• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.7-18
• /
• 2012

This study suggested a method of forecasting market-share of each mode after introducing new urban rail transit lines. The study reflected the observed market share of presently operating urban rail transit into forecasting process in order to improve accuracy in predicting market share of each modes. For more realistic representation of the forecasting model, we categorized O/D pairs according to attributes of trip distance, access time and number of transfers. The analysis results of traveler's mode choice behavior with observed data showed that the trip distances are longer, the share of urban rail tends to be higher, and that the number of transfers is fewer and the access times are lesser, the share of urban rail also tends to be higher. Then, incremental logit model was used in estimating mode choice probabilities for O/D pairs along with rail transit lines while utilizing observed market shares of each modes and differences in transit service level. As the next step, the market share of rail transit after introducing new rail transit lines was forecasted by using incremental logit model with the intial share values calculated the previous analysis step. It also reflected changes in level of service for automobile in highway due to changes in highway systems and changes in mode shares after introducing new lines of rail transit. It can be expected that the proposed method would more realistically duplicates phenomena of mode choice behavior for rail transit and that it would be more theoretically logical than the typical existing methods using SP data and incremental logit model or using addictive logit model in this country.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1517-1524
• /
• 2014

In recent years, the interest of environmental-friendly transportation modes has been growing. This is because of social and environmental problems such as increasing gas price and climate change. In Europe, bike-sharing service, one of the environmental-friendly transportation modes, has been already operated. Bike-sharing service named "Tashu" has been operated in Daejeon city since 2009. This study is a fundamental research to increase utilization efficiency of bike-sharing service and to decide optimal locations of bike stations. In addition this study examines characteristics of bike usage and analyzes factors affecting to demands using multiple regression model. Based on the result of examining of characteristics of bike usage, the rate of bike usage is higher compared with installation rate of public bike stations near parks in Daejeon. In addition demands of bike usage in weekend is higher than in weekday. It reveals that the main purpose of bike usage could be recreational activities. The return rate at the same location with rental station is comparatively high. Moreover, bike usage pattern is biased in specific areas (Dunsan and Yuseong) because bike-sharing stations are not equally located. As a result of multiple regression model, the factors affecting to demands are number of passengers in buses, length of bike lanes, parks, distance to waterfront, and rate of young people. A statistical significance of factors (r-square) is 0.748, which has strong relationship.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.223-230
• /
• 2011

According to EMEP/EEA Emission Inventory Guidebook, the emissions produced by vehicle in cold start phase should be calculated differently compared to hot start phase. In this study, considering this driving cycle, more appropriate procedures for estimating Environmental Benefits was suggested. Using Tier 3 standard, all links within the impact area were included in estimating emissions. Traffic volume and travel distance were analyzed using EMME/3 software. For application of the procedures in this study, the case study was carried out with real transportation project. As a result, the Environment-Benefits increased by 30%. If the methodology suggested in this study is applied to feasibility study it will help to activate the investment of the environment-friendly modes like railway in the future.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.284-290
• /
• 2009

As the increased importance is placed on the new transit systems owing to the environmental pollution caused by the road traffic congestion, the policy for the introduction of the new transit systems as an alternative solution to ease the heavy burden of the construction expenses is being actively established. Since the explicit recognition of such transit systems and the review on the method of its adoption have been a pressing matter in the light of reducing the pending traffic congestion, the development of the rolling stock systems in modes of new transportation has been made in various ways taking into consideration the regional circumstances to alleviate traffic congestion, and offer a more efficient service with the application of their intrinsic characteristics. Such systems also have been developed as a mix of punctuality for railway systems operating on the runway and flexibility for buses. This paper, therefore, deals in more detail with 3 modes of systems such as low-floor articulated buses, GRT(Guided Rapid Transit) and tram cars, and studies the overseas cases of the operation of those systems involving both negative and positive aspects.

• International Journal of Computer Science & Network Security
• /
• v.21 no.3
• /
• pp.198-205
• /
• 2021

For twenty years, in the EU there has been a trend of a lack of maritime infrastructure and a redundance of the road one, which has a negative impact on the economy. The intermodal transport market structure in the EU has not changed over the past ten years. The stability of transport systems due to the lack of changes in the transport market remains under threat, affecting supply chains and networks through the optimization of warehousing and transportation costs. The research methodology is based on a quantitative assessment of cause-and-effect relations between economic growth and transport and logistics in the EU. A statistical analysis of security indicators, intermodal and modal transport, international trade in goods within the EU and in the world trade in goods, the dynamics of GDP of the EU countries, the level of openness of the EU economy, investment and maintenance costs of different modes of transport and infrastructure has been carried out. The results show that in 2000- 2010 there were positive changes in the transport and logistics infrastructure of the EU, which had a positive effect on trade, openness of the economy of the EU, GDP growth. However, at that time, negative effects of environmental impact and the load on road and rail transport were accumulating. Investment in different modes of transport is limited, and technical maintenance and infrastructure maintenance costs form a significant part of GDP of the EU. A slowdown in economic growth leads to budget constraints and infrastructure financing gap. As a result, the freight and passenger intermodal and modal transport market structure remains virtually unchanged. The load on rail and road transport remains stable, despite the reduced level of transport hazards. Transport productivity has declined over the past ten years. Herewith, the intensification of trade and the openness of the EU economies require constant modernization and innovative renewal. The EU policy in this direction remains normative, uncontrolled, which is reflected in investment differences within the EU and maintenance costs.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.5
• /
• pp.67-75
• /
• 2023

