• Journal of Digital Convergence
• /
• v.16 no.8
• /
• pp.263-267
• /
• 2018

In this study, it is aimed to solve the problems of energy depletion, environmental pollution, climate change and traffic congestion in the coming generations. In Korea, the usage of public bicycle, which is a short-distance transportation system, is continuously increasing. Therefore, we analyzed the public bicycles of 'Taungryei' in Seoul and 'Nubiza' in Changwon City. We also conducted in-depth interviews with Stephen Anderson based on six principles of Creating Pleasurable Interfaces. As a result, users' discomfort was found in the functional part and the usability part of the public bicycle. Also, it was confirmed that the users were satisfied with the public bicycle in the meaningful part. Therefore, public bicycles should consider the user experience aspects to complement functional and usability parts for users.

• Resources Recycling
• /
• v.17 no.2
• /
• pp.16-29
• /
• 2008

According to the statistical data of the Ministry of Environment, 47million tons of construction waste were generated, and 96.7% of them was recycled in 2005. However, the recycled products seem to be remained under low quality. Because mixed demolition and construction waste, so called DC Waste, including concrete, brick, plaster, lumber, plastics building materials, paper and some dirt and stone, is very variable and difficult to estimate its exact composition, it is regarded as having little or no value to the construction industry. 'The Research group on recycling of construction waste' was started by the Housing & Urban Research Institute(KNHC), which is sponsored as a large scale national project by the Ministry of Construction and Transportation. This research group intends to establish recycling system through planing, processing, developing practical technology, and eventually contribute to save natural resource and to vitalize the industry. In this paper an overview of DC waste management and recycling technology is given in some detail. Particularly, "recycling law of construction waste" and recent research trends on recycling of construction waste are discussed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.2
• /
• pp.285-290
• /
• 2013

The slotless linear synchronous motor(LSM) has the advantages that the structure of the mover is simple and it can control the trust force ripple by make the magnetic energy in a gap uniform by removing a slot of the primary iron core. Also, the application of the transportation system is becoming expansion because it high efficiency drive is possible and compares with the other LSM as control is more excellent. However, the application of the living field was unsatisfactory. Therefore, in this study, we examined the drive characteristics by the position feedback control for the living field application of the slotless LSM and we prove useful of the controller through load loading and the acceleration changing to get minimization of the speed vibration and stable answer characteristics.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.439-451
• /
• 2005

This article provides a panoramic overview of the state-of-the-art technologies in the field of solid-state hydrogen storage methods. The emerging solid-state hydrogen storage techniques, such as nanostructured carbon materials, metal organic framework (MOFs), metal and inter-metal hydrides, clathrate hydrates, complex chemical hydride are discussed. The hydrogen storage capacity of the solid-sate hydrogen storage materials increases in proportion to the surface area of the solid materials. Also, it is believed that new functional nanostructured materials will offer far-reaching solutions to the development of on-board hydrogen storage system for the application of the transportation vehicles.

• Convergence Security Journal
• /
• v.13 no.4
• /
• pp.77-83
• /
• 2013

As the network composed of numerous sensor nodes, sensor network conducts the function of sensing the surrounding information by sensor and of the sensed information. The concept of the battlefield is also changing to one that includes not only physical spaces but all areas including the networks of the nation's key industries and military facilities, energy facilities, transportation, and communication networks. In light of the changing warfare in terms of how it is conducted and what form it takes, the Korea military has to seek ways to effectively respond to threats of cyber warfare. In the past, although partial strategies on cyber warfare were studied, no research was done through the overall system flow. In this paper, key variables related to cyber warfare security are classified into personnel, management, and technology. A simple model and an extended model are suggested for each area, and based on the technology area of the extended model, formal methods are used to verify the validity and a detailed response strategy is suggested according to the identified leverage.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2007.10b
• /
• pp.44-48
• /
• 2007

In recent years, the relationships and inter-dependencies between the countries in East Asia have deepened, and the vision for regional cohesion such as the East Asian Community have been gradually elaborated. A Grand Design for Northeast Asia is one of these comprehensive visions that aim to improve and develop international infrastructure through cooperation in the field of transportation, energy, environment, and information technology. This study paid attention to the possibility for a system for regional cohesion and cooperation in spatial development in East Asia, and analyzed the roles of the ESDP according to the requirements of the East Asian situation. As a result, it was understood that while the development of infrastructure is a main stream in the case of the regional cohesion in East Asia, the cooperative visions for the conservation of natural and cultural heritage, which are being positioned as an important policy in the EU, have not been seen. It is a very important subject to promote the policy cohesion/cooperation on the conservation and management of natural/cultural heritage and the development of tourism infrastructure for the sustainable development of East Asia, considering the trends in the growth of the interchange population and tourism market in East Asia. It was discussed that the role of research networks like the International Landscape Architectural Symposium of Korea, China and Japan is becoming important in supporting this policy cohesion and in grasping the present conditions and trends of the spatial development of these counties.

