• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.47-52
• /
• 1999

The methods currently in use to evaluate traffic impacts on the transportation network involve some fundamental shortcomings. First, the methodss do not properly take into account regional and local traffic impacts on the transportation network simultaneously. Second, temporal distribution of traffic, a major contributor to transportation problems, is not accurately accounted for. Third, traffic impact studies require costly and labor-intensive efforts to collect necessary data and to establish to collect necessary data and to establish traffic impact models. In this research, a new method called AMIS is developed for congestion management, access control, and impact simulation to overcome the shortcomings involved in the current methods. The new method is designed for a variety of scenarios such as access management strategies, land use policies, traffic impacts, and other congestion management strategies. This method can effectively be used, with little modification, anywhere in the United States. It is an improvement over the current traffic impact simulation methods that produces more reliable and accurate traffic impact estimates. The case studies conducted in this research have offered evidence that the new method, AMIS, is a credible congestion management tool. Most importantly, a case study presented in this paper illustrates how the new method can be used not only to estimate regional and local impacts of alternate supply management policies in the course of a day, but virtually on an hour-by-hour basis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.4
• /
• pp.345-352
• /
• 2012

This paper proposes a new method to reduce 120Hz output voltage ripple of LLC converter using resonant voltage controller. This method can reduce the 120Hz output voltage ripple with very high gain at this frequency by the resonant controller with previous PI voltage controller. The reason why the voltage ripple can be reduced is explained by the Bode diagram comparing with the previous PI controller. The simulation with Matlab/Simulink is carried out for this resonant controller and the simulation results show that resonant controller can reduce the 120Hz output voltage ripple. Experiments with DSP controller also carried out and the experimental results also show that the usefulness of the proposed voltage controller.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.31-39
• /
• 2014

Recently, as Intelligent Transportation System (ITS) and self-driving system become influential in the ground transportation system, automotive radar systems have been actively studied among the various radar systems to implement the vehicle collision detection system and distance measurement system between vehicles. Most of the automotive radars are Frequency Modulated Continuous Wave (FMCW) radar type which can calculate distance and velocity of target by estimating the frequency difference between the transmitted signal and received signal. Therefore, accurate frequency estimation is very important in the FMCW radar system. For this reason, to improve the measurement accuracy of the FMCW radar, Reverse Directional FRI (RD-FRI) Super-Resolution technique which has high frequency estimation accuracy is applied to the FMCW radar system. The feasibility of the proposed technique is evaluated with simulation results and compared with FFT and conventional Super-Resolution techniques. The simulation results show that the proposed technique estimates the frequency with high accuracy and the distance with centimeter accuracy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1467-1472
• /
• 2014

This paper study on powering characteristic on speed variation of propulsion system of prototype 8200 electric locomotive propulsion system through simulation modeling. For this purpose, it being applied in the field of railway IGBT (Insulated Gate Bipolar Transistor) elements are used. Converter was performed PLL (Phase-Locked Loop) control method that is used to control the phase and output voltage, and the inverter was carried an indirect vector control method to control the speed of traction motor. The results of simulation by modeling and experimental unit, we was confirmed that converter is controlled a unity power factor and output voltage by reference voltage. Also traction motor was controlled by indirect vector control and SVPWM inverter switching method very well.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.81-92
• /
• 2002

An automobile crash with a pedestrian generates a trajectory which is crucial to identify the cause of the crash. Previous researches have been carried out for pedestrian movement using simple explicit formulae. The formulae are derived from elementary physics. Therefore, they could not sufficiently include variables of a vehicle and a pedestrian. To overcome such a limitation, a simulation is utilized for the pedestrian behavior in crash environment. A dynamic software called MADYMO is utilized for the simulation. A simulation model is established. The automobile body and a dummy are modeled with rigid bodies, joints and springs. The simulation results are compared with those from explicit formulae. It is found that the explicit formulae did not fit to pedestrian conditions. Simulations are performed for various velocities of automobiles. Results are discussed for the usage of the simulation.

