• Korea Journal of Hospital Management
• /
• v.5 no.2
• /
• pp.22-39
• /
• 2000

The purpose of this study was to determine the difference between estimated profit and utilization of medical equipment upon purchasing and actual results at one teaching hospital in Seoul, Korea Medical equipments over $100,000 from 1992 to 1997 were selected and results were as follows: 1. Twenty equipments out of thirty exceeded estimated profits and the difference was 3.98 billion won and ten equipments did not reach the estimated profits and 5.5 billion won was the difference. Diagnostic equipment exceeded the estimated profit which surgical equipment didn't. 2. Eleven equipments exceeded estimated utilization, which showed 100%. In the mean time, eighteen equipments didn't reach the estimated utilization, which was 71%. Diagnostic equipment showed the less estimated utilization than surgical equipment 3. Twenty-one equipments showed the 6.83 billion won profits and nine equipments showed the 1.6 billion won deficits. Diagnostic equipment was more profitable than surgical equipment. Finally. diagnostic equipment helped improving hospital management than surgical equipment. 4. Main factors which showed the big difference from the initial plan were lacking reasonable estimated method, no evaluation system for purchase, emphasis in medical treatment, excessive expenditure in maintenance, duplicated investment for medical equipment and leadership commitment. As a result. Substantial planning is required from the requesting department in consideration of estimated profit and utilization and systematic quality control is needed to confirm. Also, One-sided decision making should be avoided to purchase a high cost medical equipment and efforts should be made in examining carefully and developing a reasonable analytic method.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.273-277
• /
• 2005

The large particles of suspended matter in raw water can be removed by allowing them to settle out in a presedimentation basin. But there are smaller particles in almost all surface water and some groundwater that will not settle out within a reasonable time without some help to accelerate the process, In the coagulation and flocculation processes, nonsettleable solids are converted into large and heavier settleable solids by physical-chemical changes broght about by adding and mixing coagulant chemicals into the raw water. The object of this research was to improve corrective injection method for low dissolution liquid in the water treatment plant. A sort of chemical feed equipment are diaphram pump, flow control in combined magnetic flowmeter md control valve, roto dipper wheel system and tube pump. Particularly low dissolution liquid (Calcium Hydroxide) put in a bit by feed equipment, tube pump is very useful method for corrective injection method in the water treatment plant.

• Nuclear Engineering and Technology
• /
• v.40 no.3
• /
• pp.163-174
• /
• 2008

As part of the spent fuel treatment program at the Idaho National Laboratory, a vacuum distillation process is being employed for the recovery of actinide products following an electrorefining process. Separation of the actinide products from a molten salt electrolyte and cadmium is achieved by a batch operation called cathode processing. A cathode processor has been designed and developed to efficiently remove the process chemicals and consolidate the actinide products for further processing. This paper describes the fundamentals of cathode processing, the evolution of the equipment design, the operation and efficiency of the equipment, and recent developments at the cathode processor. In addition, challenges encountered during the processing of irradiated spent nuclear fuel in the cathode processor will be discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.4
• /
• pp.642-652
• /
• 2010

This study examines the inconveniences and problems of established safety-equipment by investigating the actual conditions for elderly people who use welfare services such as wheel chairs provided by care institutions. Suggestions will be made on how to improve the function and convenience of use to suit the needs of the elderly and how to create beautiful wheel chair safety-wear. Medical treatment helpers for the elderly were surveyed about the wearing conditions of wheel chair safety equipment. The present wheel chair safety equipment was shown to be aesthetically unpleasant; in addition, feelings of restriction and unpleasantness were noted (concerning the wearing of the equipment). In addition, there was no feeling of fixed stability. The wheel chair safety-wear that has been designed reflects the inconveniences and problems of current wheel chair safety equipment in material, design, and patterns along with the results of those surveys. Both objective and subjective tests compared the manufactured safety-wear with current equipment. According to the results, the new safety-wear is superior than existing ones.

