• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.315-320
• /
• 2010

Recently, there are environmental issues for sustainable transportation system to pursue the energy-efficient and environment-friendly public urban transit. These transportation system needs to offer demand-oriented high-quality service being on the same level with cab service for urban space. PRT(Personal Rapid Transit), small track-guided vehicle, is repeatedly mentioned as a possible alternative for the new urban public transportion system, but but there are not many researches on the operational optimal routing for PRT network. In this paper, the concept of PRT and general optimal routing methods are reviewed. And we suggest the optimal routing method for city-wide PRT network with multi-vehicles and stations, junctions and directional arcs. Futher research directions for PRT routing are presented.

• Journal of Korean Society of Transportation
• /
• v.11 no.3
• /
• pp.49-66
• /
• 1993

The successful management of logistics in an organization requires the careful coordination and manipulation of both movement and storage. In this study, we can show what is the most efficient and the cheapest method to transport the petroleum products under a few constraints with the model of linear programming. And also, the model can give some important informations so as what is the best coverages of each terminals by types, how many products should be exchanged among each companies and which terminals or complexes are economically prior to the others. Even we can understand that the duality is one of the useful measures to evaluate the economical efficiencies of transportation and storage related elements such as complex and terminal location, transport mode, storage tankage capacity and in/outflow facilities of terminals etc.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.4
• /
• pp.164-170
• /
• 2020

Recently, the aviation industry faced a major crisis due to the impact of COVID-19. However, despite the sluggish passenger transportation, the cargo transportation sector is relatively maintained or increasing depending on the item. In this study, we will look at the trends before and after COVID-19, focusing on the cargo export field, which is a concern of the aviation industry. First, it analyzes the entire air cargo and then analyzes the trends of each item and country in detail. In particular, it examines the process of changes in air transport costs, which increased significantly immediately after COVID-19, and conducts future trends and prospects in the cargo export field. As a result of the study, some characteristics of air cargo exports before and after COVID-19 were found in an analysis by item and country, and transportation costs varied according to route distance.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.678-685
• /
• 2022

Prefabrication is a construction technique that is increasingly being applied to different building components due to its many benefits, including higher quality and lower waste. Despite these advantages, there are challenges in execution of these components on projects, due to transportation logistics, skilled labor requirements, and project management techniques. This paper investigates the current landscape of prefabricated pipe spools and potential solutions for minimizing these challenges. The scope of this research includes a proposed workflow, to standardize implementation of these components. Semi-structured interviews were conducted with industry professionals to assess current industry practices and the validity of the proposed workflow. Findings of this paper indicate that greater integration between design, fabrication and transportation is required to minimize inefficiencies when implementing prefabricated pipe spools on projects.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.71-82
• /
• 2003

The shortest path problems(SPP) are critical issues in the military logistics such as the simulation of the War-Game. However, the existing SPP has two major drawbacks, one is its accuracy of solution and the other is for only one solution with focused on just link cost in the military transportation planning models. In addition, very few previous studies have been examined for the multi-shortest path problems without considering link capacity reflecting the military characteristics. In order to overcome these drawbacks, it is necessary to apply the multi-shortest paths algorithm reflecting un-expected military incidents. This study examines the multi-shortest paths in the real networks using Shier algorithm. The network contains both military link capacity and time-based cost. Also, the modes are defined as a platoon(group) rather than unit which is used in most of previous studies in the military logistics. To verify the algorithm applied in this study. the comparative analysis was performed with various sizes and routes of network which compares with Dijkstra algorithm. The major findings of this study are as follows ; 1) Regarding the unique characteristics of the military transportation plan, Shier algorithm, which is applied to this study, is more realistic than Dijkstra algorithm. Also, the time based concept is more applicable than the distance based model in the military logistics. 2) Based on the results from the various simulations of this study the capacity-constraint sections appeared in each scenarios. As a consequence, the alternatives are necessary such as measures for vulnerable area, improvement of vehicle(mode), and reflection of separated-marching column in the military manuals. Finally. the limits and future research directions are discussed : 1) It is very hard to compare the results found in this study. which is used in the real network and the previous studies which is used in arbitrary network. 2) In order to reflect the real military situations such as heavy tanks and heavy equipment vehicles. the other constraints such as the safety load of bridges and/or the height of tunnels should be considered for the future studies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.74-88
• /
• 2020

A Cooperative Intelligent Transportation System (CITS) provides useful information on upcoming hazards in order to prevent vehicle collisions. In addition, the availability of individual vehicle travel information obtained from the CITS infrastructure allows us to identify the level of road safety in real time and based on analysis of the indicators representing the crash potential. This study proposes a methodology to derive road safety content, and presents evaluation results for its applicability in practice, based on simulation experiments. Both jerk and Stopping Distance Index (SDI) were adopted as safety indicators and were further applied to derive road section safety information. Microscopic simulation results with VISSIM show that 5% and 20% samples of jerk and SDI are sufficient to represent road safety characteristics for all vehicles. It is expected that the outcome of this study will be fundamental to developing a novel and valuable system to monitor the level of road safety in real time.

• IE interfaces
• /
• v.20 no.4
• /
• pp.469-478
• /
• 2007

Rail transportation terminals play an important role in inland transportation systems, because the operation productivity in the terminals significantly influences the efficiency of the whole transportation systems. This paper addresses a design method of a real rail terminal that satisfies a pre-specified throughput capacity. In order to construct high performance rail terminal, it is shown how design parameters can be estimated systematically. Examples of the design parameters are the number of transshipment tracks, the number of rail cranes, and the number of internal trucks. These design parameters are estimated by using simple equations and the validity of the values of these parameters are tested by using simulation. Furthermore, some iterative correction procedure, which uses the simulation technique and the equations alternately, are proposed.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.646-655
• /
• 2008

A main issue about production management of shipyards is to efficiently manage the work in process and logistics. However, so far the management of a transporter for moving building blocks has not been efficiently performed. To solve the issues, optimal block transporting scheduling system is developed for minimizing of the travel distance without overload of a transporter. To implement the developed system, a hybrid optimization algorithm for an optimal block transportation scheduling is proposed by combining the genetic algorithm and the ant algorithm. Finally, to evaluate the applicability of the developed system, it is applied to a block transportation scheduling problem of shipyards. The result shows that the developed system can generate the optimal block transportation scheduling of a transporter which minimizes the travel distance without overload of the transporter.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.153-162
• /
• 2006

The objective of this paper is to quickly examine the prosperity of a marine transportation system ana port development in the Han river Estuary and Yellow Sea border areas and to establish a cooperative management plan for the development of marine transportation and port service for cargo transportation in Seoul. as well as between South Korea and North Korea. Specifically. a development plan with a sincere effort to preserve the environment surrounding Marine Peace Park. The intent is to prove that prosperity is possible through the development of marine transportation and port service.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.163-168
• /
• 2009

Travel time reduction is a benefit in economic analysis. Freight transportation time reduction benefits influence the logistics industry. The objectives of this paper are to estimate the Value of Time (VOT) for transportation time reduction with logit methodology. The data of Gyeonggi-do's domestic road freight transport in 2007 are used. VOT was estimated for five commodities. An average VOT of 19,946 won/vehicle-hr was calculated; transport of electronic parts had the highest VOT. This study will help provide direction for improving Korea's road infrastructure for freight.