• Journal of Institute of Convergence Technology
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2017

The Heat exchanger for deep geothermal system is very important to enhance the efficiency of the system. The co-axial heat exchanger is used due to the limitation of digging space. The heat transfer on the external surface of outer pipe should be high to receive a large amount of heat from the ground. However, the inner pipe should be insulated to reduce the heat loss and increase the temperature of discharge water. This study made experiment apparatus to describe the co-axial heat exchanger and measure the heat transfer coefficients on the internal and external surface. And the pin-fin was designed and fixed on the internal surface to increase the efficiency of heat exchanger. Finally, we calculated the temperature of discharge water using the heat transfer circuit of co-axial heat exchanger and heat transfer coefficient which from experimental results. The water temperature was reached the ground temperature at -500 m and following the ground temperature. When the water return to the ground surface, the water temperature was decreased due to heat loss. As the pin-fin case, the heat transfer coefficient on the internal surface was decreased by 30% and it mean that the pin-fin help to insulate the inner pipe. However, the discharge water temperature did not change although pin-fin fixed on the inner pipe.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.201-211
• /
• 2009

The types and quantities of Hazmat and Hazmat transportation are gradually increasing, keeping pace with industrialization and urbanization. At present the safety management for Hazmat transportation only considers reducing accident probability, but even when an accident involving Hazmat-carrying vehicles occurs, that is not regarded as a Hazmat-related accident if the Hazmats do not leak out from the containers carrying them. Thus the methods to reduce risk (Risk=Probability$\times$Consequence) have to be developed by incorporating accident probability and consequence. By using Geographic Information System (GIS), a technical method is invented and is automatically able to evaluate the consequence by different types of Hazmat. Thus this study analyzed the degree of risk on the links classified by the Hazmat transport pathways. In order to mitigate the degree of risk, a method of 7-step risk management on Hazmat transportation in railway industries can be suggested. (1st step: building up GIS DB, 2nd step: calculating accident probability on each link, 3rd step: calculating consequence by Hazmat types, 4th step: determination of risk, 5th step: analysis of alternative plans for mitigating the risk, 6th: measure of effectiveness against each alternative, and 7th step: action plans to be weak probability and consequence by the range recommended from ALARP). In conclusion, those 7 steps are used as a standardization method of optimum transportation routing. And to increase the efficiency of optimum transportation routing, optional route can be revise by verification.

• Spatial Information Research
• /
• v.2 no.2
• /
• pp.147-163
• /
• 1994

This paper presents three methods of generating the transportation network data out of the topological geographic database in the hope that the conversion of the geographic database file containing the topology to the conventional node-link type trans¬portation network file may facilitate the integration between transportation planning mod¬els and GIS by alleviating the inherent problems of both computing environments. One way of the proposed conversion method is to use the conversion software that allows the bi-directional conversion between the UTPS (Urban Transportation Planning System) type transportation planning model and GIS. The other two methods of data structure conversion approach directly transform the GIS's user-level topology into the transportation network data topology, and have been introduced with codes programmed with FORTRAN and AML (Arc Macro Language) of ARC/INFO. If used successfully, any approach would not only improve the efficiency of transportation planning process and the associated decision-making activities in it, but enhance the productivity of trans¬portation planning agencies.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.112-120
• /
• 2021

Recently, the number of consumers using digital online distribution platforms is increasing. This caused the rapid growth of the e-commerce market and increased delivery volume in urban areas. The logistics system, designed ar006Fund the city center to handle the delivery volume, operates a delivery system from the outskirts of the city to the urban area using cargo trucks. This maintains an ecosystem of high-cost and inefficient structures that increase social costs such as road traffic congestion and environmental problems. To solve this problem, research is being conducted worldwide to establish a high-efficiency urban joint logistics system using urban railway facilities and underground space infrastructure existing in existing cities. The joint logistics system begins with linking unmanned delivery automation services that link terminal delivery such as cargo classification and stacking, infrastructure construction that performs cargo transfer function by separating from passengers such as using cargo platform. To this end, it is necessary to apply the device to the vertical and horizontal transportation machine supporting the vertical transfer in the flat space of the joint logistics terminal, which is the base technology for transporting cargo using the transfer robot to the destination designated as a freight-only urban railway vehicle. Therefore, this paper aims to derive holistic viewpoints needs for design requirements for vertical and vertical transportation machines and freight transportation standard containers, which are underground railway logistics transport devices to be constructed by urban logistics ecosystem changes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.57-69
• /
• 2007

