• 대한교통학회지
• /
• 제28권2호
• /
• pp.161-169
• /
• 2010

도시교통체계에 의한 에너지소비는 교통체계 자체의 특성 뿐 아니라 도시의 공간구조에도 크게 영향을 받는다. 그러나 현재까지 이와 같은 주제에 관한 연구가 매우 미미한 실정이다. 본 연구는 도시의 공간적 특성과 교통체계의 특성을 동시에 고려하고 교통 에너지 소비에 영향을 미치는 요소와 요소 간 관계 분석에 주목적을 둔다. 이를 위해 도시와 교통체계가 지닌 주요 특성을 기반으로 도시모형을 구축하여 교통체계에 의한 에너지 소비 산정식을 도출하였다. 도출된 모형과 산정식을 기반으로 에너지 소비량과 통행거리, 에너지계수 및 수단분담율이 에너지 소비에 미치는 영향을 수치적 민감도 분석을 시행하여 파악하였다. 그 결과 교통에너지 소비에 미치는 영향력으로 수단분담율이 가장 큰 것으로 파악되었으며, 또한 주거 및 고용밀도와 기술발전에 따른 에너지효율성도 에너지 소비량에 매우 민감한 변수로 파악되었다.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.324-330
• /
• 2015

Energy Saving Methods in existing railway vehicle are considered by active approach such as regenerative energy storage and utilization, eco driving, etc. On the other hands, energy saving measures in railway station are operated by passive method such as reduction of operating time in ventilation system, cooing system and power equipment. To reduce energy and for independence in railway system, it requires an active energy saving measures. It needs to its own power source besides the power source of electric supply company such as renewable energy and regenerative energy and take the advantage of power storage system and stored power are used in optimum time. This paper deal with 3-level NPC inverter and T-type NPC inverter that used in various multi-level topology applicable to the railway system.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.733-739
• /
• 2017

Research on fuel cell systems attracting attention as an environmentally friendly energy source has been actively conducted. And research is being conducted on railway vehicles that use direct current power generated by a fuel cell as an energy source. In this paper, a two-phase interleaved bidirectional DC-DC converter has been proposed which can supply electric energy of a battery to a traction motor during powering and charge the battery with regenerative energy during braking. Therefore, the topology of the energy storage system applied to the railway vehicle was analyzed, and the simulation was performed by constructing the power conversion system by this topology. Experiments were also conducted through hardware design and fabrication based on the simulation analysis results, and the validity of the hardware implementation was verified.

• 방사선산업학회지
• /
• 제17권4호
• /
• pp.321-326
• /
• 2023

Radiopharmaceuticals that need to be transported in a low-temperature state must satisfy both radiation safety and proper temperature maintenance. However, an efficient transport system considering the characteristics of radiopharmaceuticals that require low temperature maintenance has not yet existed. In order to secure a transportation system for the safe and stable transportation of the radiopharmaceutical ¹³¹I mIBG, which requires transportation in cryogenic conditions, we have developed a transportation system that can maintain cryogenic conditions below -60℃ for 6 days while stably fixing the inner container. In addition, by applying a data logger that can simultaneously measure the temperature and the dose of radiation, safety and stability in the transportation process can be secured at the same time. The cryogenic transportation system for ¹³¹I mIBG will be applied to products currently being supplied, and we expect to dramatically improve the management of cold chain radioactive material transportation.

• 설비공학논문집
• /
• 제15권12호
• /
• pp.1028-1034
• /
• 2003

The objectives of this paper are to study the effect of key parameters on the cycle performance and capacity and to estimate the cost of latent and sensible energy transportation systems. The overall conductance (UA) of each component, the ambient temperature and the absorber inlet temperature are considered the key parameters. It is concluded that COP of the solution transportation using an absorption system (STA) at ambient temperature is 10% higher than that of the conventional sensible system. It is also found that the cost of STA system can be reduced 7.5 times to that of sensible energy transportation for one year of operation with 10 km transportation distance.

• 한국항해학회지
• /
• 제9권2호
• /
• pp.27-41
• /
• 1985

The transportation productivity is the throughput of utility per locations of resources and is able to be brought forth by using transportation mode. Therefore, Oil energy is necessary for using the transportation mode that is mainly consisted of four parts trucks, railroad, ship and aircraft, and Oil quantity used for such modes is not respectively same. Noticing Such a Point, the purpsoe of this paper is to reaserch the transportation mode of convertable cargoes and to minimize energy consumption quantity by adopting such a mode. We must ttend to Energy-Intensity, Transportation, Distance and cargo quantity for selecting the transport mode to energy consumption and the minimization of transportation energy consumption is concluded in the next LP Problem. As above mentioned, we can find the solution of Xij by the LP when Xij is transportation cargo per routes, and fullfil the minimization of Energy Consumption.

• 에너지공학
• /
• 제25권3호
• /
• pp.149-156
• /
• 2016

본고의 목적은 국내 수송부문 에너지절약 및 에너지효율 향상 정책효과 분석 및 평가를 위한 기초 DB의 구축범위를 도출하는 것이다. 국내외 사례분석에 기초하여 도출한 대분류 항목은 에너지소비, 에너지원단위, 이산화탄소 또는 온실가스 배출량, 경제지표, 수송량/수송실적, 자동차 관련 기초자료 등이다. 전문가 의견조사에 의해 에너지 소비, 수송량/수송실적, 에너지효율/에너지원단위, 자동차, 에너지경제, 에너지환경 등 대분류 도출 하에, 하위 항목으로 세분하여, 각 구성항목에 대한 세부 분류에 대한 정보를 반영할 수 있는 분류지표로 설정하였다.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2103-2108
• /
• 2016

Energy saving is as important as developments of green energy and alternative energy. This paper describes design of hybrid type streetlight for railway station with renewable energy as photovoltaic, wind, secondary battery. In designing hybrid type streetlight for railway station, generation energy with renewable energy and reliability is strongly needed to meet the demand of railway station. In order to achieve the high performance of a streetlight, photovoltaic, wind and secondary battery system, PV tracker, monitoring and GUI system with logging function are designed. To verify of performance of hybrid type streetlight for railway station, we have demonstration test to get of generation energy and flow of energy and the results are present in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.966-971
• /
• 2009

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and CO2 emissions shall be addressed as important issue in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. For such new energy saving, the Energy storage system is considered for saving energy. Energy saving is possible by efficient use of regenerated energy. Regenerated energy is recycled amongst vehicles by mean of charge and discharge corresponding to powering and braking of electric vehicle operations. This energy saving contributes to cut CO2 to reduce greenhouse gas emissions. Recycling regenerated energy demonstrate significant effect on peak cut of consumption energy in railway substation. Absorption of excess energy avoids regeneration failure due to high traction voltage. This paper presents effects by applying the energy storage system to SeoulMetro Line 2.

• 융복합기술연구소 논문집
• /
• 제7권1호
• /
• pp.7-10
• /
• 2017

In general, the shoe stretcher is utilized to stretching the leather of shoe upper in the longitudinal direction. In the capstone design class, we tried to make a shoe leather stretcher for the ball of foot. Since a natural cow leather was recovered in length according to relaxation time after stretched, it was difficult to predict the initial amount of set up of stretching. In this paper, tensile and relaxation experiments were conducted in order to predict the amount of initial stretching for appropriate tensile length. Apparatus of leather stretching was designed and strains of leather were measured according to relaxation times of 12, 18, 24 hours after stretching of 24 hours. It was revealed that the ratio of the final relaxed strain and the initial applied strain was about 0.404 with R-square of 0.990 for a shoe cow leather.