• Nano
• /
• v.13 no.12
• /
• pp.1850145.1-1850145.8
• /
• 2018

In this study, a double-solvent radiation method is proposed to prepare silver nanoparticles in the pores of metal-organic framework MIL-101(Cr). The results reveal that well-dispersed silver nanoparticles with a diameter of about 2 nm were successfully fabricated in the cages of monodisperse octahedral MIL-101(Cr) with a particle size of about 400 nm. The structure of MIL-101(Cr) was not destroyed during the chemical treatment and irradiation. The resulting Ag/MIL-101 exhibits excellent catalytic performance for the reduction of 4-nitrophenol. This method can be extended to prepare other single or bimetallic components inside porous materials.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.4
• /
• pp.7-14
• /
• 2020

Purpose: The purpose of this study is to provide basic information for the establishment of a Heavy Ion Therapy center by analyzing the cases of Heavy Ion Therapy devices, introducing the equipment and space composition of Heavy Ion Therapy equipments. Methods: This study is carried out by study the Heavy Ion Therapy, by figure out status of the installation of treatment centers around the world and by analyze the composition of Heavy Ion Therapy equipments and spaces through case studies. Results: The results of this study, which investigated the treatment of Heavy Ion Therapy and analyzed the plans of the five Heavy Ion Therapy centers, are summarized as follows. 1) Heavy Ion equipment requires a significant floor area. Vertical as well, many cross-sectional areas need to be secured for the construction of a delivery system. The Heavy Ion Therapy device should be built as a shielded wall because of the radiation leaking. Therefore, it is necessary to consist of a independent treatment center. 2) The size of Heavy Ion devices is getting smaller. Linac can be put into syncrotron. and the size of syncrotron, delivery system, and rotating-gantry is getting smaller. 3) Japan is often installed for treatment, and control rooms are integrated, while Europe has secured research space and each control room is separated. Implications: People are not familiar with the Heavy Ion Therapy. And the effectiveness of the treatment is not well promoted yet. Hopefully, more attention will be paid to the research involved in the Heavy Ion Therapy.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.375-388
• /
• 2017

Wastewater treatment (WWT) technology has been developing from simple pollutant treatment to energy and resource-saving advanced technology, and various technologies combined with IT and BT are developed to minimize the amount of pollutant and toxic substance discharge to the public water areas and to improve operational efficiency. To examine the development trend of domestic wastewater treatment technology, the registered patent technologies were surveyed, classified and analyzed by year and sector. This paper considers the status of patent registration related to WWT from 2010.1 to 2017.5 in terms of the number of specific technical areas, and the trends are analyzed based on the 10 categorization field such as biological and physicochemical treatment process, equipment and device, material, sludge treatment, membrane, process control and 42 specific technical areas. A total of 3,356 patents have been registered since 2010, and the number of patents has been decreasing since the peak at 2013 and maintains 3~400 per year. The total number of patents has not yet been less than other countries, but the number of patents of more advanced technologies, which can lead the global market, such as process monitoring, new concept processing and equipment technologies is still insufficient compared to developed countries.

• 수도
• /
• s.62
• /
• pp.54-68
• /
• 1993

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.3-6
• /
• 2008

Heat release characteristics of live fire load are an important parameter for performance oriented fire safety design of a building. While investigations have been carried out on the fire load and its burning behavior in office, residential and commercial buildings and so on, little effort has been paid for the rational treatment of fire load in bookstore. In this report, burning behavior of typical combustible objects in bookstore are studied by measuring heat release rates of bookshelf with book.

• Korean Institute of Interior Design Journal
• /
• v.14 no.1
• /
• pp.100-108
• /
• 2005

If remodeling is defined as activities that restore the overall function of a building up to the standards currently demanded rather than as a simple replacement or repair of old facilities and equipment, the main task of remodeling should be the reduction in differences between areas, establishment of a functional linkage between departments and setup of a smooth circulation system. Therefore, this study is an analysis of remodeling strategies and construction processes to resolve major tasks of remodeling. Through this research we acquire concluding remarks. 1) The remodeling strategies of equipment-intensive areas can be divided into two measures: utilizing the existing buildings (the main buildings) the most, and of concentrated relocation in the new buildings. The former method is advantageous in that the main building serves as a center in hospital layouts because concentrated placement of the diagnosis/ treatment area and the supply area benefit the overall operation in terms of functions. However, the measure has limits in that it is difficult to install the facilities and equipment of the new demands due to the low ceilings, which serve as a potential challenge in future growth and changes. 2) The latter measure is the one in which equipment-intensive areas and the areas that are absolutely short of space are first placed in the new buildings while other areas (the outpatient area, the administration area and the miscellaneous areas) are in the existing building (main building). Given the possibility of development In the future, concentrated placement in the new buildings can be said to be more effective order to actively address future growth and changes.