The most important problem in logistic activities may be to decrease the transportation efficiency due to the traffic congestion in urban areas. The traffic congestion reduces the average travel speed of freight vehicles, and then increases the travel time. These problems can lead the logistic system to be inefficient. As a result, it causes an increase of transportation costs. In addition, the increased cost is a main barrier for the transition to an advanced logistic system. This study focuses on the analysis of key factors choosing commercial freight vehicles using Logistic regression-analysis with RP (Revealed Preference) data to solve the increase of private freight cars and transportation costs. Additionally, this paper presents policies to promote good use of commercial freight vehicles based on the results of this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.22-27
• /
• 2020

In this paper, we study the methodology to improve productivity and transportation efficiency simultaneously in the manufacturing environment of injection plants which has multiple injection machines arranged in parallel. In general, the post-processes such as finishing are continuously arranged in the injection machine located in the lower level of the injection plants, and one or two workers in charge of post-processing are always arranged. Therefore injection plants have low productivity due to post-processing and the front of the injection machine is very crowded due to various logistics flows. In this paper, we propose the designing methodology of conveyor structure for integrating the post-processes arranged at each injection machine and transporting the injection products to the integrated post-process automatically. Specifically, we propose the models for computing the number of conveyor units into the integrated processes, and for finding the optimal combinations to connect each machines and the conveyors. The proposed model is for the total productivity improvement, which are productivity and transportation efficiency. By applying the proposed model to companies that produce injection parts used for the home appliances, we verify the applicability and the effect of improving productivity and transportation efficiency, which more than 40%.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.27-38
• /
• 2014

Recently, urban and transportation planning for Transit Oriented Development(TOD) has become a major issue. For the effective policy implementation of TOD, it is important to understand the travel behavior of residents in housing areas. In this study, we compared the travel behaviors of residents by housing types based on 'the 2010 Household Travel Survey Data' focusing on metropolitan areas. By building an estimation model for subway trip frequency by housing types, it was identified that the factors influencing subway trips and ultimately suggested implications to increase the use of the subway. The highest share of bus mode was for detached house residents with 22.8%, whereas the share of subway mode was highest by efficiency apartment residents with 17.5%. Walking distance to the subway from efficiency apartment and row house were verified as 661meters and 749meters. As the residents of each housing type have more cars and bicycles, their subway trips were decreased. It was also found that subway trips were increased when the population density of residence was high with good accessibility to subway stations and poor accessibility to bus service. In this study, the statistical findings to differentiate the planning factors of public transportation by housing types were also provided. The results of this study would be used for urban design considering the travel behaviors of residents by housing types and can also be utilized for promoting the patronage of public transportation. Some limitations and a future research agenda have also been discussed.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.11a
• /
• pp.245-252
• /
• 2012

Internal engine is the main power source of vehicle and is the main source of air pollution. To satisfy this getting rigorous emission regulation, it must be solved simultaneously the dilemma of reducing emission gas and increasing heat efficiency. Diesel engine is preferred compare with gasoline engine in aspect of energy consumption but it must be solved reducing the containing of NOx, CO and HC. In this study 1. Looking for alternative of performance improvement of Exhaust Gas Recirculation(EGR) which is emission gas reduction system, 2. Reducing malfunction of controlling emission gas 3. Made possible precision control.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.37-41
• /
• 2017

In the development of means of transportation, human beings who walk, ride or ride carriages are now enjoying the benefits of many means of transportation, including bicycles, airplanes, trains, buses, and cars. In the case of automobiles among various means of transportation, there is an advantage that an individual can conveniently move while possessing it. To solve air polution problems at the same time, eco-friendly automobiles such as low-noise, low-pollution, and high-efficiency automobiles have emerged. However, in the case of eco-friendly vehicleJ, engine noise at low speeds is a noise that is unlike existing vehicles and poses a threat to the safety of pedestrians. In this study, virtual engine system has been developed to prevent engine accidents caused by low- The pedestrians are aware of the fact that the vehicle is approaching.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.1
• /
• pp.1-14
• /
• 2009

The efficiency of transportation requests fulfillment can be increased through extending the problem of vehicle routing and scheduling by the possibility of subcontracting a part of the requests to external carriers. This problem extension transforms the usual vehicle routing and scheduling problems to the more general integrated operational transportation problems. In this contribution, we analyze the motivation, the chances, the realization, and the challenges of the integrated operational planning and report on experiments for extending the plain Vehicle Routing Problem to a corresponding problem combining vehicle routing and request forwarding by means of different sub-contraction types. The extended problem is formalized as a mixed integer linear programming model and solved by a commercial mathematical programming solver. The computational results show tremendous costs savings even for small problem instances by allowing subcontracting. Additionally, the performed experiments for the operational transportation planning are used for an analysis of the decision on the optimal fleet size for own vehicles and regularly hired vehicles.