DOI QR코드

DOI QR Code

Changes in Sound Absorption Capability and Air Permeability of Malas (Homalium foetidum) Specimens after High Temperature Heat Treatment

  • Kang, Chun-Won (Department of Housing Environmental Design, and Research Institute of Human Ecology, Chonbuk National University) ;
  • Li, Chengyuan (Department of Wood Science and Engineering, Beihua University) ;
  • Jang, Eun-Suk (Department of Housing Environmental Design, and Research Institute of Human Ecology, Chonbuk National University) ;
  • Jang, Sang-Sik (Department of Bio-based Materials, Chungnam National University) ;
  • Kang, Ho-Yang (Department of Bio-based Materials, Chungnam National University)
  • Received : 2018.01.29
  • Accepted : 2018.03.08
  • Published : 2018.03.25

Abstract

The changes in sound absorption capability and air permeability of Malas wood after high temperature heat treatment were investigated. The average air permeability of Malas in longitudinal direction after heated under the temperature of $190^{\circ}C$ during 3 hours was about 23.48 darcys and that of control was about 3.11 darcys. The noise reduction coefficients of Malas specimens were 17% for treatment and 10% for control. The means of sound absorption coefficient of specimens in the frequency range of 50~6,400 Hz were 42% for treatment and 17% for control, respectively.

Keywords

References

  1. ASTM 316-03 2011. Standard test methods for pore size characteristics of membrain filters by bubble point and mean flow pore test. American society for testing and materials.
  2. Hill, C.A.S. 2006. Wood modification-chemical, thermal and other processes. John Wiley and Sons Ltd., Chichester.
  3. Kang, C.-W., Choi, I.-G., Gwak, K.-S., Yeo, H.-M., Lee, N.-H., Kang, H.-Y. 2012. Changes of sound absorption capability of wood by organosolv pretreatment. Journal of the Korean Wood Science and Technology 40(4): 237-243. https://doi.org/10.5658/WOOD.2012.40.4.237
  4. Kang, C.-W., Kang, W., Chung, W.-Y., Matsumura, J., Oda, K. 2008. Changes in anatomical features, air permeability and sound absorption capability of wood induced by delignification treatment. Journal of the Faculty of Agriculture, Kyushu University 53(2): 479-483.
  5. Kang, C.-W., Kim, G.-C., Park, H.-J., Lee, N.-H., Kang, W., Matsumura, J. 2010. Changes in permeability and sound absorption capability of yellow poplar wood by steam explosion treatment. Journal of the Faculty of Agriculture, Kyushu University 55(2): 327-332.
  6. Kang, C.-W., Lee, Y.-H., Kang, H.-Y., Kang, W., Xu, H.-R., Chung, W.-Y. 2011. Radial variation of sound absorption capability in the cross sectional surface of yellow poplar wood. Journal of the Korean Wood Science and Technology 39(4): 326-332 https://doi.org/10.5658/WOOD.2011.39.4.326
  7. Kang, C.-W., Oh, S.-W., Lee, T.-B., Kang, W., Matsumura, J. 2012. Sound absorption capability and mechanical properties of a composite rice hull and sawdust board. J Wood Sci 8: 273-278.
  8. Kang, C.-W., Park, H.-J., Jun, S.-S. 2012. Sound absorption capability and bending strength of miscanthus particle based board. Journal of the Korean Wood Science and Technology 40(1): 38-43. https://doi.org/10.5658/WOOD.2012.40.1.38
  9. Kang, H.-Y., Lee, W.-H., Jang, S.-S., Kang, C.-W. 2017. Polyethylene glycol treatment of Han-ok round wood components to prevent surface checking. Bioresources 12(2): 4229-4238.
  10. Wassilieff, C. 1996. Sound absorption of wood-based materials. Applied acoustics 48(4): 339-356. https://doi.org/10.1016/0003-682X(96)00013-8