• Journal of the Korea Society for Simulation
• /
• v.6 no.2
• /
• pp.59-69
• /
• 1997

This paper proposes a simulation method of train control system to increase railroad transportation capacity in the Seoul Subway. Comparing with the conventional fixed block system, a new train operation method of "moving block system" shows a more capability of same railroad. A graphic simulation program is developed for application of moving block system to Seoul subway train control system. The result of the simulation program shows a shorten headway i.e. a more dense operation of trains and a higher efficiency of railroad with the suggested moving block system.

• International Journal of Fluid Machinery and Systems
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2014

The propellant acquisition vane (PAV) is a key part of a vane type surface tension propellant management device (PMD), which can manage the propellant effectively. In the present paper, the fluid transportation behaviors for five PAVs with different sections were investigated by using microgravity drop tower test. Further, numerical simulation for the propellant flow in a PMD under microgravity condition was also carried out based on VOF model, and showed the similar flow pattern for PAVs to the experiment. It is noted that the section geometry of PAVs is one of the main factors affecting the fluid transportation behavior of PMD. PAVs with bottom length ratio of 5/6 and 1/2 have larger propellant transportation velocity. Based on the experiments, there were two stages during the process of propellant transportation under microgravity environment: liquid relocation and steady transportation stage. It is also recognized that there is a linear correlation between liquid transportation velocity and relative time's square root. Those results can not only provide a guideline for optimization of new vane type PMDs, but also are helpful for fluid control applications in space environment.

• Industrial Engineering and Management Systems
• /
• v.9 no.4
• /
• pp.294-302
• /
• 2010

There is a trend toward the world's manufacturing sites moving to East Asia. After manufacture, these products are transported to the advanced nations for their consumption demands. Among such advanced nations, the U.S.A. has the largest demand, and then Japan and European countries follow. It should be noted that the infrastructures of the Asian districts used for the production sites are rather limited, and the volume of products transported from these districts of Asia to the U.S.A is becoming tremendously large. This situation is causing very serious traffic problems. New products are required to be transported swiftly by air. Once the consumption and market demands are stable however, the products should be sent rather slowly, but in larger amounts. However, the airports of China are quite restricted in capacity, while the transportation volume is becoming large. As a result, transportation cost and the time required for transportation are increasing. Now, a third method is appearing. This is the so-called Sea and Air transportation. The cost and time in transit of this mode take mean positions between Air and Ocean services. At present there exists no well-thought-out strategy for how to allocate these three methods of transportation. This paper is an attempt to theoretically describe this mechanism and to discover the optimal way to allocate the three modes. For this purpose, several mathematical properties of value and cost of the products are defined, and on this basis a simulation of the transportation is established.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.183-200
• /
• 2022

A variety of simulation approaches based on automated driving technologies have been proposed to develop traffic operations strategies to prevent traffic crashes and alleviate congestion. The maneuver of simulated autonomous vehicles (AVs) needs to be realistic and be effectively differentiated from the behavior of manually driven vehicles (MVs). However, the verification of simulated AV maneuvers is limited due to the difficulty in collecting actual AVs trajectory and interaction data with MVs. The purpose of this study is to develop a methodology to evaluate the suitability of AV maneuvers based on both driving and traffic simulation experiments. The proposed evaluation framework includes the requirements for the behavior of individual AVs and the traffic stream performance resulting from the interactions with surrounding vehicles. A driving simulation approach is adopted to evaluate the feasibility of maneuvering of individual AVs. Meanwhile, traffic simulations are used to evaluate whether the impact of AVs on the performance of traffic stream is reasonable. The outcome of this study is expected to be used as a fundamental for the design and evaluation of transportation systems using automated driving technologies.

• Journal of Korean Society of Transportation
• /
• v.10 no.2
• /
• pp.25-42
• /
• 1992

The purpose of this paper is to construct a model to compute a progression adjustment factor on a signalized network. In a way to construct the model, a simulation method is introduced and the TRAF-NETSIM is used as a tool of simulation. The structure of the network chooses an urban arterial network so as to measure the effect of progression and compute average stopped delay on each link. A regression model is constructed by using the results of the simulation. The stepwise variable selection in the regression model in used. The findings of this paper are as follows: i)The secondary queue and platoon ratio are sensitive to the values of the progression adjustment factor ii) The continuous model can practically reflect on various situations in the real world. The platoon adjustment factor can be computed by this model and the data required for this model can be easily obtained in the field.