This paper deals with the operation of air taxis, which is one of the latest innovative technologies aimed at solving the issue of traffic congestion in cities. A key challenge for the successful introduction of the technology and efficient operation is a vertiport location problem. This paper employs a discrete choice model to calculate choice probabilities of transportation modes for each route, taking into account factors such as cost and travel time associated with different modes. Based on this probability, a mathematical formulation to maximize the utilization rate for air taxi is proposed. However, the proposed model is NP-hard, effective and efficient solution methodology is required. Compared to previous studies that simply proposed the optimization models, this study presents a solution methodology using the cross-entropy algorithm and confirms the effectiveness and efficiency of the algorith through numerical experiments. In addition to the academic excellence of the algorithm, it suggests that decision-making that considers actual data and air taxi utilization plans can increase the practial usability.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.1
• /
• pp.8-18
• /
• 2024

The present study concerns reduced order modeling of a marine diesel engine, which can be used for outlier detection in status monitoring and carbon intensity index calculation. Principal Component Analysis (PCA) is introduced for the reduced order modeling, focusing on the feasibility of detecting and treating nonlinear variables. By cross-correlation, it is found that there are seven non-linear data channels among 23 data channels, i.e., fuel mode, exhaust gas temperature after the turbocharger, and cylinder coolant temperatures. The dataset is handled so that the mean is located at the nominal continuous rating. Polynomial presentation of the dataset is also applied to reflect the linearity between the engine speed and other channels. The first principal mode shows strong effects of linearity of the most data channels to show the linearity of the system. The non-linear variables are effectively explained by other modes. second mode concerns the temperature of the cylinder cooling water, which shows small correlation with other variables. The third and fourth modes correlates the fuel mode and turbocharger exhaust gas temperature, which have inferior linearity to other channels. PCA is proven to be applicable to data given in binary type of fuel mode selection, as well as numerical type data.

• Computers and Concrete
• /
• v.34 no.4
• /
• pp.409-425
• /
• 2024

This paper utilizes LS-DYNA software to numerically investigate impact response and damage evaluation of fiber-reinforced polymer (FRP) bars-reinforced ultra-high-performance concrete (UHPC) composite beams (FRP-UHPC beams). Three-dimensional finite element (FE) models are established and calibrated by using literature-based static and impact tests, demonstrating high accuracy in simulating FRP-UHPC beams under impact loading. Parametric analyses explore the effects of impact mass, impactor height, FRP bar type and diameter, and clear span length on dynamic response and damage modes. Two failure modes emerge: tensile failure with bottom longitudinal reinforcement fracture and compression failure with local concrete compression near the impact region. Impact mass or height variation under the same impact energy significantly affects the first peak impact force, but minimally influences peak midspan displacement with a difference of no more than 5% and damage patterns. Increasing static flexural load-carrying capacity enhances FRP-UHPC beam impact resistance, reducing displacement deformation by up to 30%. Despite similar static load-carrying capacities, different FRP bars result in varied impact resistance. The paper proposes a damage assessment index based on impact energy, static load-carrying capacity, and clear span length, correlating well with beam end rotation. Their linearly-fitting coefficient was 1.285, 1.512, and 1.709 for the cases with CFRP, GFRP, and BFRP bars, respectively. This index establishes a foundation for an impact-resistant design method, including a simplified formula for peak midspan displacement assessment.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.89-102
• /
• 2006

The purpose of this paper is to develop a dynamic OD estimating model to overcome the limitation of depicting teal situations in dynamic simulation models based on static OD trip. To estimate dynamic OD matrix we used the hybrid discrete choice model(called the 'Demand Simulation Model'), which combines travel departure time with travel mode and travel path. Using this Demand Simulation Model, we deduced that the traveler chooses the departure time and mode simultaneously, and then choose his/her travel path over the given situation In this paper. we developed a hybrid simulation model by joining a demand simulation model and the supply simulation model (called LiCROSIM-P) which was Previously developed. We simulated the hybrid simulation model for dependent/independent networks which have two origins and one destination. The simulation results showed that AGtt(Average gap expected travel time and simulated travel time) did not converge, but average schedule delay gap converged to a stable state in transportation network consisted of multiple origins and destinations, multiple paths, freeways and some intersections controlled by signal. We present that the hybrid simulation model can estimate dynamic OD and analyze the effectiveness by changing the attributes or the traveler and networks. Thus, the hybrid simulation model can analyze the effectiveness that reflects changing departure times, travel modes and travel paths by demand management Policy, changing network facilities, traffic information supplies. and so on.

• Journal of Korean Society of Transportation
• /
• v.36 no.1
• /
• pp.13-22
• /
• 2018

Buses, one of the representative public transportation modes, are divided into a vareity of service types according to the purpose of operation, operating distance, and management agencies. Although bus-involved crashes may cause large amount of damage due to the higher number of passengers boarded on a bus, prior research has little focused on crash severity according to bus service types. This study aims to investigate factors influencing crash severity in bus-involved crashes and to present policy implications to reduce crash severity by bus service type. To do this, bus-involved crash data from the Traffic Accident Analysis System (TAAS) during five-year period are used. Ordered probit models for three types of bus service, i.e., city bus, suburban and express buses, and charter buses, are estimated to analyze the factors of accident severity. The results show that there are significant differences of factors affecting crash severity among the types of bus services while speed and road surface influence all the types of buses. In case of local buses, time of day, roadway alignment, and installation of a traffic signal are found to be statistically significant factors. Seat belt and road class have significant effects on injury severity of the intercity and express buses. Chartered buses have time of day, driving experience, seatbelt, traffic signal, and day of week as the significant factors. The results of this study are expected to contribute to the reduction of the crash severity by each bus service type.