clinically and microbiologically. Probing pocket depth (PPD), bleeding on probing (BOP), relative attachment level (RAL) and change of gingival crevicular fluid (GCF) were assessed before treatment, and at 14 and 60 days after treatment. Microbial analysis was done pre-treatment, post-treatment, and at 14 and 60 days after treatment. Results of air polishing showed that post treatment, the PPD and BOP decreased, and attachment gain was observed. There was no clinical difference when compared to SRP. The volume of GCF decreased at 14 days, and increased again at 60 days. Compared to SRP, there was a statistical significance of the volume of GCF at 60 days in air-polishing. In the microbial analysis, high-risk bacteria that cause periodontal disease were remarkably reduced. They decreased immediately after treatment, but increased again with the passage of time. Thus, our results show that subgingival debridement by air-polishing was effective for decrease of pocket depth, attachment gain, decrease of GCF and inhibition of pathogens. Further studies are required to compare air-polishing and SRP, considering factors such as degree of pocket depth and calculus existence.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.149-154
• /
• 2018

The changes in sound absorption capability and air permeability of Malas wood after high temperature heat treatment were investigated. The average air permeability of Malas in longitudinal direction after heated under the temperature of $190^{\circ}C$ during 3 hours was about 23.48 darcys and that of control was about 3.11 darcys. The noise reduction coefficients of Malas specimens were 17% for treatment and 10% for control. The means of sound absorption coefficient of specimens in the frequency range of 50~6,400 Hz were 42% for treatment and 17% for control, respectively.

• 복식문화연구
• /
• 제11권3호
• /
• pp.431-440
• /
• 2003

The purpose of this study is to investigate the feasibility of applying the chitosan for a natural mordant. The chitosan, a natural chelate macromolecule, is acquired from the crustacean. Investigation was focused on the change of the dyeability according to the chitosan treatment based on the Caesalpinia sappan and the color change of the dyed fabric according to the application of heavy metal mordant. The change of air permeability of the fabric with the dyeing condition was also investigated systematically. The effect of dyeing with/without mordant on the air permeability of the fabric after the chitosan treatment. It seems that the increase in the dye-uptake is attributable to the fact that chitosan forms a complex with the Caesalpinia sappan and Al during mordant dyeing of cotton fabric. For nylon fabric, the darkest color was achieved on the occasion of non-mordant dyeing of the fabric. The mordant treatment or chitosan treatment, however, reduced the dyeability. While the dyed nylon fabric could maintain the same air permeability as the grey nylon fabric, the cotton fabric lowered the air permeability after dyeing.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.12.1-12.5
• /
• 2018

Background: Subcutaneous emphysema refers to swelling caused by the presence of air or gas in the interstices of loose connective tissue. In the head and neck area, it may follow the fascial planes and is characterized by sudden swelling, crepitus on palpation, infrequent pain, and air emboli on radiography. It usually occurs as a complication in dental treatment. Some reports have described subcutaneous emphysema caused by dental procedures; however, severe emphysema related to peri-implantitis after treatment has not been documented. Accordingly, the current report describes a rare case of subcutaneous cervical emphysema resulting from the use of an air-powder abrasive device to treat peri-implantitis. Case presentation: Based on a review of the existing literature and the present case, nine cases of subcutaneous emphysema due to air-powder abrasive device have been reported. In most cases, the emphysema resolved over time after treatment with prophylactic antibiotics; among these, two were related to peri-implantitis management. Conclusion: Considering the frequent use of air-powder abrasive devices to treat peri-implantitis, the potential risk of iatrogenic emphysema related to this procedure needs to be addressed more extensively.

• 약학회지
• /
• 제24권2호
• /
• pp.79-86
• /
• 1980

CO-intoxication is a serious problem in public health since the coal briquette has been used as one of fuels from 1950's. It has been discussed that the treatment with acetic acid vapor may be effective for CO-intoxication. This study was undertaken to investigate the action of acetic acid therapy, comparing with the spontaneous air treatment The acetic acid vapor was introduced to the blood combined with CO (in vivo and in vitro). The dissociation of COHb, the production of COHb, the levels of Hb and adrenaline and nor-adrenaline were measured. The effect of acetic acid vapor on dissociation of COHb was about 7-9% more effective than the spontaneous air treatment. The acetic acid vapor treatment for the dissociation of COHb was similar effect to the spontaneous air treatment. In an experiment of the combining CO gas with blood, the acetic acid vapor treatment was less effective in the production of COHb than that of spontaneous air treatment. Treatment with the acetic acid vapor to rabbit intoxicated with CO gas induced a little amount of Hb in blood comparing with the spontaneous air treatment. But, it is not a significant increment statistically. By the acetic acid vapor treatment after CO gas intoxication the adrenaline was increased and noradrenaline was decreased. With these results, it is assumed that the effect of acetic acid therapy on CO-gas intoxication would be caused by inductions of Hb and adrenaline and to be reduction of nor-adrenaline.

• 한국환경과학회지
• /
• 제29권6호
• /
• pp.623-631
• /
• 2020

This study analyzes the effect of negative air ions on the concentration of airborne particulate matter and evaluates the expected purification efficiency of open spaces for particulate matter by investigating the amount of negative air ions generated by plants. This study establishes a negative air ion generation treatment environment, plant environment, and control environment to measure the purification efficiency of particulate matter under the conditions of each, analyzing the expected purification efficiency by designing a particulate matter purification model. Results show that the amount of generated negative air ion according to environment was negative air ion generation treatment environment > plant environment > control environment; this order also applies to the particulate matter purification efficiency. Moreover, it took 65 min for the negative ion generation treatment environment, 90 min for the plant environment, and 240 min for the control environment to reach the standard expected purification efficiency of particulate matter concentration of 960 mg/㎥ for PM₁₀. For PM_2.5, with the designated maximum concentration of 700 mg/㎥, it took 60 min for the negative ion generation treatment environment, 80 min for the plant environment, and more than 240 min for the control environment. Based on these results, the expected purification efficiency compared to the control environment was quadrupled in the negative ion generation treatment environment and tripled in the plant environment on average.