• Korea-Australia Rheology Journal
• /
• v.12 no.1
• /
• pp.55-67
• /
• 2000

In this paper, an experimental study of the rheological behavior of granular flow in a new type of storage silo is presented. The main characteristic of the new design is a hexagonal shape chosen with the objective of minimizing the stresses applied to the stored grains, and to reduce grain damage during the filling and emptying processes. Measurements of stress distribution and flow patterns are shown for a variety of granular materials. Because of the design of the silo, the granular material adopts its natural rest angle at all times eliminating collisional stresses and impacts between grains. A homogeneous, low friction flow is naturally achieved which provides a controlled stress distribution throughout the silo during filling and emptying. Secondary dynamic stresses, which are responsible for wall failure in conventional silos of the vertical type, are completely eliminated. A comparison between the two geometries is presented with data obtained for these silos and a number of granular materials. The discharge pattern inhibits powder formation in the silo and the filling system virtually eliminates unwanted material packing. Finally, notwithstanding the rheological advantages of this new design, the hexagonal cells that constitute the silo have many other advantages, such as the possible use of solar energy to control the humidity inside them. The cell type design allows for versatile storage capabilities and the elevation above the ground provides unlimited transportation facilities during emptying.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.3
• /
• pp.97-105
• /
• 2021

Most of the rural development projects for the welfare of residents are mainly new construction and remodeling projects for community buildings such as village halls and senior citizens. However, in the case of the construction industry, it has been studied that 23% of the total carbon dioxide emissions generated in Korea are generated in the building-related sector. (GGIC, 2015) In order to reduce the emission of environmental pollutants resulting from construction of rural community buildings, there is a need to establish a system for rural buildings by predicting the environmental impact. As a result of this study, the emissions of air pollutants from buildings in rural communities were analyzed by dividing into seven stages: material production, construction, operation, maintenance, demolition, recycling, and transportation activities related to disposal. As a result, 12 kg of carbon dioxide (CO), 0.06 kg of carbon monoxide (CO), 0.02 kg of methane (CH), 0.04 kg of nitrogen oxides (NO), 0.02 kg of sulfurous acid gas (SO), and non-methane volatile organics per 1m of buildings in rural communities It was analyzed that 0.02 kg of compound (NMVOC) and 0.00011 kg of nitrous oxide (NO) were released. This study proved that environmentally friendly design is possible with a quantitative methodology for the comparison of operating energy and air pollutant emissions through the design specification change based on the statement of the rural community building. It is considered that it can function as basic data for further research by collecting major structural changes and materials of rural community buildings.

• Asia-Pacific Journal of Business
• /
• v.11 no.3
• /
• pp.229-242
• /
• 2020

Purpose - To study the factors that are related with compliance for the voluntary surrender program of drive's license for senior drives and to estimate the rate of voluntary surrender. Design/methodology/approach - We online surveyed 147 individuals in order to analyze the intention to comply the program. The surveyees were driver's license holders aged 54 to 65 and drawn to answer their willingness to comply in a 5-point Likert scale. We developed an ordered probit model to analyze the data. Findings - According to the main results of the empirical analysis, the higher the average number of driving per week, regardless of gender and age, the more negative was the driver toward voluntarily surrender of driver's license. Various policy measures need to be prepared to activate the voluntary surrender system using the willingness to voluntarily surrender the driver's license and the characteristics of the voluntary returners, and the implementation of customized safe driving training for elderly drivers may be one such method. Research implications or originality - Population aging is known to cause various social problems, and in the transportation field, the number of elderly drivers and traffic accidents by elderly drivers are also increasing. The government is implementing a program for elderly drivers to voluntarily surrender of their driver's licenses in order to reduce traffic accidents caused by elderly drivers. If only elderly drivers who rarely drive surrender their driver's licenses then traffic accidents may not reduce as much as the program targets, however, and further policy instruments may be needed.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.3
• /
• pp.153-160
• /
• 2022

Moored floating platforms have great potential in ocean engineering applications because a mooring system is necessary to keep the platform in station, which is directly related to the operational efficiency and safety of the platform. This paper briefly introduces the technical and operational details of an optical sensor for measuring the tension of mooring lines of a moored platform in waves. In order to check the performance of optical sensors, an experiment with a moored floating platform in waves is carried out in the wave tank at Changwon National University. The experiment is performed in regular waves and irregular waves with a semi-submersible and triangle platform. The performance of the optical sensor is confirmed by comparing the results of the tension of the mooring lines by the optical sensor and tension gauges. The maximum tension of the mooring lines is estimated to investigate the mooring dynamics due to the effect of the wave direction and wavelength in the regular waves. The significant value of the tension of mooring lines in various wave directions is estimated in the case of irregular waves. The results show that the optical sensor is effective in measuring the tension of the mooring lines.